Have just received my Kingston 1GB Transflash card and installed TTN v602 on my Hermes.
Installation was succesfull but each time I start TTN the software freezes. It wont respond to any screen taps. If I go back to the Today Screen and select the TTN icon in the sys tray it brings TTN back up and it works fine.
Anyone else exerienced this and know of any fix...
Many thanks
Try and wait for a long long time. My Charmer starts TomTom.. in.. almost 2 minutes.
I run TT 6.02 (7980) on an German Vario II
This Version makes nothing Problems
It wont respond to any screen taps. If I go back to the Today Screen and select the TTN icon in the sys tray it brings TTN back up and it works fine.
Click to expand...
Click to collapse
I get the exact same problem sometimes. I just figured that it was doing it because it was reading off the card or something.
Running TTN601 on mine... Have a similar problem... I've setup a key (recorder key) to start software for ease and find if you run it up, hit red end call button then restart (I then use rec button) all is well and it won't lock up.
Very strange...
I did have a problem with it locking up on a longish journey, say 80 miles or so.. I had to re install it and since the re install it has been perfect (watch it lock up now !!)
Also running it on a new 2Gb sandisk card, only £33 off Ebay, not bad value. Just copied one card to the other via 2 card readers, no problems, I mention that as some folks appear to have had problems.
Phil
Well Im glad its not just me - makes me feel better! Still, TTN worked perfectly on my Wizard so I am very confused as to why it gives me probs now.
Maybe its down to the Transflash card. Over the weekend I will do some more testing and re-installation and let you know how I get on.
Merry XMAS everyone!
same problem here. it always seems to crash when i'm entering in a postcode. Always took me about 3 attempts to type in the full code!
Yep, same here as well, tapping the red end call button and then clicking on the tomtom hands again does bring it back but it is very annoying, needs to be fixed though along with the bluetooth issues as well.
I would not of got this phone if i new about these issues, i am sure these problems can be resolved with a new firmware, the trouble is T-Mobile seems to be useless as releasing one. There are other ones released so that might be an option if they dont hurry up and release a new one.
The wizard was much more reliable, had very few issues with that once flashed with molskis rom shame one cant be made for this model.
TTN 6 is a bit of a slug on my tytn, especially when you enter a street and it has to crunch through the list.. it 'crashes' occasionally when you select exit.. apart from that though it starts snappy and does it's job.
In my case, TomTom freezes only when I load big(ger) maps like Western-Europe or the Benelux-Plus. When I load a smaller map, say the Benelux, then TomTom works like a charm, no freezes at all!
I tried TomTom 6.0, 6.01 and 6.02: all the same problems with large(r) maps.
Same Problem
I've the same problem when i use the TT without a GPS-Device. When GPS device is on, there is no problem at all. No Idea Why....
Fuzzi
Hi! I raised the same problem about one month ago but without any reasonable solution. Someone tell to delete the COM port on the BT pair, someone tell to enable security on the COM port of the BT pair... I tried all TTN6 versions (6.0, 6.0.1 and 6.0.2) on my TyTN (also with different ROM versions) but Navigator still freezes when inserting adresses, with or without GPS receiver (I'm using TomTom Wireless GPS MkII)...
See also:
http://forum.xda-developers.com/archive/index.php/t-284440.html
digitaldreams said:
I tried all TTN6 versions (6.0, 6.0.1 and 6.0.2) on my TyTN v
Click to expand...
Click to collapse
I have experience the same with my tytn with latest htc rom I have now installed v5.210 and tested today on 2 trips 20 & 50 mile trips without any freezing so will stick with this for now..
Was there any update to this? or is it basically go back to version 5 of TT?
Cheers
If it any help I'm running TTN601 with a Holux GPSlim236. It is set to use Com port 4 with no additional input or output ports configured.
If I run TT and then within a few seconds try to navigate by entering either a postcode or an address etc it will lock up and I have to exit the program.
I have found that if I run the program up, then close it (it doesn't really appear to shut, just the screen returns to the today screen) then re run TT it will then work without a hitch.. I've setup my voice recorder button to run TT on 1 short press to save even needing the stylus.
I guess it may be a memory problem why it locks up but this method works 100 % for me since I started doing it and it's no great hassle with a key having been configured..
TTN6.01 works fine, I've got all the real voices setup for speed camera warnings etc (the OGG files). I don't bother with the TT cameras, I use pocketgps for mine...
Just incase it's a memory issue I've just checked mine by clicking on the version sats icon, then version icon on the screen.
I'm running version 6.010 (7720) with 16.6MB of free ram and gps driver v1.2.. I understand that there is version 6.02 available but that may cause me problems greater than the minor quick restart one so I will stick with this one for now...
p.s some folks seem to think that the larger the micro sd card you have the slower the Tytn(m3100 in my case) seems to get but I've got a 2 gig card loaded with MP3's and even a couple of full length movies should I get board over christmas and the new year (sad isn't it !) and it appears no slower than with a half empty 1 gig card..
May be some of that is of help..
Phil
Some other strange issues...
Not sure if this problem is related to TT freezing, but after I have been out on a journey and closed TomTom down a few of the icons from my Start --> Settings --> System screen are missing.
I have lost GETPDA.exe so cant post what remains - but things like Device Info are missing. They return after a soft boot.
Anyone else have the same probs?
Happy new year!
I'm using the latest Australian ROM, and TomTom Navigator 6.02, running the Australian map with no issues at all. Navigation is fast, and works perfectly with no crashes - I just returned from a ~2500km journey using TomTom on my phone the whole way with no issues at all.
Running a GlobalSat BT308 bluetooth GPS, security enabled, set to COM0.
Problem Resolved!
Ok - looks like TomTom have released an update that fixes the issue with the Hermes crashing during menu selection.
I now have version 6.100 (7970) installed and it works perfectly!
EDIT - also, this new version is sooo fast!! A vast improvement!
No Issues (with the software at least)
Hello All
I hav ebeen using TomTom v6.0 on my HTC TyTN for 2 months now. I have had no issues at all. No slowness, no crashing. The only issue is the Bluetooth connection to my receiver.
I am using the GB maps, so not huge.
Just waiting now for the update at the end of the month to solve the Bluetooth Issues so that the connection to my Bluetooth receiver does not keep dropping the connection.
O well, we will wait and see
TyTNMan
6.1 not available at tomtom.com
nmonger, do you know, why ver 6.1 is not available at tomtom.com as an update for ver 6.0?
If I bought 6.0, where do I now get 6.1 if not from tomtom website?
Thanks an regards,
ARO
Related
Hi Guys,
As you may have read from previous posts, TomTom & I have had a very stormy relationship! Add to that huge memory leak problems on my XDA IIi & I was sure that Nav5 was going to get the usual thumbs down, but after removing the O2 Active UI by following the instuctions here:-
http://forum.xda-developers.com/viewtopic.php?t=18963
(didn't even need a hard re-set!!! :lol: my memory is fine now.
Loaded Nav 5 onto my unit from update CD
Then loaded all the maps from the 6 CDs (Hmm, that bit is still very naff but better than with Nav3), they won't quite fit onto 2 1gb SDs, & activated the free trial of TT Plus.
Then I drove from Sudbury, Suffolk to Dover via London, using the GB map, then on to Belfort, France (near Swiss & German borders) I always go via Luxembourg to avoid the french tolls. put in Belfort and Main Roads of EU kicked in from main app. it immediately asked if I wanted to avoid the toll roads, clicked yes & lo & behold it found my tried & tested route! Impressed! What's more it din't crash once :wink:
But when you get an incoming call it cuts of your GPS connection but then (most of the time) it re-establishes it (tho sometimes you have to re-configure, but that's now a lot easier if you use a TT receiver)
Last night used it all the way to Roskilde, Denmark, tonight we're off to Kristiansand, Norway. So far so, very, good!!!!
See! When something's right I big it up! I don't only whinge about the negative bits!!!
So far it's a big well done to TomTom for this version (XDA IIi-wise anyway)
Same here matey. Recently installed TT5 with GB maps only onto my XDA 2. No problems at all, connects within 20secs, never crashed yet and even works when receiving calls on my bt headset. GPS doesn't disconnect and when I hang up, it shows me at the correct location.
GENIUS
ive got an XDA2i and my TT5 seems to crash more often than not. especially when searching for POIs (ie take me to nearest petrol station... CRASH)
i admit i am using a hooky version, but if it's this bad i wont be buying it! (which i intended to)
im running an XDA2i with corporate install (no O2 Active UI) and an aftermarket bluetooth GPS.
its also annoying that TT5 disables bluetooth when you quit, and its v. awkward to re-enable it whilst driving (its a little button afterall...)
I'm using a hooky version too. TT5 £10 from ebay!!! Works like a dream. I've got an XDA II, removed 02 Active UI.
Bluetooth doesn't disconnect when TT5 is ended. I must be so lucky!!
jim galbally said:
ive got an XDA2i and my TT5 seems to crash more often than not. especially when searching for POIs (ie take me to nearest petrol station... CRASH)
i admit i am using a hooky version, but if it's this bad i wont be buying it! (which i intended to)
im running an XDA2i with corporate install (no O2 Active UI) and an aftermarket bluetooth GPS.
its also annoying that TT5 disables bluetooth when you quit, and its v. awkward to re-enable it whilst driving (its a little button afterall...)
Click to expand...
Click to collapse
I'be got a ~5mb patch which will fix this problem, EVERY time I turned on certain POI's it would crash
Not any more and it seems MUCH more stable.
If you've got anywhere I can up it, let me know.
jim galbally said:
ive got an XDA2i and my TT5 seems to crash more often than not. especially when searching for POIs (ie take me to nearest petrol station... CRASH)
i admit i am using a hooky version, but if it's this bad i wont be buying it! (which i intended to)
im running an XDA2i with corporate install (no O2 Active UI) and an aftermarket bluetooth GPS.
its also annoying that TT5 disables bluetooth when you quit, and its v. awkward to re-enable it whilst driving (its a little button afterall...)
Click to expand...
Click to collapse
Jim, there is no way of knowing what bugs can arise when using patched/cracked software. I never use bluetooth gps either since I got an xda because I see so many problems, also if its for car use only I think a wired gps is more practical/reliable.
@ PC_Arcade:
You could always post the patch here, but if not then you could always PM me with the patch, it would be HIGHLY Appreciated!!!!!
Cheers!!!!!!!
OK, I've PM'd you the patch
Please could you upload it to the ftp for me (I'm @ work and I can't use FTP) so it can be linked here?
cruisin-thru said:
Jim, there is no way of knowing what bugs can arise when using patched/cracked software. I never use bluetooth gps either since I got an xda because I see so many problems, also if its for car use only I think a wired gps is more practical/reliable.
Click to expand...
Click to collapse
...TomTom5 is known to have a lot of bugs, even for legit users. I've had every version of TomTom and every major release sucks till they patch it..
@ PC_Arcade:
If the patch is too large for PM, you could always email me!
Thanks again in advance!
Cheers!!!
it's just over 5mb, too big for hotmail too IIRC
dangel said:
cruisin-thru said:
Jim, there is no way of knowing what bugs can arise when using patched/cracked software. I never use bluetooth gps either since I got an xda because I see so many problems, also if its for car use only I think a wired gps is more practical/reliable.
Click to expand...
Click to collapse
...TomTom5 is known to have a lot of bugs, even for legit users. I've had every version of TomTom and every major release sucks till they patch it..
Click to expand...
Click to collapse
Just for the record I am a legit user and I like TomTom 5 just for one reason and that is the street signing, its like somebody is holding the sign out for you to read as you go along, neat.
OK, the patch is here
I have been totally unable to upload it onto the ftp here
Could someone please move it to there so I can change the link?
Thanks VERY much for the patch Arcade, have yet to test it, but I'm sure it will help. Installed it into the "2577" folder, is that correct? Its the only one with "ttn.cab" in it.
On a seperate note I want to install TomTom on the main memory of my XDA, with the maps still on SD card. I've heard this helps. Anyone know exactly which folders I need to copy to memory? Is it all, except maps? How will TTN know to look on the SD card for the maps though ?
Chop - thanks for success story, I brought the XDA and TTN5 expecially for a road trip around europe in a months time. Although I'm taking paper maps for backup, I was hoping I would be able to rely on TTN5. Don't think thats gonna happen now.
foaf said:
Thanks VERY much for the patch Arcade, have yet to test it, but I'm sure it will help. Installed it into the "2577" folder, is that correct? Its the only one with "ttn.cab" in it.
Click to expand...
Click to collapse
Not quite, you need to copy all the files in the rar over then run the .cab file. which will re-install TTN5
For safety's sake it might be work backing up your data.chk file as well.
On a seperate note I want to install TomTom on the main memory of my XDA, with the maps still on SD card. I've heard this helps. Anyone know exactly which folders I need to copy to memory? Is it all, except maps? How will TTN know to look on the SD card for the maps though ?
Click to expand...
Click to collapse
The easiest way is to reinstall tomtom using the patch I posted and just install it to main memory, it will automatically use the maps on the card
All I have on the storage card is the GB map directory and an empty tomtom directory, hope that helps
Chop - thanks for success story, I brought the XDA and TTN5 expecially for a road trip around europe in a months time. Although I'm taking paper maps for backup, I was hoping I would be able to rely on TTN5. Don't think thats gonna happen now.
Click to expand...
Click to collapse
TTN5 is fantastic, I can't remember how I lived without it :lol:
It's incredibly stable now too, although I did have to create a blank directory called tomtom on the SD card to get 7 digit postcodes to work
to make the postcodes work you need to put the file in a folder called zip in the root of the sd card.
Hi all
Could you tell me which file i have to put in the ZIP folder on the SD card?
@ pc_arcade : Is it the poi.dat file that is patched or the ttn.cab ?
Will it only work for GB map or for all maps ?
pleun said:
@ pc_arcade : Is it the poi.dat file that is patched or the ttn.cab ?
Will it only work for GB map or for all maps ?
Click to expand...
Click to collapse
It's the content of the cab file that contains the patched files
AFAIK it works for all maps, can anyone confirm?
Can you tell me how to get full (7 didget) postcode working please ?????
I have installed a (legitimate since you ask) copy of tomtom NAVIGATOR 6 onto my MDA Vario II. The 4+ Mb programme resides in main memory and the Western_Europe map and everything else is on the 2Gb Sandisk Micro SD card. I have a Fuzion SiRF starIII bluetooth GPS receiver. tomtom's US website says the hardware and software are compatible, the UK site does not. The programme runs very slowly (it's not smooth as I have seen demonstrated on a Mio, which had a 312Mhz processor, but is stilted). Sometimes the machine locks up and I have to press the 'OK' button. When browsing the map, the machine struggles to process the picture. I ensure that there are no running programmes. What is the cause, please? Could it be that the hardware and software are incompatible?
just try to flash aku 3.3 to your vario. it will make ur phone work smooth and will not hang at all. then u will be able to run tomtom 6 perfectly
Rather than risk aku 3.3 issues I suggest you are probably right and there is soe sort of hardware issue. I have navigator 6 and TOMTOM BT receiver and hav absolutely no issues at all
I use TT6 on a daily basis and I can say that under WM5 AKU2.3 it used to hang very often when putting post code. I ran ok. After flashing AKU3.3 it works flawlessly. The same with WM6. Now it also seems to run a little bit faster.
Hi, everybody,
any ono knows where a can find a tomtom software for my Asus p535.Sorry to ask but i'm new on this matter and don't know how to do it.
Many thanks...
silvino said:
Hi, everybody,
any ono knows where a can find a tomtom software for my Asus p535.Sorry to ask but i'm new on this matter and don't know how to do it.
Many thanks...
Click to expand...
Click to collapse
Welcome, but you are in the wrong place my friend. This is the HTC Hermes forum. This site is primarily for HTC devices. However here is Tomtom 6 for PPC phones (official tomtom site):
http://www.tomtom.com/products/category.php?ID=2&Lid=1
Mike
What you need to do is disable all the POI's except the speed cameras. Mine did exactly the same thing. You can still navigate to the POI's, they just don't show up as you're driving past.
Cheers.
ok... maybe you guys who have already told him to upgrade his phone to aka3... somthing or other do know best BUT...
could you please say what version of tomtom 6 you have. (there are at least 3 versions i have used)
to find this
load tomtom
on the navigation window tap the section of the screen that shows GPS signal strenth this will load the route summary window.
in here below the right hand side pannel that again show the GPS signal strength it should say the version number 6.XXX
please let me know what versino you have... i have found varying levels of stability and performace with diff versions of tomtom.. might be as simple as a different tomtom build to resolve your issues.
Acuum.
Yostin said:
What you need to do is disable all the POI's except the speed cameras. Mine did exactly the same thing. You can still navigate to the POI's, they just don't show up as you're driving past.
Cheers.
Click to expand...
Click to collapse
yep this is the same on mine, disabled all but a few POIs and no or very rare freezes. if it does freeze up hit the hangup button and relaunch.
there was some hope with the Version 7 tomtom out soon that there would be a fix for the problem.
Acuum2 said:
ok... maybe you guys who have already told him to upgrade his phone to aka3... somthing or other do know best BUT...
could you please say what version of tomtom 6 you have. (there are at least 3 versions i have used)
to find this
load tomtom
on the navigation window tap the section of the screen that shows GPS signal strenth this will load the route summary window.
in here below the right hand side pannel that again show the GPS signal strength it should say the version number 6.XXX
please let me know what versino you have... i have found varying levels of stability and performace with diff versions of tomtom.. might be as simple as a different tomtom build to resolve your issues.
Acuum.
Click to expand...
Click to collapse
My Hermes is running with AKU 3.3 and my TomTom is 6.0.30
ok. i have had pretty good results with 6.0.30 but it might be worth you trying the 6.0.20 version and see how you get on.
at least you will loose the anoying mute on start bug. (the phone sees a data connection and asuumes its a phone calls so starts in mute.)
ok well the results your described i saw with the first tomtom 6 i used, im assumeing it was on 6.0.00 but i have had pretty good results with 6.0.30 but
it might be worth you trying the 6.0.20 version and see how you get on. I'm using that this week by mistake since my last hard reset but its been stable for me.
at least you will loose the anoying 6.0.30 mute on start bug. (the phone sees a data connection and asuumes its a phone calls so starts in mute.)
Hi there,
Is there someone using TomTom Navigator 6.03 and experiencing the same strange thing I do?
Everytime I start TomTom the sound is off; the sound off icon is on screen. I have to tap Turn on sound in the preferences menu twice in order to have the sound turned on and to have the icon disappeared.
When I exit TomTom and start it again, the sound is turned off again.
Annoying and no idea how to fix that. Deleting the navigator.cfg didn't help.
MapSettings.cfg in the current Active map folder - is it set to read only per chance? - Mike
JayRayMee.NL said:
Everytime I start TomTom the sound is off; the sound off icon is on screen. I have to tap Turn on sound in the preferences menu twice in order to have the sound turned on and to have the icon disappeared.
When I exit TomTom and start it again, the sound is turned off again.
Click to expand...
Click to collapse
Hi. I am having exactly the same issue here with TT. I've checked my mapsettings.cfg file and it's not read only...The only thing I can think of is it is because my map is installed on the microdrive, not an SD card
Any help appreciated too!
Merlin
Mapsettings.cfg is not read only and my maps (everything on TomTom) is installed on the Storage Card.
I have exactly the same installation running on my Touch as well, and no problems at all. Seems to be something on my X7500 then.... but what!!???
I am having exactly the same problems, it's been driving me potty! TT is installed on storage card, no idea whats causding it!
Same problem here...
However it started when I updated it from 6.01 back on my old Wizard. That worked properly. I did discover that you don't have to go to Prefs... you can get the sound back on by tapping the joystick to the right. Also, it doesn't happen when it's on AC power, but only on battery.
jsp91470 said:
However it started when I updated it from 6.01 back on my old Wizard. That worked properly. I did discover that you don't have to go to Prefs... you can get the sound back on by tapping the joystick to the right. Also, it doesn't happen when it's on AC power, but only on battery.
Click to expand...
Click to collapse
Not a bad workaround, just wish we could find what was causing this.
Just to clear things out, but who has this problem with official and legal versions of TTN 6.03? - E.g. has it something to do with cracked/patched versions?
Mine's legal...
Although I'm starting to regret messing with TomTom. Their customer service is awful. Unless your device is one the approximately 5 devices they officially support, they'll wash their hands of you if you call for help saying your device is "not compatible." I called for support on my Wizard, which to be exact was a Cingular 8125. That phone is not on their list of compatible devices, but its twin, the T-Mobile MDA, is on the list. I called and said I had an 8125 and they refused to help me. I hung up, called back, and said I had an MDA. They tried to help me, but when they didn't have an instant answer for me they just said, "Sorry, we don't have that problem on ours" and started spewing out useless canned knowledge base articles. For heaven's sake, the MDA and 8125 are the SAME PHONE! Also, don't tell them you have WM6, because WM6 is "not compatible." Basically, if you have to call TomTom support, lie through your teeth. I'm waiting for OnCourse Navigator, due out in October or November, and then I may abandon TomTom.
Just to compile information...
OK Let's see:
1) I got my TT6.03 legal with legal maps and I got the problem.
2) Running my old legal TT6.01 I didn't had the problem.
3) If I do it using Prefs I need to activate twice the sound in order to get the mute removed
4) I got the problem running on baterry, using the oficial car charger and using the wall charger. I got the problem all the time no matter what power source I'm using.
5) The "Move Joysting to Right" workaround works great. Thank you very much. That don't solve the problem but makes my live much easier.
So... that's the point. I'm running TT6.03 (legal) over WM5 ROM in spanish.
Best Regards,
mahjong
So.... resuming: it's TomTom Navigator 6.03 with the combination of the HTC X7500/Athena.
The problem isn't there while running 6.03 on a HP iPAQ hx4700, Qtek 9000 and HTC Touch.
I have 6.030 on WM6 English on my Athena and I don't have this problem...
I don't have this problem either. I'm using version 6.0
LOL !!!!
Ok man !!! Is your connection GPRS/EDGE/UTMS/HSDPA is online ?
Because if there's an active connexion Tomtom start allways with the sound off.
Try to disconnect before launching Tomtom
Gsyltc said:
LOL !!!!
Ok man !!! Is your connection GPRS/EDGE/UTMS/HSDPA is online ?
Because if there's an active connexion Tomtom start allways with the sound off.
Try to disconnect before launching Tomtom
Click to expand...
Click to collapse
Then that goes for version 6.03 only. With 6.00 it didn't matter wether the data connection was active or not.
Anyway, I need to stick with 6.03 and live with the mute problem, since 6.03 can work with my voices stored on storage card (instead of MD) and performs a fix in only seconds (instead of 1 - 1,5 minute).
No sound after starting TT6.03
I have the legal version of TT6.03 and I have the problem too. I only have this problem when my phone is connected to the internet using gprs, umts or hsdpa. If their is no connection I do not have this problem. It also happens on other devices for instance the HP iPAQ 6340 and it is a know bug. TomTom know's about it. It will be solved in te next version.
QAN
Gsyltc said:
LOL !!!!
Ok man !!! Is your connection GPRS/EDGE/UTMS/HSDPA is online ?
Because if there's an active connexion Tomtom start allways with the sound off.
Try to disconnect before launching Tomtom
Click to expand...
Click to collapse
BINGO!!! We got a winner here ladies and gentlemans.
Mine has the connection online all the time due to my push-mail solution (Blackberry Connect). I did some test shutting down Blackbery Connect before starting TT and "the problem" just gone.
Thank you. Anyway since I must have connection online all the time the "Joystick move to right" trick is great for me.
TomTom6 Sound
Guys great thread, I am glad to see someone else is struggling with this strange issue. Its really no big deal, its just annoying. Any updates on this issue yet?
And here was me thinking it was my *cough* test *cough* version. Loving the 'fix' taa v much. I might have to write a mortscript that recycles the data connection, rotates the screen and starts TT.
tomtom 6.02-7910 works fine
I also was having problems with tomt 6.032 but the problems does not seem to exist in tomtom 6.02-7910
Hello every body,
Can anyone know if TomTom is ok in htc touch dual?
If yes, can anyone give me a link, were i can download it, and recent map of europe?
best regards
I have TomTom 6 Navigator running fine on my Touch Dual, using a Qstarz BT318 external GPS. There were no problems during installation. Although it is a little awkward having to carry the external GPS, at least it has its own 1100 mAh battery so both devices last a long time in GPS mode.
I couldn't find the TomTom software available to download anywhere (legally). I bought the DVD from this company: http://www.digital-fusion.co.uk/
Item: 1T90.015
Quantity: 1
Product: Tomtom Navigator 6 Software + Maps Of Western Europe Dvd Unit Price: GBP 60.81 (Excl. VAT)
Very impressed by the TomTom software - even with a 2.6" picture, the 3D view is very usable whilst driving.
Thank you very much
Best reagards
if you want to be "naughty" then searching will get you where you want. We can't provide links here I don't think, but all the usual torrenting sites have it.
My (bought) copy, weirdly, boots up when I switch my phone on - it's not in the startup but it does anyway. Perhaps cause I took the shortcut off my home screen?
Also, one thing to be aware of - if your phone is in vibrate mode, and you start Tom Tom, when you have finished & later set your phone to non-vibrate, you'll find it's muted your ringer volume. I missed loads of calls before I realised what the culprit was.
Other than that it works fine on my touch dual, with a similar GPS antenna (incidentally, just posted elsewhere that my battery on my antenna just lasted since Sunday afternoon (it's not Thurs eve) since I didn't realise I'd left it on. A bit astonished at the battery life of the thing!!!
Garmin XT also gets good reviews, some claim it's better.
no problems here w the tom tom.
just take into account the mute fact.
anyway the external gps takes longer than other devices to work fine. the com ports are more complicated than i thought. but nothing u cant solve in a day or two.
i cant put a shortcut in my homescreen. anybody knows how to?
thanks
erkv said:
no problems here w the tom tom.
just take into account the mute fact.
anyway the external gps takes longer than other devices to work fine. the com ports are more complicated than i thought. but nothing u cant solve in a day or two.
i cant put a shortcut in my homescreen. anybody knows how to?
thanks
Click to expand...
Click to collapse
shortcut: look in your today screen items - it's in there.. or should be... in fact it should've appeared by default
em, i found the ext gps easy... just use "other"... NMEA... I think.. took 5 mins to work out.
let me know if you have probs, i can check out the settings used
i know but its doenst appear,
anyway its not a big deal. plus, i guess its a version problem.
and... talking about the ext gps, i guess the prob doenst come from tom tom but the pda. i took me time to figure out the com port number to paired the device.
i have it as com 7, com 4, 4800, check gps automatic.
btw, i didnt use other nmea because i have a bt gps receiver.
i forgot what com port i choose at tomtom.
but no need for that when i connected it thru google maps.
dont know. just works.
thank you for your help.
Tomtom not visible when receiving call
I used to have a HTC 8310 smartphone (Mobile 5 and Tomtom 5.20). The good thing was, that when Tomtom was working and I then received a call on thr 8310, I would see the Tomtom screen again after a few seconds while continuing talking. Only the Tomtom voice would de-activate while speaking to the other person. That was excellent, because I could still see where I was supposed to be driving while speaking to another person on the phone at the same time!
I now have a NIKI 100 (Mobile 6.1 and Tomtom 6) and I find that the Tomtom screen does not re-appear immediately after accepting a call. The screen stays on the dial-screen the whole time. Only after the call is finished, Tomtom comes back automatically.
Does anyone know a way to change this, because it's pretty annoying.
Thanks in advance!
I have the same "problem". Before on my wizard it worked like you describe and now it stays in the dial-screen and Tomtom doesn't reappear. Also when the call is finished I have to switch back manually by clicking on the small icons in the corner on the right bottom.
I also have a NIKI 100, Tomtom 6 and WM6.1 (Niki Project).
Does anybody knows how to fix this?
Hi
I have installed tomtom 7 version 7.450 / 7.451 both these version install fine and work apart from the fact they dont display how many sats are in range it is blank as if nothing but still works (annoying).
I also installed the latest one which is 7.915.916 (i think) this one again works fine and shows the sats but tomtom Traffic wont enable, just comes back saying need to setup a connection on the phone or in tomtom home (connection already there of course and works fine on 7.450/7.451).
Version 7.910.9185 (think this is correct) seems to work ok with traffic as well but ALL verisons seem to suffer from the same problem and that is when you connect it to tomtom home it displays the device id that is connected to the tomtom account and then shows the device connected to the computer as being different. The serial no's of both devices are identical apart from on the on tomtom thinks is registered to the account has a capital letter at the start and for some reason it has lower case letters in the middle (still the same serial no). the one that is says you are connecting to the computer displays the correct serial with NO capital T and letters in the middle are all caps. very strange indeed. Have rung tomtom and got them to reset my account. this works the first time you then connect to tomtom home, but as soon as you disconect and reconnect it says the device is not linked to the account displays the serial no slightly different to what it should be.
This usually would not be a problem but i have a speed camera subscription with tomtom and I cannot get them to download because of this. My traffic works fine and the actual device code stays the same within tomtom just this serial no issue.
I have tried all tomtom homes ranging from 1.5 right the way through to 2.6 (latest), 1.5 does work to a certain degree and does not show the serial no error but does not work with v7+8 maps so useless.
Anyone got any thoughts or is this a tomtom problem because they dont officially support the device ?
If not i will just go back to using my pocket world camera subscription, just easier to use this as you can download the updates to cameras whilst on the move.
Thanks
Update.
It appears you can download the camera updates manually from the tomtom site so now not too much of a problem, but definately one to watch out for if you have any extra paid for services from tomtom with this phone.
tom tom
i installed the same version of tom tom, but now my bluetooth will not start up, does anybody have a soluton for this problem
regards peter
[email protected]
This is to do with the 2 bt files contained in the cab file you installed, only way to get back for me when i done this was to hard reset. I then removed the 2 files from the cab file using wincab manager.
there is a thread on this forum about this very problem.
For other people....
regarding my original issue on post#1, i have now installed the tomtom camera's manually as this works fine. I will try out TTHome once they release a version that is definitely compatible with the Touch Pro 2. For now i will use 7.451 as although the sats dont display on screen this still works and does not seem to suffer the lag when navigating like the later version i.e. 7.915.916 / 7.910