Related
The current version 1.60 of the ROM includes already a virtual serial port but unfortunately it is a dynamic port, which is not visible to many applications. Also the ActiveSync support is difficult and complicated to use and if you want to synchronize with different computers you have always to couple the device again.
For future releases I plan the following improvements:
Support for Bluetooth headsets
Support for Bluetooth network access points
Send contacts and files through Bluetooth
http://www.angeltowns.com/town/bluetooth/
i am looking also for handsfree bluetooth support if any help on that
Yeah, headset works fine, it's the handsfree profile we need, that's the one adding enhanced features....
Do you know why some headsets work better than others? I understand that the profile does not work and therefore you can not use the functions on the headsets, but I'm curious if your recent fix will help headsets such as the Jabra BT250 communicate better with the device. The HBH-65 has no issues, but Jabra does note, often very slow to connect. I like the Jabra because I can hear better-age you know.
gratefuled said:
Do you know why some headsets work better than others?
Click to expand...
Click to collapse
Maybe because of the headsets itself ? I bought a HBH-35 and can do [/quote]anything with it, walk out of range and back, turn it off and on, reset the MDA, chanrge the headset etc etc. without having to re-pair...
I understand that the profile does not work and therefore you can not use the functions on the headsets, but I'm curious if your recent fix will help headsets such as the Jabra BT250 communicate better with the device. The HBH-65 has no issues, but Jabra does note, often very slow to connect. I like the Jabra because I can hear better-age you know.
Click to expand...
Click to collapse
What headset-functions do you mean ? Caller ID ? Voicedial etc. ?
That's not in the headsetprofile, that's in the handsfree profile. the headsets with enhanced functions use the handsfreeprofile also, nut just the headsetprofile...
downloaded and installed 1.0.1.2 fantastic my new bt gps works! However I can not use my gps and hbh-65 headset at the same time, any ideas please
Simply stated I was wondering if the new blutooth fix might help the Jabra BT250 work better. I know other headsets work without issue, but Jabra seems to have some problems, and I doubt that this is a Jabra problem, I believe it is a BT Device profile issue.
Can I have another link to the software cause the link is blocked from my ISP, or can any body upload it here or any other palce...
Best regards,,,
I have a new HBH-200, it works ok to answer a call but all the other features are not working, such as caller number etc.
Like i said; It's not i the headsetprofile. The headsetprofile doesn't do much except making a wireless headset possible. Answer, dosconnect and talk and listen, that's all...
Everyting else is in the handsfreeprofile (handsfree is used for advanced options for headsets and carkits)...
Link down????? :?:
not for me
Handfree Profile
I have 2 phones, XDA II and a Nokia 8910i.
My bluetooth Headset is the Ericsson HBH65.
To my surprise, I have paired the HBH65 with both phones and I am able to receive calls from both phones (not at the same time of course) without any problems. Whichever phone rings first get the use of the HBH65. In conflicts however, the Nokia seems to have priority over the XDAII, which is fine with me, but I am so happy that it actually works.
As others are mentioning, I am really missing the enhanced functions of the Handsfree Profile. Can anyone suggest any solution or perhaps work on resolving this issue as a lot of people are waiting for this. I was aware that Towas was planning to release a new version to his BT Stack Fix, has he got anywhere with that by any chance? or anyone else?
Hey guys. I have an XDA II and the Motorola Bluetooth headset. I gave up trying to use the headset before the updated XDA II ROM as it was very temperamental to say the least. Now I have updated the ROM its much better but I still have problems. If I am dialling out and put the headset on first then its fine, transfers to the headset etc. If I am wearing the headset and then take a call its fine, transfers to headset etc. But if I am not wearing the headset, say it’s in its case and the arm is closed then I get a call, I open the arm and stick the headset on and answer a call and nothing. Wont transfer to headset and I need to use the phone. Not good when driving! Is this still a XDA II problem? Have I set it up wrong or is the headset not working right? Bascially I need to have the arm open on the headset at all times for it to work like it should (like it did on my T68i) and its very annoying? Any ideas?
This is the headset http://www.motorola.com/mdirect/software/ss_html_docs/bluetooth/bluetooth_headset_info.pdf
Thanks in advance
Have you installed bluetooth tools? Unbond your headset then rebond after installing bluetooth tools.
What the best place to get the bluetooth tools from? Sorry if this has already been asked. And are they free??
Thanks
Yeah I did try bluetooth tools but it did not seem to make any difference maybe its just my headset, it was like one of the first Bluetooth headsets out :? I dunno...
You can get Bluetooth tools from...http://www.angeltowns.com/town/bluetooth/
And it seems to be free
Thanks for that.
However, I could not find the settings button, Just a display on the screen. What are the 1 & 2 buttons for??
:?
Yeah the only changes you see are when adding new devices like headsets etc as far as I know. I thought the same as you, went through all the options looking for it hehe. Those two things on the screen are something to do with selecting different settings for bluetooth to conserve battery like always on or auto off. I am not too sure as I removed it when it did not fix my problem!
Yeah, I removed it too. It caused me all sorts of problems with connecting my bluetooth jabra bt200!
ive searched for ck-7w in the hermes section but finds nothing? surely others must use this handsfree kit?
Well my issues, my hermes wont find it when searching for bluetooth devises? Never had any issues with my wizzard?
ive tryed a few different wm6 roms, now on the black.
Is there a cab somewhere to fix this, as i cant, use this phone until i get it sorted with my car kit
Hi fil,
I can't speak to WM6 but my 7W works well (usually) with my 8525 WM5 ATT Upgrade Rom. I remapped the ptt button to activate the built-in voice dialing. Sometimes the system announces the name throught the 7w speaker, other time via the 8525 speaker. Who knows why?
The quality of the recognition software is fair. I am planning on re-recording some of the voice tags in the car via the 7w mic. I have a feeling this will result in greater accuracy. It has to do the the acoustics where the tags are recorded.
My BT settings in the 8525 are
Mode = Turn on BT and Make device visable
Devices = add new device, if it finds it, click on Nokia CK-7w & check off Hands Free, at the bottom of the screen hit Save
BTW, the 7w data cable 5 volt lead does not have enough balls to charge the 8525.
Let me know if you get WM6 working with the 7w.
Lyle
You've already tried to reset the CK-7W ?
Especially when your Nokia Carkit has an other mobile paired in his memory (an old one for example) it won't pair the Tytn.
Worked for me (reset CK-7W).
After that my carkit works fine with yhe Tytn but has proplems if I wan't to pair a second (Symbian) phone.
alylea, my tytn wont even find it, when searching, have ticked the make seeable to othe devices, the method you discribe works perfectly as said on my wizard
davw, reset the ck-7w how?
tho the ck-7w can do up to 7 phones in its memory i belive, had no issues with a wizard and 2 different nokia all paired on it allready?
davw said:
You've already tried to reset the CK-7W ?
Especially when your Nokia Carkit has an other mobile paired in his memory (an old one for example) it won't pair the Tytn.
Worked for me (reset CK-7W).
After that my carkit works fine with yhe Tytn but has proplems if I wan't to pair a second (Symbian) phone.
Click to expand...
Click to collapse
again how'd you reset it? dont have the manual
still aint working, see unable to see the kit!???
anyone?
right its working now?, done nothing different?
was sitting in my car thismorning doing a bluetooth search for my new stereo headset i picked up from the PO on my way to work, it found it and the carkit , and paired with both!
well problem solved, but **** knows how ???
No idea what did the trick but here is the Nokia Europe site for the manual.
http://www.nokia.co.uk/A4222096
So iGuidance voice instructions do not come out of the CK-7W speaker not do the voice dialing confirmation names, although basic HF function works. I'm testing an inexpensive application that routes all audio from the 8525 to the BT output. I'll let you know if it works.
Hi guys! This is my first post here, so please help me!
I wish to know if it's possible to connect my HTC TyTn to the Parrot CK3100 and to listen TomTom's indications through the car stereo instead through the TyTn itself. Is there a way to do that?
Thanks a lot!
Bluetooth Carkit Parrot CK3100 and TyTn Reply to Thread
foggypunk said:
Hi guys! This is my first post here, so please help me!
I wish to know if it's possible to connect my HTC TyTn to the Parrot CK3100 and to listen TomTom's indications through the car stereo instead through the TyTn itself. Is there a way to do that?
Thanks a lot!
Click to expand...
Click to collapse
Don't have Parrot....
What I use is JetWare Mobile bluetooth extension on my WM6 and it allows me to make and receive calls through my car stereo as well as use voice commander through my car stereo or use my Motorola headset to switch from listening to music on my PC and answering / making calls from my PDA (all automatically)... They have a beta on there site that will allow you to do this. From what I read of your message your only looking for TomTom and Phone so you may only need to use the standard version. The other thing that may be a problem is your car stereo not sure of its capabilities. My stereo has 2 bluetooth connections one for the phone and the other is for the stereo input. I paired the phone to the phone and the stereo to Voice Command (you could use TomTom instead) Sadly don't know much about GPS/TomTom and don't know if it needs voice commands, but do know you need to hear it. BTW its not free, but they have a trial period so you can see if it works for you.
Best of Luck!
I have an answer and a question...
If this was your first post I assume that you have the original rom on your tytn (wm5)
I could listen tomtom and mp3 files by Parrot's bluetooth (ck3100) when I had the original rom using this little app and modifying something in the registry (because the modifications of the registry that made by default this app does'nt works fine for me, read the threath for more info and or if you have issues)
http://forum.xda-developers.com/showthread.php?t=278778
Now have the back majik rom and works fine with parrot, it shows more info than before, but I've tried withouth success using the same method and tomtom doesn't speaks me by the car's sound system yet...
Someone can help me please?
thanks in advance
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Yeh, the Blue Angel is a bit strange with some bluetooth devices.
I have the following issues with WM6 on my BA, which did not exist with 2003SE:
1) When Bluetooth is active, the device turns on by itself every minute or so. I understand that this is a hacked "feature" to prevent the bluetooth from turning itself off. This is probably the most annoying thing about WM5/WM6. Is there any fix I am not aware of?
2) When I start from scratch and pair my carkit (Parrot), everything works OK, except that BA's sound putput, i.e. for Microsoft Voice Command, is coming from the BA instead of the car kit. This is too low a volume, to be clearly understandable in a car. With my Universal (also on WM6) this does not happen.
3) After pairing my Asus GPS, nothing works. If I delete all paired devices and just pair my Asus without being in range of the car kit, it will work. If both devices are turned on (car kit and GPS Receiver), none works properly.
I don't use my BA on a regular basis anymore, because I have my Universal, which works flawless. However, I see no paint in upgrading to WM5/WM6 if one ends up with LESS functionality than the original 2003SE.
The only feature I will be missing is the fact that no RAM memory is used, which means one does not loose everything when the battery drains.
Are there any tips to solve these three problems?
The WLAN "bug" is not really a problem: even with 2003SE I had to occasionaly start and restart the WLAN for it to work properly.
Cheers,
vma
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
problems i still have:
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- how can i find out what BT stack i have?
- i installed that Boradcom stack 1.7 without having any succes in getting my headset to work. with or without patch1 and htcheadset! any ideas?!?
- what excactly is that HTC HEADSET ADDON ?
please answer soon, any help is very much appreciated!!!!
thx in advance,
krz
1. Same here; i think is my hands free set limitation.
2. I get the same using the Broadcomm stack; use the MS stack.
3. Depends; if you use Broadcomm/Widcomm, you have an "about" box; if you use MS, i don't know.
4. i get it working, but with audio in hands free AND speakers; annoying.
5. don't know, try Google.
DANDANA said:
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
Click to expand...
Click to collapse
What Bluetooth Stack you use ?
First, I use the existing MS Stack on Helmi WM6. BT GPS and Handsfree couldn't run at the same time.
Second, I use Broadcomm Stack 1.71. BT GPS and BT Stereo could run at the same time, but Hands-free function didn't run at all.
Give me a light please.
your bluetooth headset
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
shazzy84 said:
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
Click to expand...
Click to collapse
Yeah, Bluetooth in BA really sux... you have to choose your bt handsfree wisely, make sure you try it on BA properly before buying it... currently I am using i clip II mini, and it is giving me the same behaviour as shazzy84's
KRZTF said:
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Click to expand...
Click to collapse
Well I found a way to solve the BTA2DP problem. It supports stereo & is just fantastic. you can find these by the following link http://www.teksoftco.com/index.php?section=freeware & this software works too http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52 (have to register to download). I prefer Teksoft freeware as I am using it. Sometimes it takes a while after a few toggle u get it right
Lost in China
I have a problem with a Chinese Dopod HS-01 BT Stereo Headset!!!
Phone works, but the Stereo Headset starts for a second or two and then it is gone!
Please, help!
Admire people who can bring an answer!
I myself only good in learning physical languanges. So need MP3 HeadSet!
Also using SuperMemo CE the most beautiful tool for language learnig!
Is there any other solution then to change the registry and the things?
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
No one to ask for help over here!
My MSN:
[email protected]
Skype:
janicic
MySpace:
www.myspace.cn/taijiyoga