Hi everyone
My Wizard has a strange problem with bluetooth: I pair the devices (in my case, the GPS and the headset), and they work fine. I leave the car, turn off both devices to save battery.
When i'm back in the car, i turn on both the devices and none work with the wizard. I have to pair them again.
Anyone with this problem, or anyone who knows the solution?
Thanks
PS- My wizard has the CR86 1.2 Rom (but before this rom, this problem ocurred).
Related
I've just got a Orange SPV M3100 and paired it with my BMW OEM bluetooth carkit, all goes fine and paired no problems.
It manages to connect to the phone and display contact details on the radio display and make calls.
But leaving it a couple of hours and coming back, the phone will not reconnect back to the car. I've tried resetting the phone without success.
The only way to get the connection back is to re-pair the devices.
I had a Imate Jamin before and it worked without a problem, connects every time.
Is anyone else experiencing problems with their carkits?
Do you think the problem is specific to the Orange ROM, would flashing it to a Imate or TyTN ROM help or resolve the problem?
Any advice would be greatly appricated.
Hi, I got a problem similar like yours...
I´m from Spain and I have an ´06 Opel Astra(Vauxhall in UK) with the BT handsfree carkit from factory.
If I make a hard reset to my Vodafone S200 (Orange SPV M600) and leave the machine with the factory settings it works fine with the carkit, but it recognice the carkit like a headset handsfree. But if i restore a back up with the TomTom 6 installed... wow, then start the problems... the handsfree conect with the S200 but after a few seconds the connection is over...
I don´t know if have you got some kind of navigation system, but in my case the problems starts when I install the TomTom... I´m sure it changes some drivers of the BT and this makes the don´t works propertly.
I don´t know what to do...
PArrot Car Kit
I have the same problem with Parrot Car Kit and I have the latest TYTYN ROM
2006 BMW 3-Series Bluetooth
My car doesn't have bluetooth, but I had a loaner car while my car was under the knife. The loaner car was a 2006 3-series w/ Bluetooth. The first pair was perfect, but after a few hours.. What a POS.
I have the latest ROM on my phone, and that didn't make a difference.
No issues on my 5 series, but I have one of the first ULF modules in mine.
From reading TyTN Bluetooth issues around the net and on this forum, it seems to be an issue with the TyTN having some kind of power save mode which turns the bluetooth off after some time.
Kinda stupid, anyone know some registry crack to turn any power saving off?
I have a Parrot CK3100 in a BMW and a brand new SPV M3100. All was working well with my M600 but as soon as I swapped the phone for the M3100 last week I've had problems as described by the OP. Bluetooth keeps switching itself off on the SPV. It works well enough to start with and then suddenly it disconnects. Re-pairing works and it's worth going to bluetooth settings and turning it back on again before you try re-pairing.
Surely there must be an easy fix for this problem - I'm just really pleased I'm not the only one with this fault.
............
Your all quite lucky it works at all..mine doesn't do anything
My Ford Fiesta has been waiting for an 'software upgrade' since October !!
Promised it would be available before Xmas but nothing happened.
lifterus said:
Try and replicate the problem with a different phone if possible. One that BMW supports. If can replicate it, then they'll update the firmware on the BT unit in the car. This happened to me. But I had to prove my case using my girlfriend's RAZR before they'd listen and stop blaming my phone as the cause.
Click to expand...
Click to collapse
I dont think it is a problem with the BMW carkit as it worked fine with my SPV M600 (Prophet)
I'm just going crazy with this problem:
I installed TT6 on the I-mate Jamin, connected to the BT GPS Holux GPSlim236 and it was working. After some hours or days, when I launch TT6, it does not recognize the BT GPS, it displays " no GPS (flight mode)" also if BT is active on the pda.
I tried also to update the firmware to the LvsW AKU 2.3.1 that should be very stable but the problem arised again. If I install again TT& it works again for some hour only.
Anothe strange behaviour is that TT6 is not trying to activate automatically the BT when launched, while after the installation it was.
Any solution?
Thanks in advance
did you disabled the phone?
when the phone is off, even if bluetooth is on, tomtom can not communicate with any bluetooth gps.
a new hope...
Maybe yes, I disabled the phone, as I was doing in my previous iPaq WM2003. I will follow your indication and give feedback asap. The strange thing is that other GPS programs are working with the BT GPS even if the phone is disabled.
Thank you! I could solved it!
Thank you, adl67-san, zadigre-san.
I had same problem with my QTEK9000 & TomTom6.
The problem was TomTom6 can not find GPS receiver(Holux GPSlim240).
But after Phone function is ON, it works well.
(Normally, I use my QTEK9000 without SIM.)
This problem has bother me for 1 month.
Now I can use it.
Thanks a lot again.
Sincerely yours,
Hi all,
Just upgraded myself from a Wizard to a Hermes and am mostly happy, I used the crack program to unlock it from T Mobile and upgraded it to WM 6.0.
Mostly it is great, I just have two problems at the moment,
1. I am able to pair any bluetooth device, but when I try and talk with my BT headset ( WEP200) all I get is white noise, it worked fine with the Wizard.
2. I have paired my GPS unit ( also worked OK before) but I do not know how to make it recognizable by the software ( i-go) I have tried using the 'External GPS' feature but nothing, any help would be great.
THanks
same problem for
i try with 2 different bt headset
any idea to fix?
Hi there, 2 questions:
1) The built-in GPS receiver turns OFF when switching the device standby - that's really bad for me because I like to log my GPS track when I go hiking. Is there any setting (registry? hack?) to tell GPS NOT to turn off?
2) I thought of a "workaround" to use my old Holux GPS bluetooth mouse. Pairing works, but after switching the device in standy mode, it TURNS ITSELF ON AGAIN!!! (after 3 seconds) - so battery is again burned. Is there any setting to tell the device NOT to turn itself on? It seems to be the case with any kind of incoming bluetooth connection, the screen goes on. That's really bad for me...
So anyone can help? Is it a generic WM 6.0 annoyance or an Ipaq 614 "special"?
Greetz B.
go to battery settings and let the device work with no time limt
then use this app
http://www.mobiletopsoft.com/board/1313/turn-your-pocket-pc-screen-off-with-awady-screenoff.html
(there are more freeware for this issue )
Hi!
I've installed a great ROM from babak00000, with Windows mobile 6.5, but i'm now having a bluetooth issue:
- i've got a GPS devide that i use. I've installed the device and user until yesterday without problems. But today I had a problem: my GPS software in Prophet did not recognize the gps device.
- i looked at bluetooth devices under WM, and saw that it was not connected. I used the option to connect, but it gives me an error: device could not bo connected because there was a problem in connection or PIN is incorrectlike that. Well, Pin is correct, so I think it is a problem with something else...
- I have a bluetooth headset that works without any problem. I do not use both bluettoth devices at same time
- I've tried to disconnect GPS device, and reconnect again from the beginning, but the problem keeps appearing.
-I've got configured GPS device with port COM6, and the GPS software as also COM6. Without issues till today.
- I've tried to disconnect and reconnect bluetooth in pda, but with no success...
Does anyone know something about this? Can somebody help me?
Recent edit: I've made a full backup and a hard reset, and the problem keeps annoying.....
Hi.
I was using this Rom but I had a lot of problems with my bt device and wifi and finally.... I have wm6.1 again.... Is the most stable and fast wm version... No problems with my bt GPS device and no problems with wifi at office and home...