Database Users

Storage Card Problems

Hi,
I have a problem in recognizing my Transcend 2 GB SD-Card.
During operation the MDA Pro "looses" my storage card. I do not need to move the MDA. It also happens when it is on the table.
When I eject the card and put it in again it is recognized again.
Do you have a suggestion what this can be?
Mike

****, I just ordered the same card two days ago. Should arrive today or tomorrow. I let you know what happens.

Unless your card is faulty, try reformatting the card (I know you don't usually have to do this staight out of the box). I have had this problem before, but on the i-mate jam and it would read the card in my PC, but not my LapTop, which has a dedicated SD slot. Go figure. Tried formatting to FAT and FAT32, but I think it doesn't make too much of a difference. For me it came down to the type of SD card being used!
My 1GB Scandisk card works flawlessly and quickly wherever I put it, but my 2GB Scandisk SD Ultra II only works in my PC and transfer rate seems noticeably slower. :?

I already formatted the SD-Card. I also tried Low Level Format with
Pocket Mechanic.
I haven´t found failures with a r/w test. On the PC there are no problems.
Mike

Send it back! :evil:

Send it back! :evil:

Having 2GB MMC works fine with me... Thank God.. was worried

I have the same problem with the Transcend 2GB card. When syncing Avantgo to the card I get a "write teimeout" error. The card is still there when I look at it with the explorer.

2GB SD card
I have no problems with a 2GB Sandisk SD card.

I bought an Integral 2GB High Speed SD card. Initially, my JASJAR refused to recognise the card as anything more than 128 MB. I tried formatting it with Pocket Mechanic (Low level and normal format) - still 128MB. My notebook (with a built-in SD card reader) also saw it a 128 MB. My EPSON card reader did not recognise it at all.
After finding a post on a forum through Google, I found out that the iMate JAM apparently creates a new partition on the 2GB card, and that it was a known problem (for the JAM).
Using Partition Magic, we saw that it in fact created three partitions (128 MB, 1GB and the remainder, but we could not format or use the other).
My husband got the brilliant idea to put the card in my Nikon CoolPix, which told us that the card was not formatted. He told the camera to format it, which worked -- I can now use the card as 2GB in both my JASJAR and my laptop.
I hope this helps somebody ...

Re: 2GB SD card
paulrousseau said:
I have no problems with a 2GB Sandisk SD card.
Click to expand...
Click to collapse
Which type?
THX!

Got no probs on my scandisc ultraII card on jasjar either, but my laptop won't recognise it! :?
Good thing I have a PC too! :lol:

No problems with my UltraII card either...
I always format my cards with my PC or Laptop before using them, and it's always been fine in PPC, PC, and Laptop.

iMate Jas-Jar 2GB SD Card

I was looking to buy a memory card for my jas-jar and was surprised by this page on Kingston's site which says that it only supports 1GB maximum memory. Does anyone have a 2GB card here, anyone used it with their universal?
Kingston

I am using a 2Gb card no problems at all

could you tell me the company and other details of the SD card model etc?

I have a 150X 2GB ADATA SD CARD and works perfectly!! installed in an i-mate JASJAR. I bought it on ebay.

Same here, I am using a 2GB Sandisk Ultra (Black color) and no problems.

I'm Using 2GB Kingston ultimate X120 with no problem at all

Mine is 1 120x "hyper speed", "MAGU" brand card - works fine

I've read it working with a 4GB card also, worth googling to make sure.
Think I'll make that my next card if so, end of Jan.
On that point, it's ridiculous to think that my first hard drive was a massive 40MEGABYTE one in a 386 Amstrad.... here we are with something a hundred times that, the size of a postage stamp.
Madness, but GOOD madness....

My first SD card is a transcend 4GB card but I encountered problems with it. I can store and run applications normally on the 4GB card, but the camera application can't use the card as a means of storage. Thus off it went back for return. I bought the San Disk 2GB Ultra instead and never had any problems.

I can also confirm a working 2GB Ridata 150x SD working ok on my jasjar.
Had to reformat it on a pc the first time, tough, because straigth from the packaging, i only read 1gb capacity in the jasjar.
After formating, all's well!
Still, i didn't saw almost any speed increase...
I know that the device itself probably doesnt get to the top speed of the card, but...
Anyone else could post their toughts on what (if any) speed increases they had on their devices, as well as the cards brands and sizes?

4gb
mine's working fine with a 4gb transmedia card

Storage Card

I have just purchased a Sanddisk ultra ll 1.0gb storage card.
It works fine in my digital camera but when inserted into my spv m600 the device wont recognise it.
Is there a storage card limitation with the prophet and if so is there a way round it ?

I have similar problem with SD card Transcend 2 Gb x150. When I got 2 Gb TwinMOS x66 problem disappeared. I think the problem is the too high speed of card. Probably they can’t work at speed which is sufficient for Prophet.

Card problem?
Anybody else had sucess with the Transcend 2gb card x150? I was thinking of purchasing the 4gb version, at same speed, but now I'm not sure I want to waste my money.
Anybody else have a 4gig, can you name brand and speed pls?

I have used both the sandisk 1gb ultra II card and the sandisk 2 gb. Both work fine in my I-mate jamin. The ultra II is much faster, but i mostly use the 2gb card, cause I need more space. If they had a 2gb or 4 gb ultra II i would buy it also...I have also used the PNY 2 gb cards. They all work in my jasjar as well. But like i said, the ultra II works best.
You might need to re-format the card and then try it (not with the camera format option, but from the Jamin)
You can download a beta copy of pocket mechanic (good for 15 days without license) at www.antontomov.com go to forum and check pocket mechanic beta forum for latest version

Thanks eagle1
That's good news Eagle. What are the speeds of your two SD cards?
Anybody use a 4 gig non-sandisk card?

I'm using a Trandcend 150xSD 4 GB and it works great.

i am using an sandisk extreme III (150x) 1 GB and works great

Still no card showing
Thanks people for your posts and advice i have tried a few things including pocket mechanic but still have not managed to get my prophet to accept the Sandisk Ultra ll 1.0gb sd card.
If anyone comes up with a soloution or indeed has a SPV M600 with a working Sandisk Ultra ll 1.0gb please let me know.
Just off to e-mail Sandisk to see if they can help.
Thanks again for your posts.

It seems that high speed SD cards workability balanced on the edge with Prophet PDA’s. So best approach would be Try – Before – Buy. “Minor” problem would be to find store where this approach works for SD cards .

Has anyone tried A-Data 4gb 150x?
Has anyone tried A-Data 4gb 150x? I think this is the cheapest 4GB card out there, so I'm wondering if anyone has tried it on the prophet?

I have just started using a 4GB 'Topram 150x'. Seems to work OK, except can't directly save photos to the SD card. According to other posts, something to do with having more than 2GB of empty memory. However, can transfer photos from main memory to the SD card without any problems. Music and videos appear to store and play back without any problems

SD CARD NOW UP FOR SALE
Still no joy with my new sd card so decided to put it on ebay
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7612649443&ssPageName=ADME:L:LCA:UK:11
Had a word with the staff in the local pc world to let me try before i buy but no go, they said they would not give me my money back either unless the card was faulty. Not that i would buy one from there with the price they charge.
Will keep you all posted on what card i get to work with my SPV M600.

I'm confused
I'm really confused. How can it be that a particular Sandisk 150x speed works, and another one doesn't? Or one 4gb high-speed works, the other doesn't? I can't seem to find a pattern here. Its just random.

Re: I'm confused
krale said:
... I can't seem to find a pattern here. Its just random.
Click to expand...
Click to collapse
My guess is the low speed threshold for high speed SD card actually randomly higher than the normal operation for Prophet hardware. In this case two high speed SD cards which are same type of same manufacture may have randomly different low speed threshold, what is out of concerns of manufacturer. Who would cares about low speed access ability? And now we have to go through risk of buying perfectly good SD card which may not work on our Prophet devices. I hate this.

Hi,
I'm using an Extrememory 2 GB and 4 GB SD-Card. No problems with my Jam aka Magician or XDA Neo aka Prophet.
andilein

pbeaco said:
can't directly save photos to the SD card. According to other posts, something to do with having more than 2GB of empty memory. However, can transfer photos from main memory to the SD card without any problems. Music and videos appear to store and play back without any problems
Click to expand...
Click to collapse
I think the new ROMs have fixed that.

adeywatkins said:
I have just purchased a Sanddisk ultra ll 1.0gb storage card.
It works fine in my digital camera but when inserted into my spv m600 the device wont recognise it.
Is there a storage card limitation with the prophet and if so is there a way round it ?
Click to expand...
Click to collapse
Ade,
You sure say no be old ROM you dey use?

Hi again here is my SPV M600 AKA Prophet Device info
ROM VERSION 2.10.1.22 WWE
ROM DATE 2/16/06
RADIO 02.07.20
PROTCOL 413.1.03
EXT 2.10.1.107
OPERATOR VERSION 13.10.1.107

Storage CardJ
Just found this on ebay http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7611242138 works out just under £60 for adata 4gb 200x MMC card which apparently has better compatibility.

I upgraded the ROM and I can now save my photos directly to the SD card as long as the picture resolution is 640 x 480 or less. For the higher resoltion photos I have to save to main memory. Can anyone make any sense of this?
Otherwise I am having no problems with the SD card. I am not about to go and buy another one, so I will just use my workaround of saving no main memory and copying to rthe SD card when memory is low.

4GB SD memory for XDA Exec (Universal)

Hello
do you guys know if a 4 GB SD Card will work with the Universal. I saw in one of the signatures that people are using 2GB SD Cards, was wondering what is the upper limit?

I have an AData 4GB card purchased from some dodgy geezer in Hong Kong via eBay - it works perfectly. So go ahead and get yourself one

I've got transcend 4GB SD 150x works good

I've got a MyFlash 4GB card,
works perfectly

sl9 said:
I have an AData 4GB card purchased from some dodgy geezer in Hong Kong via eBay - it works perfectly. So go ahead and get yourself one
Click to expand...
Click to collapse
Me too

noname 'My Flash' 4GB 200x turbo MMCplus works too.

phsnake said:
I've got transcend 4GB SD 150x works good
Click to expand...
Click to collapse
same here.

not good
I will works fine but after you rich the maximum data with combination of software, you can encounter slow moving of any application hanging more often than usual and it will eat your battery 4x faster than normal consumption. :?

The speed of the card doesnt make much of a difference when using the it in the PPC. But you will notice the 150x SD card in a card reader for on the computer. Speeds of read and and write will be really fast, but it has no effect on PPC speeds, the PPC can only go so fast.

iv got a 150x transcend in mine working fine, well iv used it for about 4 months now, it does however have some slight issues with the camera...
before you can save images direct to the card you must have less than 2GB of space left on the card as the camera prog does not recognise anything more than 2gig, so if you try an take a pic with an empty 4gig card it will fail (unless you set images to save direct onto phone)
1 other problem i have encountered, i dont know whethere this was down to the camera, the phone or the card but, when i was away on holiday, i had around 2.5gb of audio and was using the camera a fair bit on my travells, then 1 day when i took a pic it overwrote (is that a word?) :lol: everything on my card!!! when i went into my storage space it said that the card still had 3gb taken up on card but when i went onto file explorer there would be nothing left showing on the card other than images i had taken since :roll: bit of a pain in the ass but it hasnt done me any wrong since then, still filling it with lots of audio/txt/images and no more problems (touch wood)

i had this experience with a 1GB sandisk card. I think it happens when a read or write to the SD card fails or doesn't finish [not sure here], happened twice the 1st instance I was able to use the SD card again [reformatted it with a camera, then again using Resco Explorer on the PPC] the 2nd time it happened the card was dead. Right now I am using a 1GB miniSD [in the adapter of course] which I bought for my ex-PPC [a Wizard] I plan to get a 4Gb SD card as well. If the speed of the card is only really noticeable with card readers then I'm ok with that [as I transfer songs and such via my notebook's in built card reader]. Hmm time to go SD card hunting over the weekend!!! Wonder what I'll do with the miniSD though... I have a 1Gb card in my digicam as well, maybe I can pass that off to my lil sis or something... :roll:

Ive just bought "Platinum" 4GB. It cost me 82$, here in Poland.
Universal report it have just 3,56GB but it is working as expected. Ive benchhmarked it in pocket mechanic - index:122
best reg,
Piotr

I got a Transcend 4Gb 150x SD Card [Part No.: TS4GSD150]. For around 88USD. It is reported as 3.86Gb under Resco Explorer.

I bought a MobyMemory 4Gb card from, suprise suprise, www.mobymemory.co.uk. Almost certainly rebadged from somewhere else but I though it was a good price at under £50 and works fine on my XDA Exec. They also throw in a free SD reader as some readers have trouble with 4Gb SD cards. I had to reformat the SD card under Windows XP for it to be seen by both the Exec and Win XP (as shipped, only the Exec could read the card).
Have the wiki and tomeraider on there - great for being a smartarse down the pub.

sl9 said:
I have an AData 4GB card purchased from some dodgy geezer in Hong Kong via eBay - it works perfectly. So go ahead and get yourself one
Click to expand...
Click to collapse
I've just ordered one for a total of 37 quid

Hi guys,I am new here .
I am wondering if anyone has tried the new 8GB SD card on the Universal? dose it works?
BTW,My hx4700 which is 2004's unit and it works perfectly with the 8GB CF card. so...the new HCSD card will be working too?
I am using the ADATA 4GB 150X card too,it will take at least 12seconds :shock: to boot the phone pad once I press the CALL button in device shut down mode,is that normal?
thanks,
best.
-LB

SDHC will not work on old and current devices IIRC it needs a special SDHC capable SD slot for it to work with the newer cards. Dunno when SDHC will come to mobile devices though as I fear that the trend is that manufacturer's are moving towards transflash [aka microSD] and miniSD.

my 4GB main SD card worked so well, i bought 4 more to encode movies on
now i need a better DVD ripper Wondershare pocket DVD stupid is too quirky. can't rip some DVDs, sometime frame seqences willl repeat dejavu...

bnycastro said:
SDHC will not work on old and current devices IIRC it needs a special SDHC capable SD slot for it to work with the newer cards. Dunno when SDHC will come to mobile devices though as I fear that the trend is that manufacturer's are moving towards transflash [aka microSD] and miniSD.
Click to expand...
Click to collapse
Thanks for the info bny,
that's a good news for my wallet ....

I've got a Goodram 4GB (x150) card, from Wilk S.A -Poland
works perfectly

New Issue With MiniSD

I have a hermes and there i was using a 2 gb sandisk micro sd card for some 5 month...and recently i brought a trinity and then hence im using that micro sd card with a minisd adapter in the trinity...and for last 1 week it worked flawlessly...last night all of a sudden the minisd card disappeared...no sign of storage card like that there has no card inserted...although in the about window it says expention slot in use..but in memory window no storage card installed!! and resco explorer or any other program cant detect the card...
firstly i thought my card is currupted so i inserted it (the micro sd) in my hermes and it worked there without any glitch...even then i formatted it in both fat16 and fat32 in the pc with a card reader but my trinity cant detect the card....
then i thought my mini sd adapter is broken...so i tried the memory card with the minisd adapter in the nokia 6280 and its working there without any probs....and then i tried the 64mb minisd card that came with nokia 6280 in the trinity and WTF my trinity can detect this card and also working with it..that means the card slot of the trinity is ok...
after all of this experiment then i flashed 3 types of rom in the trinity to see if it can detect the card... one is the lsvw edition with gps...(that i was using for a week before this thing happened) then a original htc rom and the dopod australia rom that my set had when i purched it...but all this three rom has same result...can detect 64 mb card (which is nokia oem minisd) but cant detect the 2gb sacdisk (wich is a micro sd to mini sd converted)...
now do anyone have similar kind of problem...or this is a new issue...i dont have any other card to try in this moment.... just ordered a oem 4gb minisd...will get it in next week...
and finally to let you know that my micro sd card is perfectlly working both in hermes and in nokia with the mini sd adapter and i also did a rough test on it with a card reader in computer with the mini sd converted inserted...and no sign of a probs there...
any comment or suggestion would be helpfull...
and a final thing as i brought it in plan from 3 australuia..and im still in that 14 day period...do you thing if i go to a 3 store and told them the setuation will they replace my handset..??i have the dopod australia rom installed so i dont hink they will be able to detect that i had flased other roms...??
Sajib

it does not support anything higher than a 1gb memory card, i have had this problem to with a 2gb card, i have now put a 1gb card and it see's it fine!

Malkav said:
it does not support anything higher than a 1gb memory card, i have had this problem to with a 2gb card, i have now put a 1gb card and it see's it fine!
Click to expand...
Click to collapse
Sorry but I disagree. I have been using a standard Sandisk 2GB miniSD for 4 months now without any problem.

i got told it will only support a maximum of a 1gb mini sd?????

Using a 2 GB SanDisk without problems.

I've been using a standard (non SDHC) 4 gb card for 3 months with no major problems. Never had the card 'disappear' completely - only minor file corruption like losing a picture or a ringtone (but it always comes back on soft reset). Only have those types of issues occasionally anyway (like maybe 1 a week - device should be soft reset that often anyway!) Overall, very pleased with the performance of this device.

G'day,
Perhaps you could try formatting the card in the trinity using an OEM tool. My card (1GB Sandisk miniSD) "disappeared" a few weeks ago after using it OK for a month. I used a card reader in my PC to back it up then formatted it using Spb Pocket Plus in the trinity. I was then able to restore the data from the PC using activesync. Worked OK for me and no problems since.
Good luck.

minisd card problem
Dear Customer,
Thanks for your email regarding your P3600.? The issue you describe is something we are aware of and are currently in the process of rectifying.? It seems to be linked in some way to the latest updates to Windows Mobile 5 and as such we have also enlisted Microsoft's help in solving this.? It seems that the device is accessing the memory while it is in an idle state.
We are currently still investigating the matter with the help of our engineers in Taiwan, but in the meantime, to workaround the problem you can set the device to turn itself off after 1 minute in the power options, then let the device turn itself off instead of pressing the power button.
Once we have fixed the problem, I have no doubt it will be released in some sort of ROM update in the near future.
Thank you for your patience in this matter.

Hong Kong's D810 now officially shipped with a 2G miniSD as a gift

Ok,
I also asked HTC europe supoport about the specifications and got an answer per eMail that the P3600 supports mini SD up to 2GB and does NOT support 'ultra' or SD HC-versions.
So perhaps give it a try with a regular (and unfortunately slower) 2GB SD??
S.

A strange developement that i thought better to be share...firstly my 2 gb sandisk micro sd card (converted to mini sd with a adapter) still doesnt work after updating to latest dopod rom and to latest aku 3.3.1 htc rom...setting>memory still says not installed...but if i boot into bootloaded mode and use the trinming.nbh trick to flash my trinity with a nbh file..it does detect the sd card instantly and start flashing without any problem..so it also prove that the sd card slot is ok and it also detect the card in hardware level but it cant recognise in software part...its strange as the same card worked for the 1st 1 week after i brought the d810..!!!!
now does anyone one have more ideas??
and hopefully im getting my topram 4gb card in a days or 2 to test more furthur...in this mean time im really frustated for not able to use tomtom as no space to keep the maps....

sajib said:
A strange developement that i thought better to be share...firstly my 2 gb sandisk micro sd card (converted to mini sd with a adapter) still doesnt work after updating to latest dopod rom and to latest aku 3.3.1 htc rom...setting>memory still says not installed...but if i boot into bootloaded mode and use the trinming.nbh trick to flash my trinity with a nbh file..it does detect the sd card instantly and start flashing without any problem..so it also prove that the sd card slot is ok and it also detect the card in hardware level but it cant recognise in software part...its strange as the same card worked for the 1st 1 week after i brought the d810..!!!!
now does anyone one have more ideas??
and hopefully im getting my topram 4gb card in a days or 2 to test more furthur...in this mean time im really frustated for not able to use tomtom as no space to keep the maps....
Click to expand...
Click to collapse
Have you reformatted the card using a card reader with XP?
Now...I have maintained many times that my TopRam 4gb works just fine in my Trinity while many others have complained about problems with cards from many different manufacturers, both 2gb and 4gb cards. It may not be just a coincidence that mine has no problems. I always do the WM5 performance tweaks on my devices and yesterday I saw in the Hermes Wiki a reference to a known problem with the storage buffer settings. The fix that it recommends is one of the settings that I always change with my performance tweaks. It cetainly won't hurt, and for all of those people that are constantly complaining about their miniSD cards, maybe you should try it! The other performance tweaks might also help.
Quote from the Hermes Wiki:
Missing/Corrupt SD Card?
This mod seems to make the SD Card more stable, and avoids the problems encountered by some members where the SD Card either disappears or the card 'loses' information until it's ejected then re-inserted.
There are two issues to this. One is that SD Cards that are made in Taiwan seem to have more problems than Japan made cards. Kingston SD Cards are made in Japan, so, they are a relatively good bet. Sandisk and Crucial are made in Taiwan, so seems to have more problems. The second issue is the registry; the default values are just too low.
See:
http://forum.xda-developers.com/showthread.php?t=294324
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196

Yeap i tried that performance tweak in both way increased it to 8196 and also decreased it to 1500 nothing helped..
and sure i did format it with two diffrent card reader and also using some other tools like panasonic sd card formater or hp formatting tools...and just a hour ago i tried pertitioning it into two part 1gb/1gb hermes do recognise the card so do the pc in 2 partition mode but trinity cant detect it even now...
and finally as i told you my trinity detect the 64 mb nokia oem minisd card so i also tried partitioning my micro sd into a single 64 partition to find out if it has something to do with the capacity but same result there...
so im bit of confused here...really confused..
Matterhorn said:
Have you reformatted the card using a card reader with XP?
Now...I have maintained many times that my TopRam 4gb works just fine in my Trinity while many others have complained about problems with cards from many different manufacturers, both 2gb and 4gb cards. It may not be just a coincidence that mine has no problems. I always do the WM5 performance tweaks on my devices and yesterday I saw in the Hermes Wiki a reference to a known problem with the storage buffer settings. The fix that it recommends is one of the settings that I always change with my performance tweaks. It cetainly won't hurt, and for all of those people that are constantly complaining about their miniSD cards, maybe you should try it! The other performance tweaks might also help.
Quote from the Hermes Wiki:
Missing/Corrupt SD Card?
This mod seems to make the SD Card more stable, and avoids the problems encountered by some members where the SD Card either disappears or the card 'loses' information until it's ejected then re-inserted.
There are two issues to this. One is that SD Cards that are made in Taiwan seem to have more problems than Japan made cards. Kingston SD Cards are made in Japan, so, they are a relatively good bet. Sandisk and Crucial are made in Taiwan, so seems to have more problems. The second issue is the registry; the default values are just too low.
See:
http://forum.xda-developers.com/showthread.php?t=294324
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196
Click to expand...
Click to collapse

sajib said:
Yeap i tried that performance tweak in both way increased it to 8196 and also decreased it to 1500 nothing helped..
and sure i did format it with two diffrent card reader and also using some other tools like panasonic sd card formater or hp formatting tools...and just a hour ago i tried pertitioning it into two part 1gb/1gb hermes do recognise the card so do the pc in 2 partition mode but trinity cant detect it even now...
and finally as i told you my trinity detect the 64 mb nokia oem minisd card so i also tried partitioning my micro sd into a single 64 partition to find out if it has something to do with the capacity but same result there...
so im bit of confused here...really confused..
Click to expand...
Click to collapse
It sounds like you've really tried everything. I don't know what else to say , maybe another card will give better luck?

Ok now there i have just got my 4gb topram card and the best of all is my trinity can detect it and show the size as 3970 mb!!!! hey..at last....even though i didnt test it throughly yet (that will be done in next couple of hour) but im happy that the problem i mentioned earlier with 2 gb micro sd card now seems was related to the mini sd card converter or with the card itself atlist not have to deal with the phone warrenty and stuff like that...
thanks to all who tried to help me out..

sajib said:
Ok now there i have just got my 4gb topram card and the best of all is my trinity can detect it and show the size as 3970 mb!!!! hey..at last....even though i didnt test it throughly yet (that will be done in next couple of hour) but im happy that the problem i mentioned earlier with 2 gb micro sd card now seems was related to the mini sd card converter or with the card itself atlist not have to deal with the phone warrenty and stuff like that...
thanks to all who tried to help me out..
Click to expand...
Click to collapse
Please let me know if it works fine after a week or so. I'm interested in getting one...
Thanks,

Matterhorn said:
Have you reformatted the card using a card reader with XP?
Now...I have maintained many times that my TopRam 4gb works just fine in my Trinity while many others have complained about problems with cards from many different manufacturers, both 2gb and 4gb cards. It may not be just a coincidence that mine has no problems. I always do the WM5 performance tweaks on my devices and yesterday I saw in the Hermes Wiki a reference to a known problem with the storage buffer settings. The fix that it recommends is one of the settings that I always change with my performance tweaks. It cetainly won't hurt, and for all of those people that are constantly complaining about their miniSD cards, maybe you should try it! The other performance tweaks might also help.
Quote from the Hermes Wiki:
Missing/Corrupt SD Card?
This mod seems to make the SD Card more stable, and avoids the problems encountered by some members where the SD Card either disappears or the card 'loses' information until it's ejected then re-inserted.
There are two issues to this. One is that SD Cards that are made in Taiwan seem to have more problems than Japan made cards. Kingston SD Cards are made in Japan, so, they are a relatively good bet. Sandisk and Crucial are made in Taiwan, so seems to have more problems. The second issue is the registry; the default values are just too low.
See:
http://forum.xda-developers.com/showthread.php?t=294324
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196
Click to expand...
Click to collapse
Hi to all!
i have just bought a htc p3600, and when i put my 2gb miniSD card in it, he don't recognise it!!!! this card has working perfectly in my "old" QTEK 9100 (last 9month)
i have also verify that in my QTEK 9100 the regystri was:
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:1500[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:1500
i put this values in HTC P3600.... still not regonized. i try whith 8196 but nothing apenned too.....
in anytime, if i put my miniSD in the QTEK 9100, he work's whith no problem....
i already read all this tread, but i can't find the solution to this problem.... maybe i search badly, but can anyone indicate me , if exist, the rigth method to format/resolve this problem.... please help....

hi to all again...
when i'm to format my miniSD in my PC, i can chose the cluster size.... in the tip above, it was referring to change two value to 8196.... but in my PC the cluster size is 8192..... i try whith both value, but still can't get my miniSD recognized....

Matterhorn said:
Have you reformatted the card using a card reader with XP?
Now...I have maintained many times that my TopRam 4gb works just fine in my Trinity while many others have complained about problems with cards from many different manufacturers, both 2gb and 4gb cards. It may not be just a coincidence that mine has no problems. I always do the WM5 performance tweaks on my devices and yesterday I saw in the Hermes Wiki a reference to a known problem with the storage buffer settings. The fix that it recommends is one of the settings that I always change with my performance tweaks. It cetainly won't hurt, and for all of those people that are constantly complaining about their miniSD cards, maybe you should try it! The other performance tweaks might also help.
Quote from the Hermes Wiki:
Missing/Corrupt SD Card?
This mod seems to make the SD Card more stable, and avoids the problems encountered by some members where the SD Card either disappears or the card 'loses' information until it's ejected then re-inserted.
There are two issues to this. One is that SD Cards that are made in Taiwan seem to have more problems than Japan made cards. Kingston SD Cards are made in Japan, so, they are a relatively good bet. Sandisk and Crucial are made in Taiwan, so seems to have more problems. The second issue is the registry; the default values are just too low.
See:
http://forum.xda-developers.com/showthread.php?t=294324
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196
Click to expand...
Click to collapse
hi, pls cd u link the other tweaks u reccommend?

Ordered a Sandisk 2GB Ultra Mini SD card earlier today..
After reading this perhaps a 1GB would've been a safer bet... Still, worth a try. Would prefer to have the complete EU maps on one card.