Related
Did any one had similar problem,after cooking ROM From Lumpi Stefan's Kitchen for WM2003.I have tried T-Mobile and also O2 4.01.12Eng.Both after upgrading makes device to Reset,after going off automatically.When Power button is switched on It makes softrest.
In other words i has already resoft and phone is off .Missing all calls.
Can any one help me.
Is this coz of any software from ROM kitchen?
Thanks
mushtash said:
Did any one had similar problem,after cooking ROM From Lumpi Stefan's Kitchen for WM2003.I have tried T-Mobile and also O2 4.01.12Eng.Both after upgrading makes device to Reset,after going off automatically.When Power button is switched on It makes softrest.
In other words i has already resoft and phone is off .Missing all calls.
Can any one help me.
Is this coz of any software from ROM kitchen?
Thanks
Click to expand...
Click to collapse
it might help if you gave us a list of what software you included in the ROM and which ROM you currently have.
I 1st tried T-mobile 4.01.00 and also 4.01.16 with softwares:
pocket Nav
Spb Pocket plus
and some themes and Games thats all
I burnt the T-Mobile Rom onto my XDA and it totally hosed it. It wouldn't run the radio stack, it wouldn't communicate through the cradle, it was soft resetting, oh - what a mess.
I luckily had backed up the previous ROM to SD card so was able to restore back to a working condition [phew].
I'll never go down the T-Mobile route again !
I had an issue with Pocket Plus from the kitchen. It messed up ActiveSyncs use of the serial port.
So I cooked another ROM without Pocket Plus - give it a try.
we have a problem with a whole bunch of orange m1000 s that hard reset themselves every few days - I have a feeling its in the extended rom so am looking for an orange customer - pref uk who can post there extended rom here
or here----->>> http://forum.xda-developers.com/viewtopic.php?p=93851#93851
Charlie its not the software, its a problem with the main rom code, we have the same problem with some of the units at work, contacted orange and they say it was fixed in a later version of the rom. will post it when i get it.
Which ROM version are you using?
I am currently using 2.02t that has been customised for Orange UK and it is working perfectly, no resets or anything. If you want to stay with official ROMs, then the latest Orange UK version is either 1.66.200 (non MMS) or 1.66.230 (with MMS). They are both available on the Orange website.
Fin
If you say so
as I say I have had a replacement unit and all is ok - but I can tell you that I upgraded my main rom and radio rom and fault still occured - the only thing not changed in software was extended rom - you take from that what you will - I'll leave it alone and enjoy my working unit
It looks like you can't access ROM's anymore on the Orange website.
Can someone post the roms here?
Re: If you say so
ChArLiE M said:
as I say I have had a replacement unit and all is ok - but I can tell you that I upgraded my main rom and radio rom and fault still occured - the only thing not changed in software was extended rom - you take from that what you will - I'll leave it alone and enjoy my working unit
Click to expand...
Click to collapse
Findus,
can you post your customised 2.02t roms here as I would like to do a comparison of the roms for both wm2003 and wm2003SE.
I have currently loaded on my M1000
Op ver 3.66.1.200
ROM 1.66.00WWE
ROM Date 02/20/04
Radio Version 1.10.00
Protocol Version 1337.18
ExtROM 1.66.200
Like I say in another post you can't get roms from the Orange WEB or Customer services
hi, i use the Windows 2003 SE as my ROM, i've been using it for more than 4 months, but now i facing the problem, my phone (O2 XDA) is not stable, sometimes it takes times to make a call, and some call cannot be picked. and the sms most of the time delayed (once i restart my phone, all the sms coming) so is there any solution for my problem? of is there any way to revert back the ROM to the original ROM (that is from the O2)?
Best Regards,
Freddy
Just download the ROM and flash your Wallaby.
Where is the problem?
Stefan
Where i can get the original ROM ?
o2's site is a good bet i guess
or maybe LumpiStefan's kichen have the rom version your device came
with if you then just dont add any extre stuff it would be the same as the device was when you got it
Check this site:
http://wiki.xda-developers.com/index.php?pagename=ROMVersions
Stefan
awsome ~! hehe,.... Thanks a lot dude ~!
Hello,
I own original Artemis P3300 from HTC with locked CID, so I'm not able to install other ROM than original from HTC. Today I try to intsall "PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap" ROM and I leave it. After aprox. 25 minutes I did soft reset and I was very surprised. Despite CID lock new ROM booted. New system is very nice and more more fast than original HTC ROM and has good software base against original HTC ROM. Is it possible over CID lock? Have someone similar experience? It works really and I don't understandt, but I'm very happy. No money lost and cool ROM is on
----------------------------------------------------------------------------------------------
Sorry about my English, I'm from Czech Republic.
Wow ... that is isteresting. I have also tried several ROMs, as I have Russian on my P3300 and want english, and above all my device is also CID locked.
You sure that yours was locked, cause if so I will also try then to flash this ROM, but few questions:
1. Safe to flash this ROM (as name implies it is for Dopod machines) on HTC Artmeis
2. Does this ROM support GPS.
3. How does it compare to WWE shipped ROM from Artemis
EazyVG said:
Wow ... that is isteresting. I have also tried several ROMs, as I have Russian on my P3300 and want english, and above all my device is also CID locked.
You sure that yours was locked, cause if so I will also try then to flash this ROM, but few questions:
1. Safe to flash this ROM (as name implies it is for Dopod machines) on HTC Artmeis
2. Does this ROM support GPS.
3. How does it compare to WWE shipped ROM from Artemis
Click to expand...
Click to collapse
Good evening,
yes my device is CID locked on 200%. When I try to install other ROM, for example "ARTE DOPODAU 1.25.707.02 026990 WWE SHIP" it ends same as before this "experiment" = "BAD VENDOR ID". This ROM from PDAMobiz probably has specific instalator, which go around CID lock. About your questions:
1) Safety I can not declared. It was only experiment, because I won't pay for unlock, it is same mess as Microsoft and his Windows. But I did this "experiment" today aprox. five times and each time was succesful.
2) Yes, this ROM has same equipment as original HTC ROMs and much more extra. GPS and Wi-Fi are full functional. Only one thing droped out. I didn't find MMS editor in outlook, only e-mail and SMS.
3) I use it only one day so far, so I can offer only short-time and subjective opinion. ROM from PDAMobiz is more agile than original ROMs - it's knowable a lot on first click. It is default in WM6 colors and it has extra software integrated. I like for example good system equaliser, opera browser, overclock software or acrobat reader instead of horrible clearvue.
EazyVG, if you try it please tell me if it worked. Thank you!
I also have a locked CID (can't upgrade from Dutch to English rom) and succesfully upgraded to this version. Mine took only 12 minutes probably 'cause I've overclocked it to 273Mhz and started the upgrade.
Rom
cosinusx said:
Hello,
I own original Artemis P3300 from HTC with locked CID, so I'm not able to install other ROM than original from HTC. Today I try to intsall "PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap" ROM and I leave it. After aprox. 25 minutes I did soft reset and I was very surprised. Despite CID lock new ROM booted. New system is very nice and more more fast than original HTC ROM and has good software base against original HTC ROM. Is it possible over CID lock? Have someone similar experience? It works really and I don't understandt, but I'm very happy. No money lost and cool ROM is on
----------------------------------------------------------------------------------------------
Sorry about my English, I'm from Czech Republic.
Click to expand...
Click to collapse
WHERE DID YOU GET THE ROM FROM
pdamobiz
I got this ROM on www.pdamobiz.com or on xda-developers FTP. Ther is three versions, Lite, Customized and Powermap. I try to install each, but only Lite and Powermap was succesfuly instaled. Customized ROM freeze on system booting, but activesync stay active, so you can install other ROM.
cosinusx said:
I got this ROM on www.pdamobiz.com or on xda-developers FTP. Ther is three versions, Lite, Customized and Powermap. I try to install each, but only Lite and Powermap was succesfuly instaled. Customized ROM freeze on system booting, but activesync stay active, so you can install other ROM.
Click to expand...
Click to collapse
DID YOU PERFORM ANYTHING SPECIAL IN YOUR UPGRADE PROCESS or DID YOU CARRY IT OUT AS NORMAL.
The powermap version is an .exe file. After connecting it with activesync i just doubleclick on it. Then after 'bout 12 minutes it told me to hard reset the device and then I got the powermap version.
My advance
I download pdamobiz ROM and unpack it by the winrar, after that I connected device to PC and established connection over activesync. Then i run "UpgradeRom_P800W.bat" and left it works.
cosinusx said:
I download pdamobiz ROM and unpack it by the winrar, after that I connected device to PC and established connection over activesync. Then i run "UpgradeRom_P800W.bat" and left it works.
Click to expand...
Click to collapse
OPPS - TRIED THIS - UNIT NOW STUCK IN RE-BOOT MODE...........HELP
pda23 - your caps lock key is stuck on
Recover
Press and hold voice record button and press reset. Bootloader will appear. Now you can plug USB cable and flash up original HTC ROM.
Can you let me know what are the new features in this rom compared to the old one?
I have the standard dutch T-mobile ROM
Is there someone from Holland that has installed this one? Did it solve some of the problems with being unreachable?
OK, today I decided to flash the Dopod PowerMap 1.1.2 ROM to my HTC Artemis which was supplied with Russian
Official ROM. The phone is CID locked as I was unable to flash any other ROM, but this one did.
I did it on Vista using new Windows Mobile Device Center. Once connected and partnership established, I launched
the .exe file (ROM) and waited for around 15-17 minutes until I saw "Flashed successfully .... do a Hard-Reset".
Waited for another 30 seconds and did hard-reset. Once the screen with option for formatting came up, waited
another 30 sec and pressed the green/call button.
What can I say about this, at last in English, ROM. I am very happy. Some things noticed in first few minutes of
use:
ROM version: 1.28.0.0 WWE [1.12.411.1 RUS]
ROM date: 11/06/06 [9/12/06]
Radio version: 02.67.90 [same as old one]
Protocol version: 4.1.13.28 [same as old]
OS: 5.1.342 (15096.3.0.1) [5.1.342 (15096.3.0.0)]
1. The bootloader screen remains the same!
2. AKU is now 3.01
3. I have around 38.5MB of free storage from 42.55 total (cooool)
4. Adobe Acrobat LE 2 is there instead of pathetic ClearVue PDF plus PowerPoint Mobile (didn't have it before)
5. HTC Apps - HTC Task Manager 1.0, HTC GIF Animation, HTC Audio Manager 1.0 (player), HTC Voice Recorder 1.0,
Media Hub (cool one and integrated with the rest supplied multimedia apps) .... all these were not there with RUS Rom
6. Applications included: GB-Soft Tweak (in settings menu), Opera, Audio Booster, GPS Viewer 1.5, GSFinder+, Jeyo SMS Backup 1.1, NoteM (Voice note recorder), OmapClock 0.2, PHM TrayLaunch, PowerMap G10 (without map), BurnOak Radio Scheduler 01.00.01, TRE 0.90 (registry editor), Voice Speed Dial (Cyberon 1.1 b.507271), vxUtility 1.6.2, WM5torage 1.73
7. Input Methods - Keyboard, Block Recognizer, Letter Recognizer, Transcriber (English Only)
8. Color scheme is of that Crossbow
It is amazing that with all these apps there I have ~38MB free storage memory as I prefer to have critical apps installed in main memery, plus my 1GB for the rest.
The next thing would be to unlock ext_rom and take out what I don't need, like PowerMap G10 and few other apps, to have extra few MBs (if possible).
Compared to my previous shipped ROM this one also feels snappier and cooler. I think I am gonna stick with this
one and wait now for ROM which features higher AKU version, with flashing option without CID unlocking. Running
Crossbow is still what I am dreaming off on this device.
As of now cannot say anything about SD card problem, but WiFi and GPS are working nicely.
IPL, SPL and Radio versions have remained same for me with the old Bootloader screen ---- think it is cause bootloader is locked .... any clues on this issue? Or should I try flashing again but this time with bootloader screen only loaded!
Where to download?
Any other download sites for the 1.1.2 PowerMap rom because the PDAMobiz site is painfully slow?
It is here on xda-dev @
ftp://xda:[email protected]/Arte....2_PowerMap.exe
Or get from here (rar files):
http://4pda.ru/forum/index.php?showtopic=28500&st=60&#entry589462
Hello,
I have a DUTCH MDA III compact AKA P3300.
IPL 1.13.0001
SPL 1.13.0000
GSM 024990
OS 1.13.0000
It is SIM locked, can I update using this ROM? Next question, what will I gain, and what will I lose?
Hello
I have the xda Orbit, can I use the PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe
without Problems? What does the excactly the ROM will do with the Phone?
Is my Germany WM5 still on it?
Hi!
I`m new to this scene and quite a newb. I bought my MDA Pro (as far as i know, it`s equal to the Universal) yesterday from a friend and i`ve already unlocked it.
Now i`ve stumbled across this great forum. There are many ROMS on this page, and, to tell the truth, i don`t have a clue about the whole stuff...
Could anyone be so kind and tell me, which ROM is the "best"? I would like to use a stable ROM, that`s properly working with Bluetooth (because of my GPS Mouse and BT Headset) and, of course, WLAN. And it should work a bit faster than the original ROM, if possible.
And... what`s the difference between the Mobile Windows 5 and 6? I´ve read something about issues on the Bluetooth functionality?
Edit: Currently i have the Radio 0.0.0 Rom (or something in that way) on my Universal. Do i have to update that Radio ROM thing too?
Thanks a lot for the answers
Chris
Ok... Now i`ve tried two different FWs on my universal.
the Qtek Firmware and a FW that`s called Jasjar after i read about its benefits...
Both ROMs won`t work with my Provider... I can find some Providers like A1, T-Mobile and ONE but 3 (Hutchinson 3G or something like that) won`t show up...
Does anyone know this problem? Or can you tell me, which Custom ROM is the "best"?
To be honest, I've tried them all, and at this point I am tired of changing. You only have 2 choices anyway, so here are my experiences:
1st: IF you are looking for an Official WM5 ROM that supports AKU2 and A2DP, stick to this 2 only, because they are the most stable and fully functional, even VIDEO CALLS:
1) QTEK ROM 1.30.77
2) TMobile NL ROM 1.30.115
2nd: IF you are looking for Cooked WM6 ROMs (ALL WITH NONFUNCTIONAL VIDEO CALLS), there are alot of them, but here are the important ones to always try:
1) Dark Force ROM
2) JWright's ROM
3) PDAViet's Modification of Dark Force ROM
4) Helmi's ROM (either his release or through the kitchen)
5) Laurentius26 ROM, cooked from Helmi's kitchen.
6) Grayme's ROM, cooked from Helmi's kitchen.
Personally, I am using the TMobile ROM. I am tired of trying ROMs. I have not enjoyed my Universal for months, because I keep looking for the perfect ROM. Guess what? It all depends on what you prefer.
As for the WM6 ROMs. I prefer PDAViet's Modified Dark Force ROM or any Dark Force ROM. Why? It lacks the FREEZE bug after a soft reset. JWright was able to address the issue, but his ROM do sometimes hang after a soft reset. But, as I said, it all depends on what you prefer.
cktlcmd said:
To be honest, I've tried them all, and at this point I am tired of changing. You only have 2 choices anyway, so here are my experiences:
1st: IF you are looking for an Official WM5 ROM that supports AKU2 and A2DP, stick to this 2 only, because they are the most stable and fully functional, even VIDEO CALLS:
1) QTEK ROM 1.30.77
2) TMobile NL ROM 1.30.115
2nd: IF you are looking for Cooked WM6 ROMs (ALL WITH NONFUNCTIONAL VIDEO CALLS), there are alot of them, but here are the important ones to always try:
1) Dark Force ROM
2) JWright's ROM
3) PDAViet's Modification of Dark Force ROM
4) Helmi's ROM (either his release or through the kitchen)
5) Laurentius26 ROM, cooked from Helmi's kitchen.
6) Grayme's ROM, cooked from Helmi's kitchen.
Personally, I am using the TMobile ROM. I am tired of trying ROMs. I have not enjoyed my Universal for months, because I keep looking for the perfect ROM. Guess what? It all depends on what you prefer.
As for the WM6 ROMs. I prefer PDAViet's Modified Dark Force ROM or any Dark Force ROM. Why? It lacks the FREEZE bug after a soft reset. JWright was able to address the issue, but his ROM do sometimes hang after a soft reset. But, as I said, it all depends on what you prefer.
Click to expand...
Click to collapse
Considering above factors I too agree that for months I am not very happy with wm6 since it got out. Loads of problems, and not a single one is perfect.
So I guess I am gonna downgrade to WM5.
Since I have a Imate Jasjar it would be AKU3.3 of Jwright which was steady or if you could suggest which one.
at least I will be able to use my mac with missing sync and video call is there too.
aniel1 said:
Considering above factors I too agree that for months I am not very happy with wm6 since it got out. Loads of problems, and not a single one is perfect.
So I guess I am gonna downgrade to WM5.
Since I have a Imate Jasjar it would be AKU3.3 of Jwright which was steady or if you could suggest which one.
at least I will be able to use my mac with missing sync and video call is there too.
Click to expand...
Click to collapse
If you are looking for a stable JWright ROM with VIDEO CALL functions. Look for JWright's AKU 3.2 ROM. It has 31MB free Main Memory after soft reset, but the problem is: IT IS NOT GOOD IN MEMORY HANDLING after you install apps. I could not pinpoint a specific app, because I tried installing different apps after a hard reset, and I always ended up with a memory leak. You can try, you might be lucky and not have the memory leak.
Jwright did not release a WM5 AKU3.3 only AKU3.2.....Look at the very end of his thread, I posted a link for all to download.
=======
cktlcmd said:
If you are looking for a stable JWright ROM with VIDEO CALL functions. Look for JWright's AKU 3.2 ROM. It has 31MB free Main Memory after soft reset, but the problem is: IT IS NOT GOOD IN MEMORY HANDLING after you install apps. I could not pinpoint a specific app, because I tried installing different apps after a hard reset, and I always ended up with a memory leak. You can try, you might be lucky and not have the memory leak.
Jwright did not release a WM5 AKU3.3 only AKU3.2.....Look at the very end of his thread, I posted a link for all to download.
=======
Click to expand...
Click to collapse
Thanks. Which was the best aku3.3 and idea.Do you have a link to Helmi's 3.3 or 3.5 Aku. I will surely go to the end of the thread you indicated.
aniel1 said:
Thanks. Which was the best aku3.3 and idea.Do you have a link to Helmi's 3.3 or 3.5 Aku. I will surely go to the end of the thread you indicated.
Click to expand...
Click to collapse
Sorry, I have no link for Helmi's 3.3 nor 3.5. I believe I preferred Helmi's 3.3 than 3.5 better. I could not remember as that was about 6 months ago already. I am definitely sure I did not like his 3.5 release though.
Thanks for the answers!
@aniel1: Here`s the Link for Helmis 3.5.
http://rapidshare.com/files/6981008/Helmi_UNI_AKU3.5_v1.3.rar
@cktlcmd: I guess the JWright ROM wouldn`t be the best choice for me. If it`s true, what you say about the memoryhandling. I want to use TOMTOM with the Universal, so i can finally get rid of my old PDA.
Oh, and you recommend the danish T-Mobile ROM.. Which language is used for this rom? Could be a problem since I only speak english and german I`ve already tried the austrian (original) T-Mobile ROM (Yes, I´m from Austria ^^) which hasn`t worked with my Provider too. But the Colors of this ROM are disgusting and the ROM is only AKU 2.0. (It`s working well, but the speed is quite moderate without any tweaks)
It`s sad, that you are discontent with your Universal. All in all it looks quite formidable to me. If there wasn`t the problem with my Provider. I`ve called the hotline today, and they told me, that it may have something to do with the UMTS functionality of my SIMCard. Tommorow I`ll go to the ProviderShop and change the SIMCard. I hope this will work.
P.S.: Could you tell me the difference between the RadioRoms? There are so many of them. Are they country related or are they all (essentialy) the same?
talantyyr said:
Thanks for the answers!
@aniel1: Here`s the Link for Helmis 3.5.
http://rapidshare.com/files/6981008/Helmi_UNI_AKU3.5_v1.3.rar
@cktlcmd: I guess the JWright ROM wouldn`t be the best choice for me. If it`s true, what you say about the memoryhandling. I want to use TOMTOM with the Universal, so i can finally get rid of my old PDA.
Oh, and you recommend the danish T-Mobile ROM.. Which language is used for this rom? Could be a problem since I only speak english and german I`ve already tried the austrian (original) T-Mobile ROM (Yes, I´m from Austria ^^) which hasn`t worked with my Provider too. But the Colors of this ROM are disgusting and the ROM is only AKU 2.0. (It`s working well, but the speed is quite moderate without any tweaks)
It`s sad, that you are discontent with your Universal. All in all it looks quite formidable to me. If there wasn`t the problem with my Provider. I`ve called the hotline today, and they told me, that it may have something to do with the UMTS functionality of my SIMCard. Tommorow I`ll go to the ProviderShop and change the SIMCard. I hope this will work.
P.S.: Could you tell me the difference between the RadioRoms? There are so many of them. Are they country related or are they all (essentialy) the same?
Click to expand...
Click to collapse
thanks for the link. do you by chance also have link to helmi 3.3? just want to use the most steady one.
talantyyr said:
I`m new to this scene and quite a newb.
Click to expand...
Click to collapse
Better stick to the original release.
Last week I was newb and this week I learnt the above lesson.