Hi Guys,
I need help my XDA1 (Wallaby) won't sync to my PC ActiveSync won't work too how can I solve this problem? :roll:
I've got this Error Message several times, when the device was stuck with GSM Error. Active Sync won't recognise each other. Is your Wallaby in good condition? GSM ok?
Stefan
LumpiStefan said:
I've got this Error Message several times, when the device was stuck with GSM Error. Active Sync won't recognise each other. Is your Wallaby in good condition? GSM ok?
Stefan
Click to expand...
Click to collapse
Hi LumpiStefan finally already solve the case/problem for this one no other than to HR your Wallaby.
Now, it's normal and Sync is working whew! i thought it's already broken hehe..
yamskie
yamskie said:
LumpiStefan said:
I've got this Error Message several times, when the device was stuck with GSM Error. Active Sync won't recognise each other. Is your Wallaby in good condition? GSM ok?
Stefan
Click to expand...
Click to collapse
HI,
My mda gsm is not ok. It shows gsm error. what should I do?
Thanks
Click to expand...
Click to collapse
wais said:
My mda gsm is not ok. It shows gsm error. what should I do?
Thanks
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
Related
Hi!
I have been killed my SX56 again :twisted:
I have 5.22 bootloader and try to downgrade to 5.15 through XDArit.
I see start Pocket PC 2002 screen only with info:
G1.3.3
RA.33.02
R.30.07
I can NOT get in bootloader menu to load OS from SD card.
I press power on/off button and soft reset but SX56 only reboots and I see Pocket PC 2002 screen.
Help!
have you reset the battery button?
hoanghon said:
have you reset the battery button?
Click to expand...
Click to collapse
Yes, 2-3 times but no changes...
My SX56 is dead now and I can not get in bootloader to reflash it using SD-Card method.
I am sure that power button is working properly, I think (and if I am right it is terrible) there is software problem. :?
Have you tried the fixbootloader from the XDA-Tools?
Stefan
LumpiStefan said:
Have you tried the fixbootloader from the XDA-Tools?
Stefan
Click to expand...
Click to collapse
How can I do 'fixbootloader' if I can NOT make ActiveSync connection? :?
Help! My SX56 is dead still! :?
soho said:
Help! My SX56 is dead still! :?
Click to expand...
Click to collapse
Help-Help!
Any ideas? :?
I don't be able to register my spv m3100 unlocked with my pc. The phone don't recognized the pc. How can solve my problem ?
I've the imate rom with bootloader 1.04 Thanlks
deika95 said:
I don't be able to register my spv m3100 unlocked with my pc. The phone don't recognized the pc. How can solve my problem ?
I've the imate rom with bootloader 1.04 Thanlks
Click to expand...
Click to collapse
How did you try to "register" (what did you mean by that? Just seeing it and pairing? Or, discovering services?)?
Menneisyys said:
How did you try to "register" (what did you mean by that? Just seeing it and pairing? Or, discovering services?)?
Click to expand...
Click to collapse
Excuse me for my bad english. I don't be able to pairing with my pc. Thanks
I have a problem with my pocketpc (qtek 9100)
i start but he block in the DOS and he freeze and not start in windows did eny body now a boat this problem pleace help me
blerim said:
I have a problem with my pocketpc (qtek 9100)
i start but he block in the DOS and he freeze and not start in windows did eny body now a boat this problem pleace help me
Click to expand...
Click to collapse
Have you just flashed your device? It looks like it has gone wrong.
If yes Flash again to the original Rom or Wizard Love Rom.
that looks like a g3 ipl and a g4 spl. that's not normal...did you have a g4 device that you tried to flash with a g3 rom?
try this
Push the reset and them hold the camera
after the three colors com on
plug in usb
the usb light comes on you are alive
now if its a g4 then you habve to power out of it grab your manufacures 2,25 -2.xxx update and hit it make sure that your computer is not on hybernate and you screen saver is not on turn off the active sync usb conection.
if it recognizes the device it might take you 20 diferent tries but if it takes you will find your way out.
I bricked 2 from radio updates and the 2nd was a g4 i powered out with fariar 1.69. good luck now the fum begins.
If its a g3 well your in luck find the post data crash
ciao
thanks answer
but i did not flashing but he jost stop in the dos
after this i put universal rom he finished good and he sas congratulation but its same the problem
thanks for helping
blerim said:
but i did not flashing but he jost stop in the dos
after this i put universal rom he finished good and he sas congratulation but its same the problem
thanks for helping
Click to expand...
Click to collapse
If you put an HTC Universal ROM in your HTC wizard, you are screwed..
What ROM did you try to flash exactly?
qtek 9100
In my qtek 9100 I put this rom
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
blerim said:
In my qtek 9100 I put this rom
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
Click to expand...
Click to collapse
OK, that is a valid Wizard ROM
Please post ALL the steps you took untill you encountered this problem.
That way we can analyse what has happend.
Is your phone CID and IMEI unlocked?
What method did you use for unlocking?
thanks for questions
the-equinoxe said:
OK, that is a valid Wizard ROM
Please post ALL the steps you took untill you encountered this problem.
That way we can analyse what has happend.
Is your phone CID and IMEI unlocked?
What method did you use for unlocking?
Click to expand...
Click to collapse
I did nothing and i dont now its a CID or IMEI unlocked
se the foto he not start in windows he block in dos
Hi
I recive SPV C500 when i power phone in display i have only Orange logo and Phone power off
I make updrate to MW6 phone alive but now i have Network problem
Please how to solve this problem if is it software problem
thanks
f6_gsm said:
Hi
I recive SPV C500 when i power phone in display i have only Orange logo and Phone power off
I make updrate to MW6 phone alive but now i have Network problem
Please how to solve this problem if is it software problem
thanks
Click to expand...
Click to collapse
can you get into bootloader?
hi
Yes i can put phone in boot mode
what can i do
thanks
f6_gsm said:
hi
Yes i can put phone in boot mode
what can i do
thanks
Click to expand...
Click to collapse
what dose it say on the screen when you go into thr bootloader
rickwyatt said:
what dose it say on the screen when you go into thr bootloader
Click to expand...
Click to collapse
IPL 1.00
SLP 1.01.0109
UI
f6_gsm said:
IPL 1.00
SLP 1.01.0109
UI
Click to expand...
Click to collapse
you need mtty.exe to flash yo ur phone you can use wm5 or wm6 go here
http://www.geocities.com/gggbitonti/typhoon.htm
Hi
I use Mtty1.42 and flash my phone with WM6 my phone power on now but don't have Network
rickwyatt said:
you need mtty.exe to flash yo ur phone you can use wm5 or wm6 go here
http://www.geocities.com/gggbitonti/typhoon.htm
Click to expand...
Click to collapse
I make all operation for http://www.geocities.com/gggbitonti/typhoon.htm
phone alive but now it have Network problem
f6_gsm said:
I make all operation for http://www.geocities.com/gggbitonti/typhoon.htm
phone alive but now it have Network problem
Click to expand...
Click to collapse
did you ever upgrade your c500 with the orange update? frist go to settings on your phone then go to about what is your radio version mine is 1337.0.42_0.03.28
rickwyatt said:
did you ever upgrade your c500 with the orange update? frist go to settings on your phone then go to about what is your radio version mine is 1337.0.42_0.03.28
Click to expand...
Click to collapse
No i no updrate phone with orange update
Windowns Mobile r 6
OS 5.2.318 (Build 15341.0.0.0)
Radio Version 1337.0.32_0.03.18
please need u contact
thanks
f6_gsm said:
No i no updrate phone with orange update
Windowns Mobile r 6
OS 5.2.318 (Build 15341.0.0.0)
Radio Version 1337.0.32_0.03.18
please need u contact
thanks
Click to expand...
Click to collapse
your going to have to go back to wm3 to get your radio upgraded
go here follow
http://www.user.cityline.ru/~ronswens/tutwm2003.html
to the letter, until you get to the part where you have to type in
format BINFS
if you get "Not allow operation" after typing
>format BINFS
then try this
>info 2 <--------- note the space between info and 2
then type in
>format BINFS
then restore this http://www1.orange.co.uk/c500patch/
this will upgrade your radio to the one i use then go here http://www.geocities.com/gggbitonti to go back to wm6
Now my phone don't connect with activesyn 4.1 when i try to install activesyn 4.50 i have error :
Error. There is problem with Windows Installer package; A DLL requiered for this install to complete could not be run. Contact your support personel or package vendor.
i have windows service pack1
f6_gsm said:
Now my phone don't connect with activesyn 4.1 when i try to install activesyn 4.50 i have error :
Error. There is problem with Windows Installer package; A DLL requiered for this install to complete could not be run. Contact your support personel or package vendor.
i have windows service pack1
Click to expand...
Click to collapse
try download activesync 4.5 again if that dont work
try uninstalling 4.1 frist reset computer then try active
sync 4.5 again did got wm3?
Hi guys,
my touchscreen seems to be broken and I wanted to restore the original spl from my polaris. Well, I connected my device to active sync and all went fine. I have used the originalspl3.13.0000.zip, but everytime I tried this it ends up with an connection error while activeSync successfully connected to the device.
Thanks for your reply
Tom
Kreon said:
Hi guys,
my touchscreen seems to be broken and I wanted to restore the original spl from my polaris. Well, I connected my device to active sync and all went fine. I have used the originalspl3.13.0000.zip, but everytime I tried this it ends up with an connection error while activeSync successfully connected to the device.
Thanks for your reply
Tom
Click to expand...
Click to collapse
Hi Try it with SD method..that sould do the trick you find here how to
Succes
Greetz from Holland
jojo464 said:
Hi Try it with SD method..that sould do the trick you find here how to
Succes
Greetz from Holland
Click to expand...
Click to collapse
thanks for your quick reply. I'll try it out this evening.
greets,
Tom