Hi to everyone
I have an xda (i believe its a wallaby) modelpw10a1 ram64mb. I want to unlock the unit, but have no idea where to begin.... i did follow peters advice for unlocking an xda 2 via the cradle/activesync/disable usb port method but nothing happens (apparently windows should recognise new devise)
is there a program i can run to unlock the xda1?
Another thing - i have just moved abroad to Thailand, the local gsm network here is very good so it shouldnt make any difference once it is (hopefully) unlocked?
Thasnks in advance
Matt
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
http://wiki.xda-developers.com/index.php?pagename=XDAunlock
Stefan
problem downloading it
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
Stefan, thanks for the link. The problem now is that when i click on the link, i get a 'authenticode' warning pop-up that stops me from downloading it.... licsence could not be found etc etc.
Any clues?
http://wiki.xda-developers.com/uploads/XDAunlock.exe
Sorry, its the above link that wont let me download.
the link works just fine for me
Frustration
I managed to get the unlocking file, and copied over to my xda... but the first thing it says when i open it is 'error getting the unlock code'
Is there another file i can use? Am i using the wrong one?
tried this one?
http://forum.xda-developers.com/viewtopic.php?t=24779
Massive frustration!
I cant believe how hard this is. Have been on it all day! Everyone else on this forum seems to be unlocking easily, am i doing something silly here?
Thanks for the latest link Rudegar, but im having the same problem - it wont open. On clicking the link, Im asked the usual ''run file from current location or save to disk'' either one gives me the following error message;
''the publisher cannot be determined due to the problems below.....''
''authenticode signiture not found''
''access to the specified device path file denied''
So in short, i cant open it.
My friend sent me the XDAunlock zip file, i transfered to my XDA but it came up with
''error unlocking sim''
So thats obviously the wrong file for my XDA...
I read that the XDAunlock only works if it has the wireless feature? How do i find out if i have wireless or not?
Sorry for sounding so clueless here, but really i am not to sharp with this sort of thing. Ive allways used my XDA happily till i moved abroad, now im buggered if i cant unlock it!
Someone please help!!!!
i think the link i just gave to the allinOneUnlock thingy requires to be run from the pc while the xda is connected to activesync
tried that
Rudegar, appreciate you sticking with me here...
No, its not a question of the cradle being connected or not im afraid, i tried that allreeady with both the cradle connected and also disconnected. It just wont have it, im totaly lost!
by cradle do you mean that you have tried with
the xda connected to activesync as in being connected after the sync is finished ?
or have you tried the xda connected but activesync not connected ?
have you tried another sim card to make sure it's still sim locked ?
Related
Hi
I have been trying to use my XDA II as a modem and every time I try it give me a error. Error 692 Hardware Failure..
Can anyone pleasr help me with this?
I have a similar problem, please help!
I stopped trying via IRDA and set it up via the USB Sync cable, using GPRS. Works like a charm.
I was going cross-eyed trying to make it work and it wouldn't. Took about 15 minutes with the cable.
Is not working with the USB cable either
I had followed the instruction on PPC website (which seems identical to those on the XDA II official website):
http://www.ppcw.net/?itemid=1656&catid=80
but no luck... I'm still getting an error message... usually 732,
have you done anything different?
Please help Thx,
Chris
Did you successfully install the HTC USB Modem?
Was ActiveSync closed down, as it must be?
Did you use the USB Dialler program to make the connection?
Did it show the HTC USB Modem?
Was GPRS connected on the XDA?
Did you enter the correct User ID and Password?
A friend of mine tells me they're not necessary, as it works off your IMEI code, I've never tried it without them.
Dear ardarby,
Thank you for your help... here are my answers.
Did you successfully install the HTC USB Modem?
Yes
Was ActiveSync closed down, as it must be?
More than that: I disable USB a mean for active Sync to connect to the device, both on the PC and on the PPC
Did you use the USB Dialler program to make the connection?
Yes
Did it show the HTC USB Modem?
Yes
Was GPRS connected on the XDA?
I think so... how do I see it
Did you enter the correct User ID and Password?
Yes
A friend of mine tells me they're not necessary, as it works off your IMEI code, I've never tried it without them.
I am now getting an error which is something like error 734... any clue?
Thanks,
Chris
www.GB-SOFT.cz/XDAII
this tool should be able to tell you
So i installed WM2005 on my phone and now i get
device authenification failure....
please contact the product manufacturer. For reference please provide your device ID.
3546110002736801
68000050bf3f5173 8un
(yeah i know it's all my fault)
now i don't know how to get back. the only thing i can get to is the bootloader screen and i have a couple of roms but the only one will work with the mtty program that communicates with the phone are .bin files which i ddon't have. Any ideas guys? I kinda just want my phone back.
i am really confused as to why it doesn't work. maybe it's because its for the c500 only. but looking at this link
http://msmobiles.com/news.php/3848.html
there is one for the audiovox.
did you try to run the normal upgrade when the phone is connected via usb in BL?
i've tried the uk update but it says i need to be connected to activesync. boing to go buy a card reader today to try backing up from the sd card.
Hi
I am new here and i have problem
When i turn on my qtek9000, i recieve message Serial V.100.
If i connect USB cable it displays USB instead of Serial.
This happened when i tried to do radio upgrade (through usb hub, sim and sd were also in phone...).
I have 1gb SD card and also card reader mounted in laptop, so transfering files should not be problem.
Can someone help me with step-by-step procedure how to make my qtek work back. I used a lot of search but i am even more confused....
I just remember that when qtek worked Radio was something like 1.0.3.1 and also WWE was writen somewhere....
Probably i should put rom to sd with ntrw (which wersion of both),.......
please help....
might be a dumb question on my part - but have you tried a reset (initially a soft one but then a hard one of course, if nothing else works...) ???
I mean you will at least be able to revert back to the condition 'out of the package'...
Hope everything works out!
jup.both things NOT HELPED
looks like you're stuck in the bootloader mode....
try flashing the rom & the radio rom once again by connecting it to your laptop's usb...
i guess something screwed up while you were upgraging your radio rom...and you'd need to redo it!
Best,
San
can you please write me a procedure?
You might want to check the following thread. Everything is well described.
Cheers
hrb
http://forum.xda-developers.com/viewtopic.php?t=32725
i am trying to download files but i get permission denied all the time
You mean you get an error when clicking this link ?
ftp://xdaupload:[email protected]/Universal
I don't understand that, it works perfectly well for me
Cheers
hrb
I have solved problem with Radio upgrade. I am in much better mood now. 8)
Anyway i have 4 more questions.
1.) I am using bluetooth car-instalation Parrot CK3100. I am wondering if is possible to transfer any other sound except telephone conversations to that device. When i had Nokia 9500 i was able to hear every single click,tone,...i made on phone also on car-instalation. I also heard nokia ringtone in car instalation.With qtek i am getting generic car-instalation ringing tone instead of phone ringing. Otherwise primary intention (hands free talking) works fine. I would like to have that to be able to hear voices from various GPS software.
2.) Since QTEK9000 is PDA and phone in single unit I would like to have in car GPS application "always on top". Like previously mentioned i can easily manage my calls with car-instalation. Therefore i would like to run Phone section in background or GPS applications on top.I hope you will understand what i would like to say
3.) I also need in-car holder for qtek. Do you have any reccomendations?
4.)
My settings:
R: 1.04.02
G: 42.37.P8
D: 1.13.64.WWE
Is that ok or should i upgrade?
Stuck in bootloader mode
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks
Re: Stuck in bootloader mode
Bauser_uk said:
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks
Click to expand...
Click to collapse
try it with this file -
1. put radio.nbf and the file attached below in the same folder and run the exe with ur device connected to usb in bootloader mode...
2. hope it flashes it
S
Thanks DreamTheater
Thanks for your help - unfortunately I got the same message, ie this rom is not meant for this device etc...
Will see O2 can do anything (who's that laughing...???) - was going to buy a new xda mini anyway...!
1. REMOVE your SD/MMC card.
2. Soft/hard reset.
3. Run the upgarde again.
Step 1 above solved my problem.
my pc crashed so upon re-installing everything,i came to put active sync back on and when i attach my mda compact it dont find it,and asks for my windows ce or whatever its called cd.
i have spent two hours looking and its nowere to be found.
please help anyone know were i may get it downloaded,i have the windows code from it to prove im legit etc.
man im having a bad day.
hope someone may help as i cant back up my mda or add progs to it.
thanks very much,ta for reading
Try the uploads\app_suite folder on the ftp & download asi.exe (little surprise from TMO). Have you reinstalled the new Act.sync from M$?
Cheers, M
new err no mate
your a great help much appreciated thank you
sorry for being dumb guys but all thi stuff is new to me
how do i
uploads\app_suite folder on the ftp & download asi.exe (little surprise from TMO).
ive tired but must be gettin something wrong
thanks
Does this help ftp://xda:[email protected]/upload/App_suite/ASI.exe
page not displyed thats whay i keep getting?
Then start @ ftp://xda:[email protected]
found thanks for you time mate,sorry to be a pain thanks again
No prob. man but did it solve your prob?
my pc wont find the mda,it searches all port but fails to see its connceted,
ive tried unintsall and reinstall avt sync .
damn pc's ggrgrr lol
Correct cable, not by accident a look-a-like from a dig.camera?
nah deffo the one,i dont know wot else to try ggrr lol
Your USB port is functioning & Act.sync is allowed to use usb?
Have you tried to connect your magician to another PC via usb?
M
ill try that on another pc nice idea,
act syn runs but dont pick up the usb is used,ive swoped usb ports but to no effect,ill try another pc cheers mate
Have u got the windows cd for xperia X1
If u got it me post me to please me too lost it
tamimanieie said:
If u got it me post me to please me too lost it
Click to expand...
Click to collapse
you're wrong section !! This forum magician
You can search for Here what you need
---
download link please
Im running mod. 1.2 by DFT...Everything is running fine..My problem is that live isn't working .Im aware that I need to call M.S after a few steps...Ive downloaded the WP7 unlock tools and have read the tutorial mny times...The problem is after i've installed the certificate, & unlocked the phone & run the tom instaler. when I get to connection setup.xap, I get this message box: windows cannot open this file. windows needs o know wat program you want to use to open it. windows can go online to look it up automaticaly or you can look it up manually. what am i doing wrong here.. what step am i mssing..any help woul be appreciated
figured it out guys thanks problem solved
good for you! maybe worth writing on here the mistake or which step wasnt quite right, you probably are not the first person to have run in to this one and i doubt very much you would be the last
If other folk search for the same issue they would see your question and an answer on the first post, good for everyone!