Hi, I have PZP v4.5 running on my Qtek 2020i, however when i switch to Car profile, with the headset and bluetooth set to on it doesnt automatically switch on bluetooth, i have tried soft reset, and still when i switch from a profile to Car profile it doesnt activate bluetooth, i have to turn it on manually. Is one of the new versions fix this, or can 4.5 be fixed. If anyone knows of a fix, it would be much appreciated.
The current version is 5.3, if you bought this software, I suggest you upgrade it.
I am running 5.3 on mine with no problems.
http://zendrui.free.fr/download.htm
Related
Hi all, I bought a Qtek S100 and tried to connect it with my BT GPS receiver (Falcom Navi 1). It didn't work properly and I suddely lost te BT icon on the lower right hand side of the S100. It hasn't re-appeared even after several soft resets?
Does the S100 have the sae BT problems with GPS as the xdaII had?
I use BT GPS and the only problem so far is that I have to re-pair them sometimes.
Try Start->Settings->Connections->Bluetooth to get to the same screen as you would get to by clicking the BT icon.
THanks for the reply. Which BT GPS do you use? and with what Navigation program?
Holux GR-231 and TomTom3.
I am having problem with Bluetooth GPS as well. I have 2, one is iTrek Bluetooth GPS and one is ArcoreTech Bluetooth GPS.
Since I have tried both GPS units, I am pretty sure it's i-Mate JAM's Bluetooth problem.
Instead of upgrading my ROM to 1.06.00 WWE, I should have tried it out with version 1.03 first. I upgraded from 1.03 to 1.06 as soon as my JAM finished charging. BIG MISTAKE!
I ended up usiing "Pocket Bluetooth Tool" to designate COM8 (for example) for my GPS. However, if I happen to soft reset or turn of Bluetooth, I would have to pair it again.
I read many article's on the internet and the problem seems to point to the MS Bluetooth stack (instead of Widcomm used in my i-Mate PDA2K - and by the way PDA2K works perfectly with my GPS units).
Hopefuly i-Mate will address this problem during the next ROM update.
So how come Loboman's holux works ok?
Loboman are you using a different BT stack?
I would like to guess that he uses ROM version 1.03...
Jazzedout said:
So how come Loboman's holux works ok?
Loboman are you using a different BT stack?
Click to expand...
Click to collapse
I use 1.06.00. All i do is that I tap on the BT icon, choose 'Devices', tap 'New...' and waits until the phone finds the GPS. Then I add it and pair it with the passkey. Then I had to scan all serial ports using a program that Holux supplies (I bet it works with any BT reciever though) to find out that my port was COM5 and finally I set my programs to use COM5. As I previously stated, I do have to re-pair them sometimes for some reason, but I can live with that.
I previously had an Acore unit which worked ok with my iPAQ 5450 (also MS BT stack) in WM2003. It took me all the way from northern Sweden to Barcelona in Spain last summer
I have not used Pocket Bluetooth Tool, but I have read about it. I think that it works without it so far. I also leave my BT on 24/7 since I don't think that it uses too much battery.
I hope things work out for you.
Absolutley no problems with Rom 1.01.01 Ger and Navilock BT-308 GPS-Mouse
I am not sure if the following has anything to do with Bluetooth but at least it cured my Bluetooth vs. GPS problem, for now.
On Club i-Mate's ROM update page, I found out that if the radio version is 1.10, then I am NOT suppose to apply the camera patch. After I uninstalled it, my JAM seems to work better with Bluetooth GPS units. My biggest problems were:
1. Once I soft reset my JAM, I have to re-pair my GPS units.
2. PrymeNav software took a long time to scan for GPS - and crashes sometimes when I designate already-scanned port.
3. Unable to hold two paired GPS units in Bluetooth Device List (though only used on at a time).
I have played with it after I uninstalled the camera patch and to this morning my GPS units still function well. Another key is to turn on the GPS unit and make sure it is linked (as indicated by its LED) - then turn on the GPS software. That way the hardwares are ensured to be linked.
As a side bonus, now I can perform Bluetooth Activesync on my Mac (via PocketMac software). However, I still require Pocket Bluetooth Tool installed on my JAM.
Weird!
Hello everybody. I have a problem with bluetooth on my S200. I can not discover other devices nore can my device be discovered by others. It seems BT is switched off but in the settings I have everything switched on but it still doesn't work. Can somebody tell me how the registry should look like as a standard with bluetooth switched on and device set to discoverable? Perhaps something has been changed by installing some programs.
Willem
I got my S200 back from a repair and it was also upgraded form G3 to G4.
Everything seems to work fine, except my Jabra BT500 head set. After pairing with my S200 I got a very cracking sound.
So I checked my Jabra with another mobile phone and it worked very well. I checked another head set with my S200 and again a cracking sound.
Does anybody knows how to solve this or do I have to return my S200 again for repair?
Hi, I have excatly the same problem, it also occurs with the bluetoothof my car...anyone can help us?
I have returned my S200 to QTEK today in order to have it repaired (again).
I have tested it (in my car) with 2 other Bluetooth headsets and there was no problem. There was also no problem when I tested my own headset on another phone. So this proves that my S200 has some kind of defect.
The sound is very crappy ?
Or is the soud quite ok, but experiencing high frequency glitches, kind of metallic parasits?
Because in that case, there is nothing to do, It's due to the MS bleutooth stack which has a very poor encoding librairy... and since there is no widcomm stack for S200 (and some other qtek too, a lot of people is yet trying to malke it work), then evey bleutooth headset will have bad sound in A2DP with the S200 :'(
One of the main reasons why I want to change for a widcomm stacked pocketPC (shame on MS!!!!!!!!!!)
For me, the quality is very bad. At the beginig I use it only on my car and it was working perfectly, since I try to connect to the bluetooth headset or to my computer the sounds became very very crappy. I have Dopo ROM, which rom do you have? what ROM do you advise? Thank you
I have tried the LVSW, Jester and shipped ROMS and all these ROMS have the same problem. So I think that it is not related to the ROM but due to bad hardware components.
it's strange because it was working for me before I use other bluetooth device. I will try to upgrade the rom to the official QTEK ROM
I have the same problem. As if the bluetooth signal were cut per moment.
it's not linked to roms, but to bluetooth stack, so since the bt stack is updated (but I doubt it), changing roms won't help
I could fix it, I update the ROM, delete all pairaing on my cars... I change the "hsotname" of my QTEK on "settings - Owner information" I recreate the pair and it works fine on my car, now crappy sound anymore. Just to test it again, I try to pair my "fujitsu laptop" to my qtek, since I did it, the sound is again very crappy. So I will flash again and pair it only with my car. If I return it to Qtek it takes 1 months... If someone can fix this that would be great.
I'm hoping someone is having the same experiences or can help recommend a solution.
I have trinity (Obviosuly) with the latest WM6 rom from the Manufacturer, with Radio 1.50.
I use a TomTom One v2 (with bluetooth), and a Parrot 3200ls.
The TomTom has the latest firmware, as does the Parrot.
When trying to get traffic updates to the tomtom thorugh my trinity, the connction works the first time, but switch off both the tomtom and the trinity, the connection never works again and has to be re-setup.
The Parrot will connect to the phone, but sometimes will not connect at all until i reset the trinity, when it does connect sometimes the sound and mic wont be routed to the car kit and you have top physically pick up the phone , not a good idea in communist Great Britain when your driving!
Ive tried different ROMS, I even tried downgrading my radio to 1.45 with no success.
The trinity is a great device but not being able to use the bluetooth car kit safely, and the tomtom plus services, is seriously making me consider going back to my SE k610, which I really dont want to do but I know works flawlessly.
Thanks in advance.
Craig f said:
I'm hoping someone is having the same experiences or can help recommend a solution.
I have trinity (Obviosuly) with the latest WM6 rom from the Manufacturer, with Radio 1.50.
I use a TomTom One v2 (with bluetooth), and a Parrot 3200ls.
The TomTom has the latest firmware, as does the Parrot.
When trying to get traffic updates to the tomtom thorugh my trinity, the connction works the first time, but switch off both the tomtom and the trinity, the connection never works again and has to be re-setup.
The Parrot will connect to the phone, but sometimes will not connect at all until i reset the trinity, when it does connect sometimes the sound and mic wont be routed to the car kit and you have top physically pick up the phone , not a good idea in communist Great Britain when your driving!
Ive tried different ROMS, I even tried downgrading my radio to 1.45 with no success.
The trinity is a great device but not being able to use the bluetooth car kit safely, and the tomtom plus services, is seriously making me consider going back to my SE k610, which I really dont want to do but I know works flawlessly.
Thanks in advance.
Click to expand...
Click to collapse
Hi there,
I havebeen struggling with issues on my P3600i (trinity) and Parrot 3200 LS. It seems parrot have issues with WM6. The problems I was facing was reset of parrot during call, random divert of calls through handset, I answr sometimes and have to turn off handsfree on the call menu on my phone so I can hear the caller through my handset.
Today I downloaded the latest software for the parrot and uploaded it to the car kit via bluetooth on my laptop. There is a new feature in the paired devices list of "Forced Connection". I used that and low and behold my issues apparently have stopped. I noticed that my phone book isnt synchronising but the fact that I can actually use the car kit is fantastic!!!! I have been dealing with these issues for over 7 months!
Update to the latest version and see if this fixes it.!.!.!
Hi everyone
My Wizard has a strange problem with bluetooth: I pair the devices (in my case, the GPS and the headset), and they work fine. I leave the car, turn off both devices to save battery.
When i'm back in the car, i turn on both the devices and none work with the wizard. I have to pair them again.
Anyone with this problem, or anyone who knows the solution?
Thanks
PS- My wizard has the CR86 1.2 Rom (but before this rom, this problem ocurred).