Hi
Is any chance to upgrade my wm2003 to wm2003se without usb cable?
I have 256mb sd card and pc card reader.
My device
mdaII
Rom version: 1.72.00WWE
Radio version: 1.17.00
ExtROM version: 1.72.165
bootloader: 1.06
sorry it's not this forum
yes
use SD flash method 8)
My imate jam had Kingston 128mb mmc card and it was running fine for about 1 month. yesterday i got a new kingston 512 mb SD card to use it with my jam.
I put my 128mb mmc card in a card reader and copied all the data to my computer. Now i removed the card and inserted the new 512mb sd card in card reader. I formatted the new card and copied the data ( of 128mb mmc card) from my computer to the sd card.
I put the 512mb sd card in my jam but it didnt recognize it. THen i put my old 128mb mmc card and jam didnt recognize it too. Its been a day and jam has not been recognizing these cards. i have tried formatting these two cards using Fat and FAT32. but still no success.
Here is the reading from my jam.
Settings-> About says that expansion slot is not in use
ROm Version: 1.12.00WWE
Rom Date: 05/28/05
Raio Version: 1.12.10
Protocol Version: 1337.42
ExtRom version: 1.12.128.WWE
what happened ? can anyone help ?thanks in anticipation
Maybe something like the memory card slot's contacts have some trouble probably happened while trying to remove and insert cards often or the other. Rule this out by switch off(sleep mode) your device and insert the card. If the device tries to find a card is inserted by the electronic contacts, it lights up the screen or turns it on.
Does it happen?
Regards
www.CartyStudios.com
^Pocket PC World!!!!
i found the solution
Yesterdat night, i inserted my 512 mb kingston card into my digital camera and formatted the card. Then i put the card in my imate jam and instantly it recognized it.
I think the problem is in my card reader ( or maybe in the usb cable which connects to card reader to the computer)
Hi I have a Qtek 2020 and I bought an sd card 1 GB but it doesn't seem to recognize it.. it keeps giving storage capacity of 15 mb??? what should I do???
I have this configuration :
1.66.02FRA
02/23/04
1.10.00
1337.18
1.66.142
Thanks
I was Upgrade my Imate-jam with Rom 2.03 TX WWE
But There are lot of bugs in this rom
so now i want to down grade my jam to its previous state but when i enter in bootloader mode Screen shows that
Serial
V 1.00
I plug my usb cable to jam but Serial didnot convert in USB some one told me to downgrade the rom through SD Card
I have 1 GB Kingston mini SD card but now what i have to do now nobody help out me to this trouble i tries lot of searches but invain.
Now i am getting in trouble with my jam kindly some body guide me whole process with files support because i have no files regarding Rom upgrading/Downgrading through SD Card
Thanks a lot..
Hassam Moin
[email protected]
[email protected]
Hello ,
I have a problem with I-mate JASJAM is storage card not installed
Rom: 2.11.255.1
Rom: 03/07/07
1.38.00.10
32.71.7020.12h
2.11.255.102
I hope to find a solution to that problem at the earliest .
Best regards,
eslamgamal said:
Hello ,
I have a problem with I-mate JASJAM is storage card not installed
Rom: 2.11.255.1
Rom: 03/07/07
1.38.00.10
32.71.7020.12h
2.11.255.102
I hope to find a solution to that problem at the earliest .
Best regards,
Click to expand...
Click to collapse
Need more information.
What size of SD card are you using?
What application tells you "no storage card installed"?
Are you using WM5 or WM6 Operating System?
Mike
1 ) What size of SD card are you using?
1 GB MICRO SD
2 ) What application tells you "no storage card installed"?
sotrage card does not read on Mobile..
Start > Settings > System > Memory > Storage Card >> Total storage card memory: Not installed
3 ) Are you using WM5 or WM6 Operating System?
WM5 (BUILD 15673.3.3.1)
Processor: SC32422-400MHZ
Memory: 49.05 MB
Expansion: Not in use
Thanks,
eslamgamal said:
1 ) What size of SD card are you using?
1 GB MICRO SD
2 ) What application tells you "no storage card installed"?
sotrage card does not read on Mobile..
Start > Settings > System > Memory > Storage Card >> Total storage card memory: Not installed
3 ) Are you using WM5 or WM6 Operating System?
WM5 (BUILD 15673.3.3.1)
Processor: SC32422-400MHZ
Memory: 49.05 MB
Expansion: Not in use
Thanks,
Click to expand...
Click to collapse
OK
That should work OK.
You may have a faulty card or dirty contacts on the card or phone contacts. Perhaps you could try inserting and removing several times as this can clean off the contacts. The card should insert smoothly and click cleanly into place.
Also, the camera application should offer you the choice to save to the storage card (if it detects a card). Just another way to see if it's being detected.
If all fails, try to access another card, at least that will let us know if it's the phone or the card.
You can also try re-formatting the card using a PC.
Mike
I had a similar issue when i got my sd card.What solved it for me was to insert the card,wait a few seconds,then do a soft reset with the card still inserted.When the hermes rebooted it recognized the micro card instantly
I had a similar problem after I enabled the network folder with Resco Explorer 2008. I removed that and it's been working for months now.
jman0 said:
I had a similar problem after I enabled the network folder with Resco Explorer 2008. I removed that and it's been working for months now.
Click to expand...
Click to collapse
Yes indeed and if you have the network folder enabled, the Camera for example, will never save to it despite it asking if you want to save to the card. (It will always revert to Main memory if the network folder is enabled).
Mike
has anyone solved this it wont work on mine either