I have had this problem;
I previously successfully connected to my work PC with activesync 4.0 over bluetooth & my XDA II running WM2003, now having upgraded to WM2005 I am unable to re-establish an activesync connection via Bluetooth.
The PC is running XP SP1 with a TDK Bluetooth dongle & it's associated drivers (This is known to be setup correctly with other bluetooth connectivity having no problems)
I have tried using the "Geekzone" activesync over bluetooth step through, but I believe this is written for earlier versions of both activesync & Windows Mobile OS.
Would somebody who has successfully achieved an activesync connection via bluetooth post how to set up thanks.
ROM 1.60b.96WWE
Radio 1.17.00
Protocol 1337.28
Related
Hi All,
Before running the upgraded ROM, to enable ActiveSync via Bluetooth, I had to download and install a Bluetooth file from a site I can't remember now. After the upgrade I can't use ActiveSync via Bluetooth and am not sure whether I need to reinstall the same Bluetooth stuff as before as I thought the ROM had Bluetooth fixes in it for ActiveSync etc.
Has anybody else been able to connect via Bluetooth after the upgrade with no other files being installed ?
Thanks,
Rob.
yes i use activesync via bluetooth at work and home using the new rom and installing no other software.
It was a pain getting it to work, and what i did in the end was delete all parterships in activesync and start again from stratch, that worked for me.
This is what i did:
I couldnt get my XDA2 to access the net via BT active synch until i went into start / settings / system / bluetooth settings / bluetooth active synch setup.
It then asks you to bond the XDA2 with your pc ( if its already bonded, delete it ) once done, you then click yes to let the XDA2 use the pc's serial port, do the same on the pc, and connect via BT as normal.
Works great !
Hi,
I used BluetoothGPS to make my PDA connected with my PC.
I can sync, access LAN,... with BluetoothGPS on 1.72
But BluetoothGPS can't run on W2k5.
I wonder if there is a solution for Bluetooth solution for W2k5
Hi, all.
I can't connect Qtek (neither 9000 nor 110) to Notebook via irda (win xp).
I run wmodem on Qtek as it's described in manual, and choose emulate wireless modem via irda, but windows doesn't recognise it as irda modem. It connects, but offer file transfer only.
I tried to setup modem manually on windows first - but which port should i select? It doesn't cleary mentioned in manual... In other words - who successfully connected Qtek with PC via irda, please tell me how.
Thanks.
P.s. Notebook easily recoginzes and installs Samsung mobile phone via IRDA and works perfectly. And Qtek connects as USB modem fine also.
Does anybody successfully used Qtek as GPRS modem via irda?
i have just downgraded from WM6 to WM2003SE (o2 XDA offical rom 1.40 for AUS) and i cannot sync the device.
i have completely set the device back to it's original state, ext rom, main rom, radio rom. it works fine.
i receive an error when i try to sync with my laptop.. (which it used to sync with when i put WM6 on the device).
the error is - cannot verify the version of activesync on your device, a program such as a firewall may be blocking a port activesync uses to connect to your device, you may need to upgrade to a more recent version or activesync
i have removed activesync, deleted all the registry entries, folders and files relating to activesync that i could find. reinstalled activesync, still no luck.
-> i can get the device to sync with my desktop without any problems (i never used the desktop to sync to it when WM6 was installed)
however all my data is on the laptop.
Any ideas ?
what version of activsync are you using??
i think with WM2003SE an older version of activsync is required.
i'm using activesync 4.5 and it has worked before..
it's like the laptop still thinks it's WM6..
the PDA will sync on the desktop (which i don't use) but won't sync on the laptop which has all my data.
Does anybody know what the value of the registry entry under
HKLM/software/microsoft/windows CE services/version should be ??
I'm able to successfully pair my hw6945 with a Yada YD-V22 visor speakerphone via bluetooth, however, when I try to connect to the BT device I get a "connection failed" error message. I've tried soft reset and unchecking encryption; still fails to connect. The device pairs and connects successfully with an HTC Touch Diamond running WM 6. Any suggestions?
HP iPAQ hw6945 running Windows Mobile 5.0 OS 5.1.195 (Build 14989.2.6.0)
13.66MB free storage memory; 20.20MB free program memory
Over 100 views and no replies.
I've tried re-installing the BIOS and updating to the latest drivers and still the device pairs successfully via Bluetooth but fails to connect.
What else can I try? Help, please!