Related
As the title says. I have got TomTom 5.21 running fine on my Exec, but it will only connect to my BT GPS device when the phone radio is switched on. If you go to GPS Status it says "No GPS Device (Flight Mode)" as if Flight Mode in some way explains why the BT connection can't be made and I am stupid for even trying!
So has anybody got this to work with the phone radio switched off?
Whatcha Melty. Not for Universal, but the principle is the same: flight mode disables the phone+bluetooth. However, you want to disable the phone radio only, but leave bluetooth enabled. That requires a reg mod or a third party app.
Have you read this thread?
http://forum.xda-developers.com/viewtopic.php?t=36788&highlight=
V
Hi Vijay,
I hadn't seen that thread. Thanks! I will try out some of the stuff and if I decide it would be better with an app, I'll knock one up. It'll just be a wrapper for TomTom that just forces flight mode off and then starts TomTom. I could run it instead of the normal TomTom app. Mind you, if I'm going to use my Exce as a phone then I might ot bother!
I've used the TAPI lib on the XDA2 to force flight mode off etc for a program for work, so it's not exactly difficult, but I just wondered if I was missing a simple setting somewhere.
i dunno.... looks to me like it's tomtom at fault here.
the wireless manager on my exec is happy to let me switch on bluetooth only, but switch off phone and wireless. it's just that tomtom sees phone off and assumes the worst
it only seems to check on startup though, so for a low-tech workaround you could always leave your phone on, startup tomtom and let it connect to your GPS, then switch back to wireless manager and switch off your phone.
once the connection is established, tomtom doesn't check again, and the WM wireless manager keeps the bluetooth connection up while turning off the phone
That actually makes perfect sense dalelane (although it means TomTom coders are mad). Thanks! :wink:
Have just received my Kingston 1GB Transflash card and installed TTN v602 on my Hermes.
Installation was succesfull but each time I start TTN the software freezes. It wont respond to any screen taps. If I go back to the Today Screen and select the TTN icon in the sys tray it brings TTN back up and it works fine.
Anyone else exerienced this and know of any fix...
Many thanks
Try and wait for a long long time. My Charmer starts TomTom.. in.. almost 2 minutes.
I run TT 6.02 (7980) on an German Vario II
This Version makes nothing Problems
It wont respond to any screen taps. If I go back to the Today Screen and select the TTN icon in the sys tray it brings TTN back up and it works fine.
Click to expand...
Click to collapse
I get the exact same problem sometimes. I just figured that it was doing it because it was reading off the card or something.
Running TTN601 on mine... Have a similar problem... I've setup a key (recorder key) to start software for ease and find if you run it up, hit red end call button then restart (I then use rec button) all is well and it won't lock up.
Very strange...
I did have a problem with it locking up on a longish journey, say 80 miles or so.. I had to re install it and since the re install it has been perfect (watch it lock up now !!)
Also running it on a new 2Gb sandisk card, only £33 off Ebay, not bad value. Just copied one card to the other via 2 card readers, no problems, I mention that as some folks appear to have had problems.
Phil
Well Im glad its not just me - makes me feel better! Still, TTN worked perfectly on my Wizard so I am very confused as to why it gives me probs now.
Maybe its down to the Transflash card. Over the weekend I will do some more testing and re-installation and let you know how I get on.
Merry XMAS everyone!
same problem here. it always seems to crash when i'm entering in a postcode. Always took me about 3 attempts to type in the full code!
Yep, same here as well, tapping the red end call button and then clicking on the tomtom hands again does bring it back but it is very annoying, needs to be fixed though along with the bluetooth issues as well.
I would not of got this phone if i new about these issues, i am sure these problems can be resolved with a new firmware, the trouble is T-Mobile seems to be useless as releasing one. There are other ones released so that might be an option if they dont hurry up and release a new one.
The wizard was much more reliable, had very few issues with that once flashed with molskis rom shame one cant be made for this model.
TTN 6 is a bit of a slug on my tytn, especially when you enter a street and it has to crunch through the list.. it 'crashes' occasionally when you select exit.. apart from that though it starts snappy and does it's job.
In my case, TomTom freezes only when I load big(ger) maps like Western-Europe or the Benelux-Plus. When I load a smaller map, say the Benelux, then TomTom works like a charm, no freezes at all!
I tried TomTom 6.0, 6.01 and 6.02: all the same problems with large(r) maps.
Same Problem
I've the same problem when i use the TT without a GPS-Device. When GPS device is on, there is no problem at all. No Idea Why....
Fuzzi
Hi! I raised the same problem about one month ago but without any reasonable solution. Someone tell to delete the COM port on the BT pair, someone tell to enable security on the COM port of the BT pair... I tried all TTN6 versions (6.0, 6.0.1 and 6.0.2) on my TyTN (also with different ROM versions) but Navigator still freezes when inserting adresses, with or without GPS receiver (I'm using TomTom Wireless GPS MkII)...
See also:
http://forum.xda-developers.com/archive/index.php/t-284440.html
digitaldreams said:
I tried all TTN6 versions (6.0, 6.0.1 and 6.0.2) on my TyTN v
Click to expand...
Click to collapse
I have experience the same with my tytn with latest htc rom I have now installed v5.210 and tested today on 2 trips 20 & 50 mile trips without any freezing so will stick with this for now..
Was there any update to this? or is it basically go back to version 5 of TT?
Cheers
If it any help I'm running TTN601 with a Holux GPSlim236. It is set to use Com port 4 with no additional input or output ports configured.
If I run TT and then within a few seconds try to navigate by entering either a postcode or an address etc it will lock up and I have to exit the program.
I have found that if I run the program up, then close it (it doesn't really appear to shut, just the screen returns to the today screen) then re run TT it will then work without a hitch.. I've setup my voice recorder button to run TT on 1 short press to save even needing the stylus.
I guess it may be a memory problem why it locks up but this method works 100 % for me since I started doing it and it's no great hassle with a key having been configured..
TTN6.01 works fine, I've got all the real voices setup for speed camera warnings etc (the OGG files). I don't bother with the TT cameras, I use pocketgps for mine...
Just incase it's a memory issue I've just checked mine by clicking on the version sats icon, then version icon on the screen.
I'm running version 6.010 (7720) with 16.6MB of free ram and gps driver v1.2.. I understand that there is version 6.02 available but that may cause me problems greater than the minor quick restart one so I will stick with this one for now...
p.s some folks seem to think that the larger the micro sd card you have the slower the Tytn(m3100 in my case) seems to get but I've got a 2 gig card loaded with MP3's and even a couple of full length movies should I get board over christmas and the new year (sad isn't it !) and it appears no slower than with a half empty 1 gig card..
May be some of that is of help..
Phil
Some other strange issues...
Not sure if this problem is related to TT freezing, but after I have been out on a journey and closed TomTom down a few of the icons from my Start --> Settings --> System screen are missing.
I have lost GETPDA.exe so cant post what remains - but things like Device Info are missing. They return after a soft boot.
Anyone else have the same probs?
Happy new year!
I'm using the latest Australian ROM, and TomTom Navigator 6.02, running the Australian map with no issues at all. Navigation is fast, and works perfectly with no crashes - I just returned from a ~2500km journey using TomTom on my phone the whole way with no issues at all.
Running a GlobalSat BT308 bluetooth GPS, security enabled, set to COM0.
Problem Resolved!
Ok - looks like TomTom have released an update that fixes the issue with the Hermes crashing during menu selection.
I now have version 6.100 (7970) installed and it works perfectly!
EDIT - also, this new version is sooo fast!! A vast improvement!
No Issues (with the software at least)
Hello All
I hav ebeen using TomTom v6.0 on my HTC TyTN for 2 months now. I have had no issues at all. No slowness, no crashing. The only issue is the Bluetooth connection to my receiver.
I am using the GB maps, so not huge.
Just waiting now for the update at the end of the month to solve the Bluetooth Issues so that the connection to my Bluetooth receiver does not keep dropping the connection.
O well, we will wait and see
TyTNMan
6.1 not available at tomtom.com
nmonger, do you know, why ver 6.1 is not available at tomtom.com as an update for ver 6.0?
If I bought 6.0, where do I now get 6.1 if not from tomtom website?
Thanks an regards,
ARO
Hi there,
Is there someone using TomTom Navigator 6.03 and experiencing the same strange thing I do?
Everytime I start TomTom the sound is off; the sound off icon is on screen. I have to tap Turn on sound in the preferences menu twice in order to have the sound turned on and to have the icon disappeared.
When I exit TomTom and start it again, the sound is turned off again.
Annoying and no idea how to fix that. Deleting the navigator.cfg didn't help.
MapSettings.cfg in the current Active map folder - is it set to read only per chance? - Mike
JayRayMee.NL said:
Everytime I start TomTom the sound is off; the sound off icon is on screen. I have to tap Turn on sound in the preferences menu twice in order to have the sound turned on and to have the icon disappeared.
When I exit TomTom and start it again, the sound is turned off again.
Click to expand...
Click to collapse
Hi. I am having exactly the same issue here with TT. I've checked my mapsettings.cfg file and it's not read only...The only thing I can think of is it is because my map is installed on the microdrive, not an SD card
Any help appreciated too!
Merlin
Mapsettings.cfg is not read only and my maps (everything on TomTom) is installed on the Storage Card.
I have exactly the same installation running on my Touch as well, and no problems at all. Seems to be something on my X7500 then.... but what!!???
I am having exactly the same problems, it's been driving me potty! TT is installed on storage card, no idea whats causding it!
Same problem here...
However it started when I updated it from 6.01 back on my old Wizard. That worked properly. I did discover that you don't have to go to Prefs... you can get the sound back on by tapping the joystick to the right. Also, it doesn't happen when it's on AC power, but only on battery.
jsp91470 said:
However it started when I updated it from 6.01 back on my old Wizard. That worked properly. I did discover that you don't have to go to Prefs... you can get the sound back on by tapping the joystick to the right. Also, it doesn't happen when it's on AC power, but only on battery.
Click to expand...
Click to collapse
Not a bad workaround, just wish we could find what was causing this.
Just to clear things out, but who has this problem with official and legal versions of TTN 6.03? - E.g. has it something to do with cracked/patched versions?
Mine's legal...
Although I'm starting to regret messing with TomTom. Their customer service is awful. Unless your device is one the approximately 5 devices they officially support, they'll wash their hands of you if you call for help saying your device is "not compatible." I called for support on my Wizard, which to be exact was a Cingular 8125. That phone is not on their list of compatible devices, but its twin, the T-Mobile MDA, is on the list. I called and said I had an 8125 and they refused to help me. I hung up, called back, and said I had an MDA. They tried to help me, but when they didn't have an instant answer for me they just said, "Sorry, we don't have that problem on ours" and started spewing out useless canned knowledge base articles. For heaven's sake, the MDA and 8125 are the SAME PHONE! Also, don't tell them you have WM6, because WM6 is "not compatible." Basically, if you have to call TomTom support, lie through your teeth. I'm waiting for OnCourse Navigator, due out in October or November, and then I may abandon TomTom.
Just to compile information...
OK Let's see:
1) I got my TT6.03 legal with legal maps and I got the problem.
2) Running my old legal TT6.01 I didn't had the problem.
3) If I do it using Prefs I need to activate twice the sound in order to get the mute removed
4) I got the problem running on baterry, using the oficial car charger and using the wall charger. I got the problem all the time no matter what power source I'm using.
5) The "Move Joysting to Right" workaround works great. Thank you very much. That don't solve the problem but makes my live much easier.
So... that's the point. I'm running TT6.03 (legal) over WM5 ROM in spanish.
Best Regards,
mahjong
So.... resuming: it's TomTom Navigator 6.03 with the combination of the HTC X7500/Athena.
The problem isn't there while running 6.03 on a HP iPAQ hx4700, Qtek 9000 and HTC Touch.
I have 6.030 on WM6 English on my Athena and I don't have this problem...
I don't have this problem either. I'm using version 6.0
LOL !!!!
Ok man !!! Is your connection GPRS/EDGE/UTMS/HSDPA is online ?
Because if there's an active connexion Tomtom start allways with the sound off.
Try to disconnect before launching Tomtom
Gsyltc said:
LOL !!!!
Ok man !!! Is your connection GPRS/EDGE/UTMS/HSDPA is online ?
Because if there's an active connexion Tomtom start allways with the sound off.
Try to disconnect before launching Tomtom
Click to expand...
Click to collapse
Then that goes for version 6.03 only. With 6.00 it didn't matter wether the data connection was active or not.
Anyway, I need to stick with 6.03 and live with the mute problem, since 6.03 can work with my voices stored on storage card (instead of MD) and performs a fix in only seconds (instead of 1 - 1,5 minute).
No sound after starting TT6.03
I have the legal version of TT6.03 and I have the problem too. I only have this problem when my phone is connected to the internet using gprs, umts or hsdpa. If their is no connection I do not have this problem. It also happens on other devices for instance the HP iPAQ 6340 and it is a know bug. TomTom know's about it. It will be solved in te next version.
QAN
Gsyltc said:
LOL !!!!
Ok man !!! Is your connection GPRS/EDGE/UTMS/HSDPA is online ?
Because if there's an active connexion Tomtom start allways with the sound off.
Try to disconnect before launching Tomtom
Click to expand...
Click to collapse
BINGO!!! We got a winner here ladies and gentlemans.
Mine has the connection online all the time due to my push-mail solution (Blackberry Connect). I did some test shutting down Blackbery Connect before starting TT and "the problem" just gone.
Thank you. Anyway since I must have connection online all the time the "Joystick move to right" trick is great for me.
TomTom6 Sound
Guys great thread, I am glad to see someone else is struggling with this strange issue. Its really no big deal, its just annoying. Any updates on this issue yet?
And here was me thinking it was my *cough* test *cough* version. Loving the 'fix' taa v much. I might have to write a mortscript that recycles the data connection, rotates the screen and starts TT.
tomtom 6.02-7910 works fine
I also was having problems with tomt 6.032 but the problems does not seem to exist in tomtom 6.02-7910
Hello every body,
Can anyone know if TomTom is ok in htc touch dual?
If yes, can anyone give me a link, were i can download it, and recent map of europe?
best regards
I have TomTom 6 Navigator running fine on my Touch Dual, using a Qstarz BT318 external GPS. There were no problems during installation. Although it is a little awkward having to carry the external GPS, at least it has its own 1100 mAh battery so both devices last a long time in GPS mode.
I couldn't find the TomTom software available to download anywhere (legally). I bought the DVD from this company: http://www.digital-fusion.co.uk/
Item: 1T90.015
Quantity: 1
Product: Tomtom Navigator 6 Software + Maps Of Western Europe Dvd Unit Price: GBP 60.81 (Excl. VAT)
Very impressed by the TomTom software - even with a 2.6" picture, the 3D view is very usable whilst driving.
Thank you very much
Best reagards
if you want to be "naughty" then searching will get you where you want. We can't provide links here I don't think, but all the usual torrenting sites have it.
My (bought) copy, weirdly, boots up when I switch my phone on - it's not in the startup but it does anyway. Perhaps cause I took the shortcut off my home screen?
Also, one thing to be aware of - if your phone is in vibrate mode, and you start Tom Tom, when you have finished & later set your phone to non-vibrate, you'll find it's muted your ringer volume. I missed loads of calls before I realised what the culprit was.
Other than that it works fine on my touch dual, with a similar GPS antenna (incidentally, just posted elsewhere that my battery on my antenna just lasted since Sunday afternoon (it's not Thurs eve) since I didn't realise I'd left it on. A bit astonished at the battery life of the thing!!!
Garmin XT also gets good reviews, some claim it's better.
no problems here w the tom tom.
just take into account the mute fact.
anyway the external gps takes longer than other devices to work fine. the com ports are more complicated than i thought. but nothing u cant solve in a day or two.
i cant put a shortcut in my homescreen. anybody knows how to?
thanks
erkv said:
no problems here w the tom tom.
just take into account the mute fact.
anyway the external gps takes longer than other devices to work fine. the com ports are more complicated than i thought. but nothing u cant solve in a day or two.
i cant put a shortcut in my homescreen. anybody knows how to?
thanks
Click to expand...
Click to collapse
shortcut: look in your today screen items - it's in there.. or should be... in fact it should've appeared by default
em, i found the ext gps easy... just use "other"... NMEA... I think.. took 5 mins to work out.
let me know if you have probs, i can check out the settings used
i know but its doenst appear,
anyway its not a big deal. plus, i guess its a version problem.
and... talking about the ext gps, i guess the prob doenst come from tom tom but the pda. i took me time to figure out the com port number to paired the device.
i have it as com 7, com 4, 4800, check gps automatic.
btw, i didnt use other nmea because i have a bt gps receiver.
i forgot what com port i choose at tomtom.
but no need for that when i connected it thru google maps.
dont know. just works.
thank you for your help.
Tomtom not visible when receiving call
I used to have a HTC 8310 smartphone (Mobile 5 and Tomtom 5.20). The good thing was, that when Tomtom was working and I then received a call on thr 8310, I would see the Tomtom screen again after a few seconds while continuing talking. Only the Tomtom voice would de-activate while speaking to the other person. That was excellent, because I could still see where I was supposed to be driving while speaking to another person on the phone at the same time!
I now have a NIKI 100 (Mobile 6.1 and Tomtom 6) and I find that the Tomtom screen does not re-appear immediately after accepting a call. The screen stays on the dial-screen the whole time. Only after the call is finished, Tomtom comes back automatically.
Does anyone know a way to change this, because it's pretty annoying.
Thanks in advance!
I have the same "problem". Before on my wizard it worked like you describe and now it stays in the dial-screen and Tomtom doesn't reappear. Also when the call is finished I have to switch back manually by clicking on the small icons in the corner on the right bottom.
I also have a NIKI 100, Tomtom 6 and WM6.1 (Niki Project).
Does anybody knows how to fix this?
Hi,
This thread might be ELF specific related as on other devices the problem with the same GPS receivers is not happening!
I own 2 Elf's one running plain original rom and one running Touch Surface and 2 different Bluetooth GPS receivers one is an Adapt AD850 and an el cheapo one GPS20C orso both of them are using passkey's of 4 digits.
I have now for an huge time problems with TomTom connecting to the GPS. It connects sometimes but looses the connection direct after an few seconds. Then it takes ages to get an reconnection or sometimes it won't connect even. But when it has an connection it seems to work fine and i can navigate for hours.
If i switch off orso and want to reconnect the same problems but sometimes it connect directly and works perfect.
When i have connection problems some things might seem to help to get an connection: Switch GPS off and on, Setup in TomTom the GPS again, Disable and enable Bluetooth.
I have tried to pair different times with the GPS but this makes no difference and it also make no difference which GPS i use or wich Elf i use.
The most strange in the whole story is that i previously had an GPS that needed no pass key for pairing and never had these problems. Also the TomTom version makes no differens. Offcourse i tried on one elf various roms and radio versions but this makes no difference.
Oh well maybe santa is bringing me an real navi system
Thanx,
Jerome
This may be obvious but its worth me saying - have you got the phone enabled?
Reason is I often turn my phone off and use my Touch as a mp3 player / video etc and when i fire up the tomtom and GPS reciever if the phone is in an off state then totmtom never gets a proper connection. I spent ages trying to figure out why it only worked sometimes and the realised it was due to the phone connection. Why tomtom needs the phone on I dont know but it wont work otherwise.
Sorry double posted
scorpion66 said:
This may be obvious but its worth me saying - have you got the phone enabled?
Reason is I often turn my phone off and use my Touch as a mp3 player / video etc and when i fire up the tomtom and GPS reciever if the phone is in an off state then totmtom never gets a proper connection. I spent ages trying to figure out why it only worked sometimes and the realised it was due to the phone connection. Why tomtom needs the phone on I dont know but it wont work otherwise.
Click to expand...
Click to collapse
Ok will try this later and will report back here.
Poirt said:
Ok will try this later and will report back here.
Click to expand...
Click to collapse
Well no solution .. still drops GPS connections and take ages before getting an connection.
Have overclocked the Elf to 273 Mhz now and seems an bit more stable so might be an TomTom Issue with high cpu usage ?