Hi!
I've installed a great ROM from babak00000, with Windows mobile 6.5, but i'm now having a bluetooth issue:
- i've got a GPS devide that i use. I've installed the device and user until yesterday without problems. But today I had a problem: my GPS software in Prophet did not recognize the gps device.
- i looked at bluetooth devices under WM, and saw that it was not connected. I used the option to connect, but it gives me an error: device could not bo connected because there was a problem in connection or PIN is incorrectlike that. Well, Pin is correct, so I think it is a problem with something else...
- I have a bluetooth headset that works without any problem. I do not use both bluettoth devices at same time
- I've tried to disconnect GPS device, and reconnect again from the beginning, but the problem keeps appearing.
-I've got configured GPS device with port COM6, and the GPS software as also COM6. Without issues till today.
- I've tried to disconnect and reconnect bluetooth in pda, but with no success...
Does anyone know something about this? Can somebody help me?
Recent edit: I've made a full backup and a hard reset, and the problem keeps annoying.....
Hi.
I was using this Rom but I had a lot of problems with my bt device and wifi and finally.... I have wm6.1 again.... Is the most stable and fast wm version... No problems with my bt GPS device and no problems with wifi at office and home...
Related
I have upgraded to rom 1.72 and am trying to get my bluetooth gps setup without using the bluetooth tools. I can get the device added and it sets up the port profile fine. I installed pharos gps software and belkins gps software. The pharos software just exits when I turn it on for the gps to work, and the belkin just brings the ppc to a crawl. It never seems to get any data back though. I used the same gps on my laptop with a bluetooth usb device and it works fine that way. Can anyone give me any suggestions on making this work again on my ppc without having to install the bluetooth tools?
Andy
Before anyone says anything, yes I have tried looking.....
I have a problem with TT5.21 where I can connect to the BT GPS several times but then all of a sudden TT won't connect again. The only way I can do it is to delete the pairing with the GPS reciever and re-pair it setting up the COM ports again. It will then work fine 3 or 4 more times and I have to do it again.
I know the GPS works fine as it works perfect on my Alpine (believe it or not).
Has anyone any ideas?
Thanks in advance.
Yes, I have this problem too, no set times or obvious reasons as to why tomtom loses gps, still appears in bluetooth device list, but tomtom cannot see it, only way to get tomtom to recognise the gps is to delete pairing and re-pair gps.
Eventually figured it out. When setting up the initial pairing (or was it com port), I cleared the use secure connection radio box and it seems to be fine now.
Thanks for your response though and I hope this works for you too.
Is it possible to use both TomTom (with a bluetooth GPS node) and a bluetooth headset at the same time?
I've managed to do it although that was on an old O2 ROM, not the new one.
Hi All,
I'm running the new Rom for a week now and i'm very happy with it.
Although I my Jamin has reset itself once or twice my SD card never dissappeard.
There's a new problem I'm having:
When I start TomTom 5.21 my GPS (Adapt) and activate my bluethoot GPS TomTom keeps telling me there's no GPS..
When I delete the partnership from the Bluetooth settings, then create a new partnership.. it says BT GPS wants to connect, and I have to enter the pin. After This my GPS is working again.. Untill I power of my GPS.
Anyone had the same experience.. or even better... the solution?
Thanks.
Hi , I'm running Copilot and noot had any issue. i no longer use TomTom due to their incompatability. It always seems you have to have an update with every new device with them.
Not very helpful I know but I would hazard a guess its due to TomTom and not your upgrade.
I have an adapt (ad-700) receiver and do not have any problem. I always start the gps device first and then tomtom (tomtom activates bluetooth by itself).
I also get the message "no device" but after 10 seconds or so it finds the gps mouse.
Thank you all. Tried reinstalling TomTom.. after some a couple of try's it worked finally. Thank you for the response.
I'm just going crazy with this problem:
I installed TT6 on the I-mate Jamin, connected to the BT GPS Holux GPSlim236 and it was working. After some hours or days, when I launch TT6, it does not recognize the BT GPS, it displays " no GPS (flight mode)" also if BT is active on the pda.
I tried also to update the firmware to the LvsW AKU 2.3.1 that should be very stable but the problem arised again. If I install again TT& it works again for some hour only.
Anothe strange behaviour is that TT6 is not trying to activate automatically the BT when launched, while after the installation it was.
Any solution?
Thanks in advance
did you disabled the phone?
when the phone is off, even if bluetooth is on, tomtom can not communicate with any bluetooth gps.
a new hope...
Maybe yes, I disabled the phone, as I was doing in my previous iPaq WM2003. I will follow your indication and give feedback asap. The strange thing is that other GPS programs are working with the BT GPS even if the phone is disabled.
Thank you! I could solved it!
Thank you, adl67-san, zadigre-san.
I had same problem with my QTEK9000 & TomTom6.
The problem was TomTom6 can not find GPS receiver(Holux GPSlim240).
But after Phone function is ON, it works well.
(Normally, I use my QTEK9000 without SIM.)
This problem has bother me for 1 month.
Now I can use it.
Thanks a lot again.
Sincerely yours,
Hello, I've got problem with my bluetooth gps (nemerix).
When I'd like to connect to my pda first I'm looking for new devices in bluetooth manager, then parring and seeting outgoing port. And then I'm starting my Navi aplication. It works.
But, when I'm shutting down gps device, turning off buetooth in pda and start it again I've to all tasks mention above - searching, parring and so on. In my opinion,when it's added to my bluetooth devices and properly parred once it should work every time I'd like to use it, however gps device doesn't communicate with pda.
It's quite annoying, why I cannot just start my gps device and my navi aplication and run - I spend a minute with setting connection.
Do anybody know how to fix my problem?
Are you using a custom rom? If so it could be a problem with the rom you are using. I've had the same problem in the past and a different rom fixed the problem.
I've got now Schaps_WM6Pro_Hermes_4.31_WWE_Full, which rom are you using -RanDomIze Final Storm v2.10?
Have you tried "Pocket Buetooth Tools"? You can find it here: http://bluetooth.i-networx.de/download_e.html
I hade major problem pairing my BT-gps to use with Tomtom before I found BTTools.....
I'll try, thanks for advice
Kladden said:
Have you tried "Pocket Buetooth Tools"? You can find it here: http://bluetooth.i-networx.de/download_e.html
I hade major problem pairing my BT-gps to use with Tomtom before I found BTTools.....
Click to expand...
Click to collapse
great tool thanks