hi, i use the Windows 2003 SE as my ROM, i've been using it for more than 4 months, but now i facing the problem, my phone (O2 XDA) is not stable, sometimes it takes times to make a call, and some call cannot be picked. and the sms most of the time delayed (once i restart my phone, all the sms coming) so is there any solution for my problem? of is there any way to revert back the ROM to the original ROM (that is from the O2)?
Best Regards,
Freddy
Just download the ROM and flash your Wallaby.
Where is the problem?
Stefan
Where i can get the original ROM ?
o2's site is a good bet i guess
or maybe LumpiStefan's kichen have the rom version your device came
with if you then just dont add any extre stuff it would be the same as the device was when you got it
Check this site:
http://wiki.xda-developers.com/index.php?pagename=ROMVersions
Stefan
awsome ~! hehe,.... Thanks a lot dude ~!
Related
I have a WM2003 (ROM version A.30.09 ENG) on my SX56, that I had upgraded after putting in the SER to unlock the phone. Now WM2003 is much too buggy for me!
- the phone rings just once on an incoming call
- the system hangs every now and then
- apps take too damn long to start up
- ring volume is not very high
and on & on & on.......
I'd like to upgrade something more stable - either WM2002 or 2003 (if there's a stable version out there). Did go to LumpiStefan's kitchen but there are several options within the 2003 ROM's itself.
Can someone pls recommend to me which ROM would be best for me. And can I put in a T-Mobile ROM into the SX56?
TIA
Omi
A30.09 is known to have some issues with the sound.
TMO 4.01.00 is a very good and stable ROM, and yes you can use it with SX-56 device as long as you don't touch the RSU.
Thanks Biso007.
OK, so if I go to LumpiStefan's kitchen and cook a ROM there and put it into the phone, I would only be changing the PDA OS (and not doing anything to the RSU), correct? Just want to be sure before I go and experiment
Omi
How about the 4.01.16 ENG ? The kitchen says that it is the official TMO release? Can I go for that, since it guess it is the most recent release ?
Omi
4.01.16 ENG is working perfectly!
I would strongly recommend this ROM.. its WM 2003 version.
AND, I recommend the SD Card method.. flawless installation!
Question regarding newer ROM for the SX56
I have the older ROM and have not experienced any problems with anything that was mentioned. Am I just extremely lucky or is thing something I should expect to arrive shortly, considering I downloaded my newer ROM recently from the Siemens Site. I use everything on my phone and have no problems at all, only sh_ _ _ _ signal strength, damn AT&T! I would switch but still own then a year on my contract, so I won't go on and on about that.
Please let me know the pros to this newer ROM, at least in terms of stability and performance, if that is possible from someone that has loaded it.
Oh - one more Question...
Would I have to reload all my installed applications after flashing my ROM, or can I simply back them up and then restore them from backup without having to enter all the keys, and licenses that you would normally have to put in on the installation?
Thanks!
mraj said:
4.01.16 ENG is working perfectly!
I would strongly recommend this ROM.. its WM 2003 version.
Click to expand...
Click to collapse
Some people encountered problems with 4.01.16, so I didn't want to risk especially that when I checked the system files and DLLs of this ROM I found that they are dated the same as the 4.01.00 ones!!
chalil said:
I have the older ROM and have not experienced any problems with anything that was mentioned
Click to expand...
Click to collapse
I 'm refering to A30.09 and its known sound bug (clipping) ... which ROM you mean ??
Wokay, 4.01.00 it is then
Thanks everyone, especially Biso007, appreciate your help.
Omi
Thaks everyone for your help, successfully upgraded to 4.01.00, though i lost all my contacts :-(
I had backed them up on a SD card and when I tried to restore that after upgrading, nada!
any ideas how i can get them back (i didn't sync with oputlook before the upgrade).
Omi
SD backup can be restored only to the same ROM version
It's a silly task if you really want your contacts back (long list I mean) .. flash your ROM to the old version, restore the SD backup, sync with outlook, flash the new ROM version, sync with outlook again ...
Don't you think that keying your contacts is easier ??
I have just got my xda back from being fixed by O2 and they seem to have upgraded my rom.
Before I sent the xda to them the rom was simply the latest ppc2002 rom from their website.
However now everything has changed and my rom version is 4.01.12 ENG
This seems to be an official release form O2 as I have their auto configuration and boot screen.
My bootloader has also been upgraded to V5.22.
I have backed up the rom using XDATools and hope to upload it to the site although its approx 31mb.
This seems to be all official and what everyone has been waiting for however if i've completly missed the point please let me know (politely please )
As an added note I have two broken xda's for sale: -
1) A 64mb XDA with the above rom installed. The screen is smashed, and will need replacing, or you could just use the motherboard in another xda. The unit does not charge for some reason, possibly the fuse which is a simple enough fix.
2) A 32mb XDA with the above rom installed. The screen is intact, however will most of the time it will only display lines, you can get a screen sometimes but this is very rare. It must be possible to fix this, but its way beyond me. Again the motherboard has been tested in my other xda.
Please email me at [email protected] if you would like to make me a serious offer.
Thanks
Martin.
So how do the rest of us get it. Do we have to send our XDA's back to O2?
So did you uploaded the ROM yet? can you provide us a link? thanks
::adit
Don't forget the main question. Does this version incluudes the wmodem application????
Already wrote him a PM for getting this ROM. My Kitchen is waiting for it....
:wink:
Stefan
:twisted: :twisted: Yeahhh gr8 I hope this one would be perfect I want to try it
news?
any news,
wmodem, build number ...
i´m ready to give it a try
joking ?
is topic joking ? o never heard before about 4.01.12 rom best regard
i WAS starting to think that this guy is telling the truth but no sign so far... damn, all that excitement for nothing
::adit
unfortunately
after one day of hopes that´s it.
at least someone with inside o2 info can confirm/infirm the existence of an O2 WM2003 either in beta fase?
Official O2 PPC 2003 4.01.12 ENG ROM
Official O2 PPC 2003 4.01.12 ENG ROM
The file as promised.
The programs on it are: -
Games
Jawbreaker
Solitare
Programs
Calculator
ClearVue PDF
ClearVue PPT
File Explorer
Microsoft Reader
MSN Messenger
Photo Contacts
Pictures
Pocket Excel
Pocket MSN
Pocket Word
SD Backup
SIM Manager
SIM Tool Kit
Terminal Services Client
Wireless Modem
xmail from O2
Settings
The usual settings including
O2 Auto Configuration
Hope this is what your all after, let me know.
thanks for the file, sorry bout my doubt but it took so long.. so anyone tried this yet? does it work with asian XDA1? im still downloading it. it will take some time for me coz im using dial up thanks.
::adit
great !
it IS real :shock: thanks Martin
how on earth we only found out right now ?
any insiders ? is it gonna be official or it's an old tryout from O2 ?
It HAS wmodem but I connect through Irda (i have no serial on my notebook).
Can someone try and confirm that it works on Irda on Windows XP
Steps for using wmodem:
1. install ircomm2k from http://www.ircomm2k.de/english
2. add a new modem (manual selection Standard 32600 bps) on the new com installed by ircomm2k
3. add to AT commands AT+CGDCONT=1,"IP","apn","",0,0
4. create a new DUN with the number at *99#
5. use if there is any username/password
Mine works fine but I cannot connect. It does communicate and ends on "verifying password" step.
Any help ?
thats great!! thanks very much martin,what about the auto config? does it show any asian provider? such as thailand AIS, DTAC or indonesian indosat, telkomsel, etc? thanks in advance...
adit said:
does it show any asian provider? such as thailand AIS, DTAC or indonesian indosat, telkomsel, etc?
Click to expand...
Click to collapse
Shure not....
Would you as provider support other ones?
Incluuded in Auto Conig should be:
O2-UK
O2-IRL
O2-DE
O2-DE Loop
O2-NL
???Manx???
and again Thx to Martin for sharing and uploading....
HTH
Stefan
breaking news )
Ok everybody.
Install this ROM ... then ... click on SIM Manager
THEN .... surprise ... it will install IA Caller ID (customized picture of the calling person)
This is indeed a surprize.
Thanks O2
Re: breaking news )
decebal said:
Install this ROM ... then ... click on SIM Manager
THEN .... surprise ... it will install IA Caller ID (customized picture of the calling person)
Click to expand...
Click to collapse
Normally this should happen Automaticly, since the CallerID.CAB fiel is int eh startup directory....
But it's a nice trick to get it working...
[edit]
Soory, forgotten to mention, that this ROM is now available in the Kitchen. I also tried to get the Autoconfigration working. Cooking went fine, but i didn't have the possibility to test it.
So fell free and test this ROM with Autoconfiguration......
Check http://lumpistefan.dyndns.org
[/edit]
Stefan
great !!!!
i test it in this afternoon it have a bug in this rom .... may be A30.09 much more better thx for kindly
martinbickley
ps. i check in rom update O2. it have 3.17.03 only where is 4.01.12 come from ? ....
Whats wrong?
Hi, i just installed the ROM and now it works perfectly well, caller ID installs automatically at the startup when the welcome screen appear after the upgrade? XDAMAN, what was the problem? i am using DTAC provider (okay, theres no autoconfig so i had to set up everything manually) everything works perfectly well? i feel its a lot more faster than other ROMs i tried (Siemens ROM, T-Mobile, betas, etc) the best ROM i've ever used!thanks again martin
::adit
too slow and unstable for me
hello adit ,, i live in bangkok too <<< may be we can met and talk about xda ( i have a lot of program for u ...free hehehe )
i decide to cook this rom from stefan kitchen ... and it's no have bug anymore ... Great . i garantee it.
but i didn't check battery lifetime .. who can tell me . is 4.01.12 better than other rom .. ?
ps adit please u email to me at [email protected] ? may be i have a new xda user friend... : )
I'm really in love in this forum :lol: Thanks to Martin for uploading this new Rom and to Stefan for the hard work on his Rom Kitchen.
Good morning
I have a QTEK2020 ,with ROM 1.66.00WWE. I use on it a BTGPS receiver but I have the following problem. The moment my position is locked, the QTEK phone ability is disabled,as the GPRS connection also. I can't receive or make any calls. When I close my BTGPS connection,the phone still doesn't work and I have to do a soft reset.
What might the problem be?
Thank you in advance
Nikos
I would advice to upgrade to a 1.72 ROM version.
Most recent are the O2 based 1.72.18x & T-Mobile based 1.72.190
roms.
I use my own cooked (also published here) 1.72.903 ROM which is based on the T-Mobile 1.72.190 ROM plus 'some' extras.
This rom works flawlessly with Bluetooth GPS's
Thx,is there a link to the 1.72 ROM ? Which will fit better on QTEK2020?
Next time: PLZ use search.
I can personally recommend the 1.72.903 rom, but then: I am the creator of it.
You can find that rom via http://forum.xda-developers.com/viewtopic.php?p=69940#69940
DO READ the instructions because you dont have a T-Mobile device.
If you, after flashing, dont like the pinkish T-Mobile Themes (and who does . . .), you can easily change back to the default theme (via settings/today) and reset the WM2003 dialer skin via a cab in the extended rom.
I brought german Xda neo (Rom : 2.15.13.27 WWE). It hangs on incoming call. I see the notification screen with incoming number. But cannot accept or reject call and the phone hangs. I have to do hard reset everytime. Is there any solution ??
Is the rom correct or is there any update. Pleaseeee help.
Sameer
Hyderabad, India
look for radio rom version problems ..
Well, most easy thing to do to check whether it's the rom or not is to update to the latest qtek rom or something. If it also does it on that rom then you know it's the phone.
On the other hand, are you running any other programs that interfere with incoming calls etc? Best way to test it is with a clean install obviously.
Haven't heared this problem before, so it might just be your phone.
If your overclocking with the 2.20.7.34 ROM then you might have this problem, it took me sometime to track it down to that - Hell this baby does just fine at 195MHZ!!! Take the last posters advice and try on a 'clean' install and you shouldn't have any problems.
Is that 2.15.4.47 GER a german ROM ? i am using english version and need english rom. Well, for time being my problem is sloved. I changed my rington to simple one, removed some applications(calculator).
Need imate jam PM10A (ROM VERSION- 1.12.00 WWE) rom upgrade .
welcome...
It should be on the FTP... Be careful though - i damaged my magician with that rom, though i was flashing off of Vista and that was over a year ago... Also, apparently, 1.12 is only for SOME magicians, cant remember which, but don't quote me on that
why not go for 1.13?
Thank you iceblade911.Where can i get 1.13 ,please post the link.
imate jam prob.
hi friends,
i hve got an imate jam. i was trying to upgrade my ppc rom and download the latest one rom update from the clubimate.com. i have windows vista and when i was updating it so in the middle it gave me that a connection error. although the mobile was correctly connected to the pc via usb. when i saw the screen of my mobile so there was USB written and nothing else. so now when ever i restart my ppc by removing its back so it resets and i cant do any thing to bring it to its original position.
i dont want any upgrade but i want my ppc back. as normal.
can any one pleaseeeeeeeeeeeeee help me
i wud be very very very thankful.
my email address is.
[email protected]
update problem answer
just do it again that iamte jam rom update to 1.12..............got to imate.com and download jam_update1.12
Not to worry mate.
Hi Zabih,
Not to worry. I have not personally tested with Windows Vista so, if you can use Windows XP, it would be great.
There is a special button sequence to bring the I-Mate to a Factory install mode. Then you will be able to flash the ROM again.
I can't find the sequence at the moment, but drop me an e-mail and I will surely come back to you.
[email protected]
hello sir qaseemax
i do have the same problem when i tried to upgrade my imate jam and i am using an xp.... can you help me pls,,,
hope to hear from you soon
thanks a lot.... here is my email... [email protected]
In 2014!
Hey,
Is anyone still using their JAM? It's a lovely device and mine is still working. I was looking for some ROM upgrades. Directions, anyone?
Thanks!