I have installed the O2_Connect_Xda_II_mini.cab from extendrom downloaded. While executing O2 connect after successful install, it prompted that "O2 connect is from O2 mini only"
How come........
Related
I am using O2 mini chinese version, and I have upgraded the ROM to 1.11.06 CHT. I just found the problem yesterday when I ask my friend to send a file to me from his IPAQ 4150 by Bluetooth. Then I ask another friend who is using IPAQ 2210 to send the file to me but also show an error message "Unable to connect to device "Pocket_PC"". Could anyone can help me about this problem? Thanks.
P.S. I can send file to all other PPC but only can receive file from O2 mini only.
i think i have a solution for you,
goto settings > connectoins> beam
select the checkbox there,
this checkbox is not only for Irda but also BT.
goodluck
Thanks for your answer, but I have tick that checkbox already. It is not only my Mini, I have tested 3 O2 mini (2 are using old rom and 1 is using new rom) and all of them have the same problem. Is there any way that I can enable the OBEX for receiving files in Mini? or any Bluetooth software can fix the problem?
Honestly, the MS BT stack is really....... :evil:
Hi there,
Problem with OBEX on MS Stack...use the file attached and after u install select the option "OBEX ON" Rest is self explanatory.U can then receive via BT from any phone.
Do not work on my iPaq. Still can't receive files. Vista (and other cell phones) says my device is unable to process that file (in translation).
Hi all,
Yesterday I was trying to set up the JasJar to serve as USB modem for my laptop. I have found a complete step by step manual on http://forum.xda-developers.com/viewtopic.php?t=37298 post. I have tried to do all steps twice to be sure that everything is OK. But after 10 attempts to establish the connection I have gave up.
My phone is in Orange network in Poland. User name and password to access the internet from PDA via GPRS is ‘idea’ and ‘idea’. The access point name is ‘internet’. Those setting works fine on my PDA and should work as parameters for the Dial-up connection on the computer as well.
While I connect to the internet on my laptop via JasJar the connection process stalls on “Registering your computer on the network”. After that after few more seconds the GPRS connection on PDA is being disconnected. Does anybody know what’s wrong?
I have installed the latest version of the firmware available on iMate site (JASJAR_WWE_13076_164_10900_wwe_ship.exe)
Best regards
Marek Suski
Hi,
had the same problem with it in the beginning.
If you followed the detailed description I can only assume this problem:
You missed to insert the APN in the Wireless Modem driver on the PDA (this piece of Software is on the PDA; I have the German version where it is called "Funkmodem").
Go to Extras | Options at the bottom left within the Wireless Modem and tick the option you see there.
Then again insert into the box "Access Point Name" the correct APN of your operator.
Then it should work.
I think you know that the modem on the PDA has first to be started and then the PDA connected with the PC, because otherwise ActiveSync would start.
Post here if it works now or if you need further help !
I actually have a different problem: I've set it up as per the guides. But when I want to start the connection it doesn't work. Here's what I do:
1. Disable USB connecctions in ActiveSync
2. start Wireless Modem on MDA Pro
3. Connect cable to MDA
4. Start the connection. It starts dialling, but after 10 seconds comes up with a 692 error code. Apparently, this means: "Error 692: There was a hardware failure in the modem (or other connecting device)."
Also, when I look in the Wireless Modem application, the little square indicating Connection activity always remains yellow. I presume that upon succesful connection it will turn green?
Any thoughts, anyone?
Hi, all.
I can't connect Qtek (neither 9000 nor 110) to Notebook via irda (win xp).
I run wmodem on Qtek as it's described in manual, and choose emulate wireless modem via irda, but windows doesn't recognise it as irda modem. It connects, but offer file transfer only.
I tried to setup modem manually on windows first - but which port should i select? It doesn't cleary mentioned in manual... In other words - who successfully connected Qtek with PC via irda, please tell me how.
Thanks.
P.s. Notebook easily recoginzes and installs Samsung mobile phone via IRDA and works perfectly. And Qtek connects as USB modem fine also.
Does anybody successfully used Qtek as GPRS modem via irda?
hi im trying to upgrade my pda2k from my 5.60.00 wwe to explode new rom ( 6.11.00 ), but when i double click on MaUpgradeUt_noID.exe it checks for version and after 10 seconds it returns "ERROR 101: CONNECTION PROBLEM".
obviusly my pda is in the craddle and it's connected via usb ( i can transfer data between pc and pda ).
any ideas?
thanxs
no one can help?
thank you
Try to put it in bootloader mode before upgrading.
Hi
i have a Problem with flashing my MDA Compact!! I install the unlock tool from this forum but the MDA give me an error message.
I reset them but after that the MDA starts but i allways musst set up again.
The T-Mobile software get install after that.
When it finished the bootloader start. (If the USB cabel is conected they show USB and the Version v1.02 if not Serial and v1.02)
I use a ROM and want to install but they show ERROR 150 or that the image isn t for your mobile device.
The PC install the USB drivers but it doesnt show in Explorer and the Mobile device center also not connect.
Now I get them start I open the Battery Case when he install the T-Mobile software after set up.
But I can t install a new ROM the orginal Win Mobile 5 update cant install he give the error 101 no connection. The Bootloader is open but no connection is establish
My operating system is Win Vista. PLEASE HELP ME!!!!!
Are you sure you have a MDA Compact I? There is no WM5 for MDA Compact (Magician), but only for MDA Compact II (Charmer)! Unfortunately, both devices look the same!!