Database Users

::TomTom save problems::

Can anyone help me????
I have installed tomtom6 it all works fine apart from not remembering my home location and fav's.
Does anyone know what file this data is kept in...maybe its corrupt and needs replacing. Maybe you have had the same problem...any help would be cool
thanks.
oh yeh I have reinstalled 4 times same problem
M700 and installed on a 2gb card.

Is it 6.02?
I had that issue, then 6.03 fixed it.

Nelkz said:
Can anyone help me????
I have installed tomtom6 it all works fine apart from not remembering my home location and fav's.
Does anyone know what file this data is kept in...maybe its corrupt and needs replacing. Maybe you have had the same problem...any help would be cool
thanks.
oh yeh I have reinstalled 4 times same problem
M700 and installed on a 2gb card.
Click to expand...
Click to collapse
1. Make sure your card is not locked by the "lock" switch (like on sd cards)
2. Put your card in card reader on your PC and make sure that your MapSettings.cfg is NOT "read only" that should work and it is nothing to do wit TT version.
3. If #2 fails than with your card in your card reader on your PC select all the files, rightclick to properties and than select "read only" to make all files read only and click apply. Than do the same again but deselect read only this time and click apply. That should work. Don't wory about any system files because thaey will not change status.
Hope this helps

eureka !!!!
it works....the.cfg file was locked..
thanks guys and a very useful tip for all !!!

2gb sandisk micro, limited file size?

Hey guys, i have a problem...
there is no one, who can help me in german boards, so i hope you can help me.
I wanted to install the german version of wikipedia on my hermes (980 mb)
I tryed to put the file via activesync on my sd card, there the error (by 50%) that the file is in use... that cant be true, cause there is no programm witch is using the file...
When i try to put the file on the card via cardreader, there is the error "the sector cant be find" (bad translation )
the funny thing is:
When i place 1.5 gb music on the card, it works... but with a 950 mb file it doent work... is there any file-size-limit or something?
I formated the card with the rescon fileexplorer, because when i format it with windows, the card only shows the space of 1 gb...
Do you have any suggestions what to do?

ive seen certain card readers than can only read SD bassed media up to 1GB in size.
anythign bigger gives odd results... (often warning the card needs a format)
i'd try a diff card reader, or beter still use w5torage and keep the card in the hermes...
(my card read i had problems with was an Icy Box variant)

i dont know if this would help but if you have vista you can see your card as an external USB drive... i have put 1.8G files on my card and taken them off with no issue i have a 2G sandisk

thanks for answering!
@acuum,
what do you mean with "w5torage"?
Is this an other programm like acticesync?
I tryed everything... transfer the file via wlan... and so on...
@austinsnyc,
no, i don't have vista i dont like it
any other suggestions ?

breytex said:
thanks for answering!
@acuum,
what do you mean with "w5torage"?
Is this an other programm like acticesync?
I tryed everything... transfer the file via wlan... and so on...
@austinsnyc,
no, i don't have vista i dont like it
any other suggestions ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=273748
Mike

okay, i will try it

I doesnt work...
Because, to make it work, i have to disable the usb advanced function...
but when i want to start "pogram > connection > usb to pc" the app opens and closes after a second...
Do anyone have an other suggestion for my mainproblem?
or a suggestion for my problem with the wm5s?
btw: i am using wm6, but in the board, there are people, who are using wm6 too, and they can use the wm5s propaly

noone can help me ?
I tryed the plugin winCE for the windows totalcommander...
35%, and the upload crashed

worked ok for me, on latest Elf, and worked on a Dutty rom i used...
one thing. If you have previosuly made any bluetooth GPS com ports you can't then disable the USB function. (no idea why this is....)
go to bluetooth and delete ANY com ports.
then go back to disable the advanced USB function. it should now be changable.
then try WM5torage
(sorry i typo'd in my previous post... (forgot the T)

Format type
Hi,
I've had problem too copying big files to my sd. I had LVSW 19.05. I imagine that my problems was one of this 2 choice:
- issue with the LVSW release ... I've tried black and all goes without problems;
- but first I've reformatted my microsd with 2 copy of fat (normal behavior in hd, not so normal in sd cards) - I've used Pocket Mechanic.
One of this 2 operations had resolved my issue ...
Don't know if useful ... but ...
bye

okay, thanks at all, the tool "card export" worked for me with the safemode tool together
thanks again!

wm5storage in WM6

I am using wm5storage v1.75 and every time with out fail if i try to copy a file over 3 or 4 MB it failes i even tried to disable the advanced network functionality in settings but it still did not work. i read that an older version works better but i can't fine an older version anywhere. can someone post it.thanks

Hi,
Try here: http://forum.xda-developers.com/showpost.php?p=1033294&postcount=21
Regards,
Silviu

Yes, 1.73 is the one that I use without any issue. Unlike 1.75, it will not stop recognising the USB disk midway through the transfer.

thanks for the link
UPDATE: i just tried the program and it works great but when i get done using it and deactivate it I can no longer see my mini-sd card. anyone know a fix for that

irus said:
thanks for the link
UPDATE: i just tried the program and it works great but when i get done using it and deactivate it I can no longer see my mini-sd card. anyone know a fix for that
Click to expand...
Click to collapse
I'm afraid that I seem to recall that v1.73 fried an SD card of mine - I deactivated without first stopping the drive on the PC. When I reformatted the SD card in a card reader, it was only 1Gb (previously 2GB). Was never quite sure the first time if it was WM5torage or a duff card.
Then it happened a second time with a different card. The card wasn't even a cheap import - it was a corsair. If I remember rightly, there is a Linux tool to repartition the card and I seem to recall Corsair were going to create one too(check their forums). [Have just checked the xda-dev archive and my origianl post was here http://forum.xda-developers.com/archive/index.php/t-305615.html
All I can say is, I hope it isn't that. Can you see the SD card in a card reader? Can you see it in Start\System\Memory?

i did a soft reset and it came back

could this make sdhc work

could this make sdhc work?

Did you try it on your BA ?

rickwyatt said:
could this make sdhc work?
Click to expand...
Click to collapse
Maybe. Where is the associated drivers? It will take someone with a sdhc card to try it.

Doesn't work, sorry.
Next!!!!!!
lol

Doesn't work, sorry.

cant make copy dll files
dear experts,
i have went thru most of your threads but to no avail.
i need help. i have followed the instructions exactly
http://forum.xda-developers.com/showthread.php?t=344338
however, i am always stuck when copying sdbus.dll and sdmemory.dll into device windows folder
it shows access denied.
i can activate sd cab and cert cab however. it doesnt show results after re-boot
my phone dopod 818 pro wm5
card is sandisk ultra2 SDHC 8 GB
pls help
wis

thowinson2 said:
dear experts,
i have went thru most of your threads but to no avail.
i need help. i have followed the instructions exactly
http://forum.xda-developers.com/showthread.php?t=344338
however, i am always stuck when copying sdbus.dll and sdmemory.dll into device windows folder
it shows access denied.
i can activate sd cab and cert cab however. it doesnt show results after re-boot
my phone dopod 818 pro wm5
card is sandisk ultra2 SDHC 8 GB
pls help
wis
Click to expand...
Click to collapse
Read that thread that you quoted! It does not work for the BA. Congrats, you just earned an opportunity to reflash your phone (if you want your SD card slot working again )

SD card is full or missing when in "Documents" tab

When I'm on "Documents" tab it says - "SD card is full or missing"
Any way around it ?

Come on ... nobody has this problem ?!!!

I had that problem too and I wish I could give you a way to fix it, but I had to perform a hard reset after WMWifiRouter screwed my WiFi up. Your post reminded me about the problem with the documents tab and I just checked it... turns out the hard reset also fixed this issue for me.
I'll let you know if it comes back and we can work out a fix that doesn't involve resetting everything on the phone.

I actually performed hard reset (because of a different issue). Unfortunately it did not fix Documents tab problem

are you using a ram disk at all? that is known to mess with the docs tab.

samsamuel said:
are you using a ram disk at all? that is known to mess with the docs tab.
Click to expand...
Click to collapse
I do not even know what is RAM disk on HD2. No, I do not use special RAM disk apps and my ROM is US T-Mobile HD2 stock ROM

bogdatov said:
I do not even know what is RAM disk on HD2. No, I do not use special RAM disk apps and my ROM is US T-Mobile HD2 stock ROM
Click to expand...
Click to collapse
hmm no clue then, sorry. Think if it were me i'd try copy off all the files and folders onto the pc then format the sd card and copy everything back, just to see.

Did you remove the original SD card that came with it? Or, replace it with another one? I know it's in the manual that once you do it, the SD card may not work anymore, or something like that. Maybe that's the cause, I'm just guessing since I don't have this kind of problem.

microSD card came with T-Mobile Hd2 (US version) already inserted. Did not touch it

I have this problem too with my Touch HD.
I can't read my documents. It says: "SD card is full or missing".
Any help. Please...

I've fixed this problem
I had this problem too
I've fixed this problem thus
I backed up all info the storage Card and I made a complete format the storage card complete under windows, after I copied all info into storage card again, and this operation fixed this problem
Dmonium
Excuse :me if my english is so bad

dmonium said:
I backed up all info the storage Card and I made a complete format the storage card complete under windows, after I copied all info into storage card again, and this operation fixed this problem
Click to expand...
Click to collapse
Did exactly same thing but it did not fix it for me

Format worked for me, although I'm pretty sure the SD card was fine, and was gonna compare the pre-format files to post-format and see if I accidentally deleted anything that would cause this. Was in a hurry though, and never ended up comparing.
Formatted(full) SD card on PC, then put in phone and formatted there to get the stock files back on. Then copied everything else over (TF movies, and my downloads, etc..). Worked fine after that.

Hi
I had the same problem and quicikly solved this issue:
Go to: \Carte de stockage or Storage card\Application Data\HTC\databases\DocExp
And delete 2 files: postlist.DB & value.DB
It worked for me, hope the same for you

Installing a network plugin caused the issue on mine, when I unistalled it worked again

mdean11 said:
Installing a network plugin caused the issue on mine, when I unistalled it worked again
Click to expand...
Click to collapse
mdean, do you happen to have the name or the cab handy, so I can take a peek at it for a possible connection to the cause? Thanks!

I tried 3 different ones, all caused the problem - generic network plugin, htc network plugin, and schnaps network plugin

SD Card is full or Missing - SOLVED
1. Delete the folder - Storage card\Application Data
2. Tab again the document tab - wait re-loading until finish searching all documents
3. Successful!

thanks dude i was having the same problem, when i enabled shared network folder in touch tool, it stop working but i went back and disabled it and now working again.

Glad you all figured it out... I had this problem 3 weeks ago and immediately after enabling and setting up the network plugin with Touch Tools 1.4. Luckily, I didn't have to look for the cause since the last thing I did was install & use the network plugin!
So, for future reference.........
Also, your facebook pictures in htc album's facebook tab will stop showing up if you manually assign a "CacheSize" value other than 0 to HKLM\System\StorageManager\FATFS.
Be advised!