Hi,
I am depressed. When I bought the MDA II a week ago (used) it had a problem that I didnt think would be so bad. The power button didnt work (which I didnt know when I bought it off ebay). So I though what the hell, I can do without it since you can use software to bootload. I updated to WM2005 and everything was fine. Did Buzz's RAM and DOC patches and ok until here. When I tried to install some apps and games I tried to install Age of Empires and try to run it. My Himalaya did crash and I had to remove the battery. When it started it shows me the T-mobile logo, the rom versions etc and then the backlight goes off and resets over and over again by itslef.
Now without a working power button I cannot go into Bootloader mode, since I cant go into the OS I cant run software to go into bootloader mode. I opened the device (I have no warranty anyways) tried to remove the battery but all data was store on the devices memory so I dont think that did much. I tried to figure out what the problem with the button was, but it is so small I cant figure out where the problem is.
So no warranty, no powerbutton and no OS. Exept of the fact that I am ****ed, its 7 o clock in the morning ( No I havent just woken up ) do you think that my Himalaya will every see the light again? If yes, how?
Thanks for reading!
you can try to format it first. just press camera, record, reset button. no need to press power button.
Thanks that worked! I had to clean the regestry as well though!
Related
Hi guys,
Got my Xda II Mini a couple of weeks ago and I've encountered a problem.
Every now and then, all of a sudden the power button stops responding. I press it, and nothing happens. The only way to get it working again is if I perform a soft reset. Once the soft reset is performed and the system reboots, the power button will work fine for a while until after I've used a random application (seems to happen randomly with applications) then the power button will stop working again.
Has anyone else encountered this problem? It seems to be a software issue as the button itself isn't physically stuck, and getting it working again is done by a soft reset. Could it be something I installed?
power button
Anyone help on this?
power button
Had the same problem with my mini several weeks ago ie intermittant not being able to switch it on or off. A real pain! Thought it would have to go in for repair. A (dreaded) hard reset fixed it and it has not been a problem since.
Would you be surprised if I said that I have NO power button on my Magician. Well, I have been using it without the power button since I got it. I use the soft reset to start it, and to permanently turn it off, I temporarily slide down the battery cover. I keep Button Lock in Off mode so that I can turn it on with any button.
I have done numerous firmware changes to the phone using USB and the power botton hasn't been a problem. The very reason I could have this phone was that its previous owner lost the parts of the power button and he gave it away to me.
Since people are talking about the POWER BUTTON, just thought I would share my experience (well can't really say that cos I never experienced one) here.
I had the exact same problem - I took the SD card out and boom.. worked like a charm again
Would love to know if this is the same problem.
Tom - www.mouselike.org
Fix found!
From the information posted on this forum, and an incident where my O2 XDA Mini was very low on batteries, I've put two and two together and I think I may have found a solution to this issue!
1. Start up your O2 XDA Mini with your SD Card taken out.
2. Once your Mini has fully booted up, put the SD Card back in.
3. Your O2 XDA Mini should work fine now, and no button lock problem!
My theory on why this works is that when you start up the mini, what happens is that the operating system recognises that the SD Card isn't that compatible and changes some settings. These settings changes in turn causes the button lock issue. Please correct me if I'm wrong
Yes Yes Yes
tekkaman, THANKS A LOT.
I just had the case this morning and your post saves my day
hi
i recently jsut received new xda mini s from insurance company after i broke last one, i cant make a claim within 6 months so i need help, i was setting up software last nite after clickin corparate mode and after i installed pocket controller i run the software on xda and clicked video settins and trest and now the xda has crashed and wont load past the operator screen do you know how i can resolve this prob
phone has been on for 22 hours now, shall i jsut drain the battery down some how and install it all agaain, i ahve tried hard resetting it that dont work and have tried soft erst that dosent do anythin
please help thanks
chadders said:
hi
i recently jsut received new xda mini s from insurance company after i broke last one, i cant make a claim within 6 months so i need help, i was setting up software last nite after clickin corparate mode and after i installed pocket controller i run the software on xda and clicked video settins and trest and now the xda has crashed and wont load past the operator screen do you know how i can resolve this prob
phone has been on for 22 hours now, shall i jsut drain the battery down some how and install it all agaain, i ahve tried hard resetting it that dont work and have tried soft erst that dosent do anythin
please help thanks
Click to expand...
Click to collapse
What method of hard resetting did you try?
If hard reset does not work get to the bootloader screen (multicolored) by holding down camera button and preset reset button.
You can then reflash your rom - does not have to be activesynced to do this - as long as you have a small 'usb' on bottom left of bootloader screen when connected to pc it should work.
I guess this is the rom thats already on your device ftp://[email protected]/Wizard/Roms/o2/Xda_Minis_Upgrade_v2.21.4.101.exe
whats the boot loader screen, all the phone loads upto is the bit before windows mobile shows when you first turn it on
comes up with 02 logo, jsut tried tgettin bootloader up does fone have 2 b off or on
chadders said:
whats the boot loader screen, all the phone loads upto is the bit before windows mobile shows when you first turn it on
comes up with 02 logo, jsut tried tgettin bootloader up does fone have 2 b off or on
Click to expand...
Click to collapse
Turn phone off - then press camera button and hold - press power on button whilst still holding camera button. Bootloader screen should come up (multicolored)
right so far i can do all the stuff u said what do i do once i have got the usb bit in the bottom left hand corner
chadders said:
right so far i can do all the stuff u said what do i do once i have got the usb bit in the bottom left hand corner
Click to expand...
Click to collapse
Just download the rom mentioned above - connect device to computer (does not have to activesynced) and run the rom intaller and the rom will install.
how big is the file
chadders said:
how big is the file
Click to expand...
Click to collapse
50mb or so, shall take a while to download :wink:
and once that has finished do i just install it and that will flash the rom will it and the phone will work again yeah
chadders said:
and once that has finished do i just install it and that will flash the rom will it and the phone will work again yeah
Click to expand...
Click to collapse
I certainly hope so
how long does it take to do this and what info will i loose off phone
chadders said:
how long does it take to do this and what info will i loose off phone
Click to expand...
Click to collapse
The rom install usually takes 10 mins or so - dont worry it usually stalls a while around the 70-80% mark a while - just wait and be patient until its 100%. It will return to factory condition so all your data will be lost i am afraid. If you have synced with outlook before your pim info can be restored from there.
i was only jsut settin it back up anyway and it didnt work just now the update but it dont the error revoery adn its working again done 75 so far
Just tried to upgrade my XDA mini to this new ROM (v2.21.4.101). Everything seemed to be going swimmingly - I installed the ROM and the thing booted up ok. I then did a soft reset before all the o2 stuff installed. I then went to do a restore (having previously backed up using spb backup) and it almost completed but then the mini s rebooted itself again.
Ever since, it will only get as far as a page which has most of the bar at the top of the screen (the signal strength icon, battery strength and GPRS indicator are all there), but not the start button. Underneath that is just a blue screen with the Windows Mobile logo. The backlight will come on if I press any of the buttons but otherwise it is not responding.
I've tried holding down the camera button and pressing the on/off button and also camera button and the reset button, but neither of them seem to do anything.
I've tried reinstalling the rom from the PC but it says it can't find my device.
Rather bizarrely, if I call myself from another phone, the device rings and says incoming call, so the thing obviously isn't totally dead.
What can I do to sort this out?
Cheers!
Ok, Ive got a new problem with my XDA Exec.
Opened it up and tryied to turn on the backlight and nothing. tried a soft reset, nothingtried a hard reset now it just sticks on the splash screen, the red writing comes up on the right and side and just hangs there forever!
Please help
You're stuck. apparently the only remedy is turning it in to repair. For most of us it is under warranty.
Just off the phone to 02. Theres sending me a new one via courier on monday. it's less than a day old.
Is this a comon fault with the Exec?
erm ... I managed to experience this problem.
I was trying to uninstall SPB GPRS thingy that comes with the O2 package, and it just wouldn't go. I ended up deleting the program files and getting an error when it started up, so I deleted the GPRSNotify file under Startup. It never worked again ...
I got the splash screen, tried soft and hard resetting and various permutations (including standing on one leg and while holding breath) ... nothing. Did try to install fresh ROM, but startup wouldn't get far enough to let PC load ROM over USB.
Ended up contacting O2 who sent me a nice shiny new one, as it was only three weeks old. This time I haven't installed GPRS monitor thingy, and I don't intend to fiddle with it again ... or at least until I've forgotten my lesson ...
Sorry i ment to give you guys an update on this. I did manage to get it working again, although i still accepted the new one the sent to me.
What i did was installed a new rom off the 02 website. at 1st the computer couldnt see the phone so wot i did was enter what i think was the programming side of the phone. i found the instructions on how to this on the net. i think i pressed the 2 soft keys and the light switch while pressing the reset switch with the stylus (i think that was the buttons but unsure as i cant find the page again) when the screen light up again there was some faint writing on the screen with the word serial or usb. Double clicked on the rom file and 30mins later my phone was revived.
Funny it was the gprs monitor that i too installed before the phone screwed up? ive since installed it again on the new phone and have had no problems with it since.
trickydickyd said:
I think i pressed the 2 soft keys and the light switch while pressing the reset switch with the stylus (i think that was the buttons but unsure as i cant find the page again) when the screen light up again there was some faint writing on the screen with the word serial or usb.
Click to expand...
Click to collapse
Otherwise known as Bootloader mode
Aye, thats the one.
Cheers
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
thierry86 said:
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
Click to expand...
Click to collapse
Since no hard reset is available... try removing the battery for the whole night.
If you do manage to get to windows then watch out for the startup folder, you're probably overloading the memory at startup.(htc home and psxut eat a lot at startup and windows as well)
i have removed the battery, sim and sd, and just left it there the whole night, but it still won't go further than the windows boot screen...
any suggestions ?
is is possible to do a hard reset by connecting it to usb and enter the bootloader somehow ? if yes, how ?
thanks!
hi,
have you tryed entering bootloader by the normal process?
"Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camera + Soft Reset, then release soft reset and keep pressing camera button till appear the Boot Loader.)"
regards
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
Okay then there is still hope.. When you have connected the device run an opdate tool like the NVID WM5 Rom.. that should work as a hard reset..
are there any working links available for this ? rapidshare seems to have disabled this...
thanks!
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
As long as you are able to enter bootloader then you can flash it with any old prophet rom. I had the same issue after installing WM6 rom. I used a Spanish rom on wiki to bring it back and then installed WM6 VII touch. So far it has worked well for a week.
HTC 6tab Home screen killed my 818pro!!!!!!
Here is what happened a few days back. My 818pro (aka prophet) suddenly heat up while not in use 3 days ago. I thought it was caused by the hot weather in my country (I was driving with aircond in full blast). The heating up eventually go away. Then 2 day later, after I put down a call, my phone just frozen / hung. Hence, I do a soft reset & guess what It never recovered & stop at the black screen with the dopod logo while restarting. Some service centre I visited told me that the main memory chip need replacement & reflash!!! I can't even see the window screen. I have use the HTC 6tab for 2 months & I am very sure it's the culprit here. Hopefully you are not having the same problem like me
Try plug in the ac charger before u do soft reset. My phone need it in order to restart after soft reset (after I started using the HTC 6tab Home Screen).
That is before my phone die yesterday
Hey Guys,
Although this is my first post i have been reading and reading up about my iMate Jasjam and all of the other stuff that goes with it... Now whats happened is ive gotten this phone/pda for nothing with a sound issue that ive now fixed , it was running a rom with windows mobile 6.5. It was fine for almost 4 days but out of nowhere it wouldn't come out of idle or sleep mode where the screen is black and you just tap the power button to wake it. So i turned the phone off and on and managed to get it to boot into windows mobile but it froze, after this it wouldn;t go past teh load screen. I then removed memory card , battery and sim , still no boot afterwards... I then attempted to use the SD card to boot an original rom onto the phone but it comes up with "loading" for a few seconds and then just sits in the tricoloured screen and won;t budge.
Unfortunatly it appears the phones never had the hardspl done on it so if i can revive him ill definatly do this so it doesn't happen again... If i turn the phone on now it just hangs on the first load screen , ive still got GSM but im not very able with utilising the table to solve my problem... i was wondering if anyone could shed some light on the best way to try and revive it! it's a great little phone and i was using it heaps and heaps , had and did everything i wanted and would be such a shame to see it go as i got it for nothing, repaired it etc..
Thanks in advance and my appoligies if this is a stupid noob question.
Mick
You could try a hard reset, hold both "soft keys" (above windows and ok keys) while hitting reset, then the "R" on the slide out keyboard then space.
You should also be able to flash it from boot loader. Hold the power and side ok buttons while hitting reset, and you should end up in the tri colored boot loader, flash the at&t stripped rom from there (found in my sig below).
Then you can load hardspl. Then you should be ready for some flashing. Just make sure to flash the stripped rom between the custom cooked roms, it will straighten out odd memory issues (no need to let the stripped rom configure, it seems just flashing it is enough).
Welcome to the world of playing and bricking/unbricking your device!