Hi all,
i have a big problem with my Sandisk wifi and an Himalaya.
I have WM2003SE 2.06 and i got a lot of problems to connect to wifi ap.
I used both sandisk and microsoft drivers, but i got the same problem:
The ppc see the AP and try to connect, without success... i see "connecting" than back to "avaible"
Only after a lot of reset/remove insert sd card i got connected.
I tried dhcp/static wep/open, same problem.
anyone got this problem too?
Thanks
Try using the Socket drivers - it worked for me. I just need to find out how to get IE working properly!
Related
I got a SandDisk SD wifi with no memory that I use with my I-mate, or let me say I used to use , I've upgraded yesterday to wm2003se and installed the latest driver availble on sandisk website (Oct 03) and till now I couldn't connect to the access point...
Any help is apreciated.
Regards,
anyone please ??
RE
Hi!
Is I-Mate the equivalent of O2 XDA II? If yes, then I might have the answer
I was also having problem with my SANDISK SDIO WiFI card and my O2 XDA II with WM2003SE all these while since the upgrade until JUST NOW.
By a stroke of luck I manage to coneect it to my home DLINK router.
Go to START -> SETTINGS -> CONNECTIONS ->NETWORK CARDS -> NETWORK ADAPTERS -> Change the 'My network card connects to :' WORK (not internet)
Use cable to activesync your PPC to your Desktop PC making sure that the connection is there. Insert your WiFi card and see whether it connects. If not, de-active activesync, take out your PPC and soft reset with the WiFi card in place. Put it back into your cradle and allow activesync to proceed and see whether your card connects.
See whether this procedure works
thanks for your reply,
I tried what you have suggested with no luck :?
My network card tries to associate with no success
thanks anyway
RE
ArcticCat,
Sorry to mention. I was also playing around with this freeware, Hitchhiker, then and was connected. After which I deleted Hitchhiker.
Here,
http://www.kasuei.com/hitchhiker/
Try connecting via Hitchhiker and see whther it connects. Make sure you follow my previous procedure too.
thanks again for you reply but no success either
let me ask some question
1) You have a SandDisk SD I/O Wifi with no memory ??
2) what drivers are u using for it?
3) you have wm2003se installed
4) what was the problem before?
I am seeing the AP but cannot associate to it.... same thing with you?
Regards
RE
ArcticCat
Answers
1) I'm using SANDISK SDIO WiFi card without memory
2) I'm using SOCKET WLAN Tools Mobile Edition v2.01. Get it from Socket Communications
3) Yes, I've WM2003SE installed on my O2 XDA II
4) Same problem like yours, previously for a long time till last night. Can associate but cannot connect.
I'm using ActiveSync v3.8
I suggest you just play around with Hitchhiker and my procedure for a while. Reset and disconnect/connect activesync if you require. FI, Hitchhiker cannot connect too in my case.
Good luck
Now we have the same configuration with the only difference that I am still not able to connect :?
I didn't quite understood what do u want me to do with ActiveSync
thanks once more
RE
ArcticCat,
Did you get your SDIO WiFi driver here:-
http://www.socketcom.com/support/support_wlan.asp?Type=SDIO
The one for WM2003
Yes I did... NO luck today neither
RE
If you're able to get a copy of the new Socket WiFi Companion which is not released on its website yet you can give a try.
were u able to get it?? if yes can you tell me where from ?
thanks
RE
Can you pm your email address to me and I'll email to you.
However, use at your own risk as I've NOT try it yet
My Jam freezes every so often when i take out my Spectec wifi card. Has anybody else experienced this? Here is my procedure for taking the card out:
Exit all applications running, stop the radio and exit the wifi program. Then i wait about 10 seconds before removing the card. The Jam freezes after that.
I tried the E300 drivers from ampda but I could not get the Wi-Fi Companion to run properly. It would not recognize an IP even though it was connected.
I tried a search on this subject but without much success. I appreciate any help and I apologize if there is some obvious thread that I missed.
i`ve got exactly the same problem - anyone got a solution??
Hey guys, just got my MDA yesterday and I have a netgear at home.
Netgear, open access ...no security.
Got the MDA, and it shows it detects my netgear, but it will not connect, a constant display of connecting appears and than it goes away.
I called T-Mobile and that didnt help at all. They have no idea.
I updated my Rom to 2.26.10.2 WWE based on T-Mobile HotSpot tech support said.. But its not working.
I did several soft reset, but stlil it will not connect to the netgear router ?
Any idea ? what I can do ?
I changed all the settings and everything...
Please help
Ben
anyone ?
Anyone ?
Please help ?
I don't know what the solution to this problem is, but I have a similar problem. I have a qtek 9100, I need to reset my AP in order to connect. I only have this problem with my own AP (A D-link). I took op contact with Qtek, they have no clue.
I had the same problem when I had a screwed memory card inside the phone, i took it out and I could then use wifi.
I've noticed as well, that removing the SD card before configuring Wifi does the trick. Once it has been configured you can putt you SD card back in and connect without any problems.
Hi All
Does HTC Gene (P3400) have Wifi ?
eh_ansari said:
Hi All
Does HTC Gene (P3400) have Wifi ?
Click to expand...
Click to collapse
No it surely doesn't. You can have Wifi in Gene only useing SDio. Read more at http://en.wikipedia.org/wiki/Secure_Digital_card#SDIO
I have the SDIO 802.11b wifi card from C-Guys but cant get it to run on WM5. Is there any app out there that can make it work again?
i have SDIO 802.11b wifi card from Spectec which i bought from ebayer from HongKong, its just worked fine, signal is strong,no problem at all. its comes with the original driver for the sdio card, thats all.
Wifi not working properly
i have got a Just Mobile SDIO Wifi Card 802.11g for my HTC gene...but the working of it is very lethargic..i mean it takes a lot of time to connect to wifi at places i know where the signal is very strong...further can anyone suggest any button to enable the Wifi On and there is no such thing on my phone.
Further at times i feel the Edge network obstructs from connecting to wifi....i dont know kindly help
rexypow said:
i have SDIO 802.11b wifi card from Spectec which i bought from ebayer from HongKong, its just worked fine, signal is strong,no problem at all. its comes with the original driver for the sdio card, thats all.
Click to expand...
Click to collapse
just got the MINI SDIO WLAN card from spectec, and mini sd adapter from ebay.
I have signal about 40% quality 95% now, but there is popup window : can not find this page, please check the name and try again.
when I connect to the website such as google.com. what's wrong with my IE ?
my Gene has WM 6.
BTW, IE works fine with usb cable linked to pc
appreciate any help.
test another wifi link, it works fine.
Hi all.
Just received my spectec SDIO Wifi card to my Gene but I can't get it working!!
The spectec utility doesn't seem to like WM 2005 and it doesn't work.
Someone had the same problem?
Without this utility, is it possible to connect to a wlan??
HELPPPPPP!!!!
Regards,
!! Pina !!
Stay alife ?
Hi ,
I got HTC P3400 ( Gene ) upgraded to WM6 .. and I got the spected wifi card and work great in normal cases ..
I got this wifi card just to use SIP ( voip ) apps with my gene and it work little fine with fring ( hope to find something better )
BUT when my device lock ( turn screen to blank ) it CLOSE the wifi connection so I get DC from the sip server .. and if I canceled the turn off device feature it eat the battery ( I think so )
so I wonder if there a way that I make the gene keep wifi up all time even while the device is locked ?? ( do not know if it is stupid question coz it is so easy to be done or noway to be done .. I just hope someone could help me in that )
some help with fring
Hi willyhopa,
I aquire the sd wifi card to use with my p3400 and I can´t work with fring, they can´t find the wifi connection. Do you have the same problem?
How you setup your fring to use wifi connections?
Best regards.
After much brain hammering I finally got WIFI LAN to work on my HTC p3400 (OLD GENE).
You will need:
1. A WLAN SDIO card ( http://en.wikipedia.org/wiki/Secure_Digital )
2. A driver for that wlan SDIO card
The card I have has no brand information, so I used the FCC ID : S2Y - SDIOWLAN - 11B...
Searches came up with this driver, turns out the card is SPECTEC.
Install the driver (whichever it may be) on your GENE, try to get WM CommManager if you don't have one.
Get a nice decent web browser
...and you're off!!!
--here's the driver I am using--
hmm seems it is working but i dont have gene will wait for others reply
WiFi on Gene
I tried installing on Gene, but wondering how and where to configure my Gene so that it detects WiFi network in either office or home
HIFTA said:
just got the MINI SDIO WLAN card from spectec, and mini sd adapter from ebay.
I have signal about 40% quality 95% now, but there is popup window : can not find this page, please check the name and try again.
when I connect to the website such as google.com. what's wrong with my IE ?
my Gene has WM 6.
BTW, IE works fine with usb cable linked to pc
appreciate any help.
Click to expand...
Click to collapse
Hey, try changing simcard and then replacing it back. This will reset your network settings and the IE will work again.
wifi in HTC p3400i
sid.nir said:
After much brain hammering I finally got WIFI LAN to work on my HTC p3400 (OLD GENE).
You will need:
1. A WLAN SDIO card
2. A driver for that wlan SDIO card
The card I have has no brand information, so I used the FCC ID : S2Y - SDIOWLAN - 11B...
Searches came up with this driver, turns out the card is SPECTEC.
Install the driver (whichever it may be) on your GENE, try to get WM CommManager if you don't have one.
Get a nice decent web browser
...and you're off!!!
--here's the driver I am using--
Click to expand...
Click to collapse
nice to hear tht...bt frm where i'll get tht wifi SDIO??how??how much it costs??
You can find this card here:
http://cgi.ebay.com/SPECTEC-SDW-822...temQQptZPDA_s_Pocket_PC_s?hash=item53e019c101
hey sid where did u find this card in india?
online or a local store?
hey bro..
want to buy sdio card for your gene??
mail me jayeshvasani_2007(at)yahoo(dot)co(dot)in
i am from india-gujarat
hey can anybody tell me how to buy his sdio card here in delhi or in bangalore
thanks pls reply!!!!!!!!!!!!!!i wanna have wifi on my old gene much more than storage card
I don't think you'll find them in any shops...
Try looking in your normal MOBILE SHOPPEE type places....
IF you cannot find anything in shops, then try this link:
http://shop.ebay.in/i.html?_nkw=sdi...or+gene&_osacat=0&_trksid=p3286.c0.m270.l1313
Hie there,
After a lot of problems with my Spectec Wlan sdio card, i've removed the driver and installed the modified E300. So far so good. The new driver connects to my AP.
The problem is that it can't get into the internet.
My laptop can, so it's not the AP.
Also, i've notested that even after removing the Spectec driver, when I go to /settings/connections/connections/advanced/network adapters/, in the list I see the new "Socket WLAN SDIO v2 Driver" but I also see the old "WLAN-11b Adapter" in the list. I believe that this may be the problem.
If so, how can I remove the old driver from this list?^
Thnx
Oops, my bad.
Of course it was the wep key not inserted.
Anyway, stil, how do I remove the old driver form the network card list?
And also (sorry 'bout being pushy), now that I can connect to the internet, i've notested that sometimes (really a lot) when I insert the card and get connected, after a while I take the card off and if I put it back again it won't work. I have to softreset for it to work again. It's very annoying.
Everytime I take the card off i need to softreset before put it back on.
How can I prevent this?
Thnx