mapopolis drivers for xda2i - MDA II, XDA II, 2060 General

hi guys
i have a sd 501 sd gps system but i lost my initial disk. had it working sucesfully on my xda 2s but i broke this and replaced it with a xda21 but i can find my disk to load the drivers on. does anyone out there have the drivers or suggest where i can get the drivers.
thanks in advance.
kevin

http://www.easydevices.co.uk/sp/searchbox13/main.asp?sitepages=Downloads

Related

XDARit problem reading/writing SD card

I've saved my ROM to a SD card, but the XDARit program will not read it, I get an error: Did not find correct flash signature, aborting! - and it does not matter if I read .nb1 files or .img files.
When I try to write an image (.nbf file) to the card, it finishes in about 1 second, saying it wrote 65026 blocks ??? I try to write only the Windows CE part, since my boot loader is at 5.15.
Any ideas - I tried reading/writing on different PC's with different card readers, but always get the same error/behaviour. So maybe it's me?
Hope some of you gous can help.
Best regards,
Allan
If it's bootloader 5.17, read the instructions regarding 5.17 on the site...
I have Boot loader 5.15 - ie. the good old one
As I mentioned, I'm running boot loader 5.15, so all the nice tricks applying to 5.17 are not relevant, sorry. Interesting reading, though.
Any ideas why I can't read or write the SD card?
Best regards,
Allan
Oops, sorry for not reading your post completely..
No clue. I've been using XDArit extensively over the past few days. And while it's not a miracle of UI design, it does work for me. Using NT/2000/XP ? (It doesn't work on 95/98/ME)
I'm running Windows XP on both the PC's I've been testing with.
Any other clues?
Best regards,
Allan
Hi !
I have this problem also.
Thx for any helps.
I had the same problem, the SD card was locked as read only... :shock:
Sorry, the SD card is not read-only. But even if it was, shouldn't I be able to read the image from it anyway? I can't read and I can't write - hmmm.
Best ragards,
Allan
Hi all !
I have solution this problem.
Try anoder type of card in XDArit. For example try the SM card. Because the XDArit not recognize corretly the card type.
Sorry my poor english.
Best regards,
Sebi
In first: Sorry for my english In Second...
It's happen then you use any USB Hub in any type of it. For example if you cardreader don't connect directly to USB port in back of you case, but to any another connector (USB2 on motherboard for example or in you mouse) Try connecting cardreader directly to usb in youe case (motherboard) and all should be OK!
One more thing!
You should use USB 1.1 or 1.0 CardReader, only. Not USB 2.0. This program don't work with this protocol.
How about Usb travel Flash ?
I'm using a 6in1 travel flash. I be able to read up the SD Image backup created by My MDA yesterday using XDArit Read option.
I use XDArit to create a new image and restored back again, it shows that the files are still the original one that created by the MDA not XDArit.
It seems that XDArit not be able to write to the SD Card which was written once.
Dear LeAlex, please advice.
Thanks. There are many users waiting to upgrade theirs' ROM.
I'm using WinXP Home SP1 with 5.1.2600 drivers ? any problem
I forget to mention that I'm using WinXP Home edition with SP1.
The usb driver info for this travel flash is 5.1.2600.
Microsoft so said that USB2.0 is included in this SP1.
Any solution ?
dont think so that xdarit cant run on usb 2.0, i use xdarit on billionton usb 2.0, must change the usb mass storage driver to billionton driver cd, xdarit work fine, but when i try this methode in xp mechine it doesnt work coz billionton dont make special driver for xp
Hi fastblazer !
Use this link to dowload the Xdarit.
This version is work fine.
http://givemebeer.com:8080/warez/XDA/xdarit.exe
Sebi
XDarit problems
Hi
Solution from TandyJames work fine, solve all problem in this discussion.(N in 1 readers, ...). Need recompile sources - download not work ?
R.
Anonymous said:
Sorry, the SD card is not read-only. But even if it was, shouldn't I be able to read the image from it anyway? I can't read and I can't write - hmmm.
Best ragards,
Allan
Click to expand...
Click to collapse
Could you try to reformat it?
because I formatted my sd card with my ipaq 3850 then sdcard reader cant write it becaouse of readonly. So if you format it on xda, I think you can write it
Regards
I had the problems that you guys did...
and I ended up using the old version that you can find in some of these threads and that solved my problem...
T

Sandisk Wifi 256 Card Set-Up Exe needed...

Hi all, i've got my Sandisk Wifi SD 256 card through but i do not have the set-up.exe program to install the program & drivers to my Magician / MDA Compact. I've tried the online Sandisk site but their Easy Installation is not working either!
Help! LOL
Any assistance is greatfully received.
I have downloaded the driver zip file that is floating around on here.
Many thanks all,
P.
p.s. this site has been a wealth of knowledge and info for me.
You can also try the socket drivers, here ya go http://www.socketcom.com/support/support_wlan.asp?Type=SDIO
Thanks Pieps, i located the latest Set-up .exe and drivers file which i seems to be working a treat. everything is picked up perfectly including the storage. 8)

Spectec WiFi Card Drivers

Hello there,
I've been a fool and lost my Spectec WiFi drivers... can someone point me in the right direction to download them again. I cant find the drivers on the Spectec Site.
I'm trying to sell my MDAc so i need to Hard Reset and install the Drivers again.. i misplaced the TINY CD that came with them
Can anyone help ? :?
You can find the driver in spectec website http://www.spectec.com.tw/, in Service Section and Download List For SD-Devices. Model No. for Wifi card is SDW-820. I have downloaded both manual and newest driver there.
This is the link to the download section
http://download.spectec.com.tw/download.asp
You can also use the E300 drivers from here
http://forum.xda-developers.com/viewtopic.php?t=27069&highlight=spectec+e300
Oh dear, what a spaz i am.
I was using Firefox to view the spectec page, on which i dont have flash enabled. So i couldn't see the menu.
What an idiot.
Thankyou folks :?
And to continue, where to download drivers for Sandisk 256 MB + WiFi SD Card? I got the CD but i need the latest drivers.
And by the way, is there any monitor software which works with that card? and BTW#2, does anyone know which chipset does have that Card?
Thanx
Dakky said:
And to continue, where to download drivers for Sandisk 256 MB + WiFi SD Card? I got the CD but i need the latest drivers.
And by the way, is there any monitor software which works with that card? and BTW#2, does anyone know which chipset does have that Card?
Thanx
Click to expand...
Click to collapse
here u go
http://www.sandisk.com/retail/drivers-sdwsdb-256.asp

WIFI Help Needed (Spectec SDW-821)

--------------------------------------------------------------------------------
Hi Folks,
I have just bought the Spectec SDW-821 for my iMATE Jam - but for the life of me I cannot get it to work.
The current drivers from the Spectec website have been downloaded and the CAB File copied to the storage card and executed from there.
Under: - Setttings>Network Cards - I can see that the 'WLAN-11g Adapter' is there.
I then did a soft reset & installed the card - but it is not even being recognised as being plugged in.
Under: - Settings>About - it is showing the expansion slot as not being in use.
What am I missing here?
Thanks for all your help.
chasper7 said:
--------------------------------------------------------------------------------
Hi Folks,
I have just bought the Spectec SDW-821 for my iMATE Jam - but for the life of me I cannot get it to work.
The current drivers from the Spectec website have been downloaded and the CAB File copied to the storage card and executed from there.
Under: - Setttings>Network Cards - I can see that the 'WLAN-11g Adapter' is there.
I then did a soft reset & installed the card - but it is not even being recognised as being plugged in.
Under: - Settings>About - it is showing the expansion slot as not being in use.
What am I missing here?
Thanks for all your help.
Click to expand...
Click to collapse
It is strange. I have the same card and everything works perfect. Are you sure that your card is 821 and not 820/822?
hey,
copy the cab file to the main memory n install it there. i had to do it a couple of times before i got my card to work properly..
alexeyGE said:
It is strange. I have the same card and everything works perfect. Are you sure that your card is 821 and not 820/822?
Click to expand...
Click to collapse
Yes - I just double checked & I am sure that it is the SDW-821
lanuk79 said:
hey,
copy the cab file to the main memory n install it there. i had to do it a couple of times before i got my card to work properly..
Click to expand...
Click to collapse
okay - Will try this out tonight & see what happens...
I am starting to think that the card is no good... but I need to find someone else who has a jam (or similar) to try it out on their machine...
Having the same problem
The card is OK, I am trying to upgrade to a new rom version as in my previous one 1.06 it worked fine...
Y
Try this driver (wm2003se anyway). It is the previous IPN2128.dll
http://www.planex.co.jp/support/driver/bwave/gw-sd11p/gw-sd11p_d124u105.exe
Works very wel with my PDA (acer n30 and Wm2003se)
All the other drivers (v1.25 and up) were crap.
ps: also added the E400 version of the installation. Differense are 2 registry keys
in HKLM\Comm\IPN21281\Parms
BlockSize=0x00000032
MaxBlockCount=0x00000000
Hope it helps.
did u manage to get ur card to work?

Software prob after SDHC patch!

Hi
Managed to get my 8gb card running (cheers for files) but my Nav n Go Igo8 wont run now, have put tomtom 7 on there but like Igo8, got used to it and the camera warnings
have uninstalled reinstalled, no luck
Any ideas?
Sorted it!
Do u want to tell me how u sorted it ?
tnx DeCo
Cmon guys helmp me out.
I used iGo 8 before on my 1 Gb card but since i install sdhc patch igo dosen't work.
When i uninstall it works.
I wanna use my 4 gb card ...
plz help
On their website it can be read:
"* Important! Please, be advised that the software runs only on the original SD memory card. "
Hope this could help you in some way finding the problem.
Regards!

Categories

Resources