i just took two print this is what ?
its buzz 2005 honestly but can you see the diferences ?
this is what i get with reser in landscape mode...
who knows?
its a known bug bro of wm2005(all version)
solution is not to reset the device in landscape or if you mistakenly soft reset it just set it back to portrait
anyway there is a registry settings for that .. i once posted it in the other thread ..
-toe
find something else also
the tap screen stays in landscpe so the start screen open if you tap botton left near the bue line
it must be something with the grafics only
if you manage to get to control pannel and align the screen the almost everything is working
Related
Although I tend to use my Jasjar mostly in its native landscape mode, Some programs are still written to operate only in portrait mode. So we have to switch between to two orientations. Yes, the little icon on the bottom right of the today screen will rotate the screen - from Landscape to Portrait (PDA) mode, then from Portrait to INVERTED Landscape mode, then another click to get it back the right way up. I know it is just one more click but it tends to irritate me and I am looking for a way to just switch it to and from the two modes I want.
I can map one of the buttons to the standard <Rotate Screen> option in Settings->Buttons, but that rotates only between Portrait and INVERTED Landscape modes! It will not bring the screen back the right way up.
Maybe there is a registry modification to fix that?
Or, can someone please tell me if there is some software or other way to make the screen switching work the way one would expect on the Universal?
I know SPB Pocket Plus can do it with its <Rotate Landscape Left> option but I don't need PocketPlus for anything else so it seems wasteful to have it installed just to rotate the screen.
I expected this to be a rather common problem but searching through this Universal forum, I could not find an answer or even any discussion on this issue. Am I the only one who thnks this way?
Check out phm keys. I posted a link to it on my website today.
V
Thanks V, but I can't see any link on your Web Page. Never mind, I searched and found the PHM.lu site and downloaded the msi file from there. But I am not sure if it supports WM5? When I run the msi on the desktop it goes through the motions but nothing appears on the Jasjar. Usually it tells me something is being installed and asks whether it is to go to the SD card or main memory. But nothing happens! Tried it twice. Maybe PHM Keys is not supported on WM5?
Hi!
Is it possible to always keep HTC wizard in landscape mode?
I can change it manually by tapping on screen or by HW button. But it reverts to portrait every time I close the keyboard. Since I use the keyboard 98% of time it takes forever every time the screen rotates.
Does anyone of you guru's know of any reg hack or something else that can keep landscape all the time?
Regards,
\\ aste
VJ come through with a fix (again)
http://www.howardforums.com/showthread.php?t=928836&page=1&pp=15
See the post from me (a042349) near the bottom of page one. It's a bit of a hack, but it'll work until the next soft reset.
Go to "settings" "system" tab and select screen. There is an option ot select Portrait, Right handed Landscape or left handed landscape.
Re: VJ come through with a fix (again)
a042349: tnx!
This is the soloution you described:
-----------
Start the camera application which puts the phone in landscape mode. Then use a 3rd party utility like "Close-All" or maybe even the native task manager (can't remember exactly) to "kill" the camera app. As long as you kill the camera app without using it's "x" or exiting normally, the device will stay in landscape mode. It stays this way if you open/close the keyboard. It will return to normal mode if you re-open the camera and close it normally, or soft reset the device.
-----------
I tried this on my wizard. But couldn't get it working. I've tried closing the camera app with VJOKButt, VBAR and the native task manager. It stays in landscape mode until I close the keyboard next time. IE exactly the same behavoiur as when manually changing to landscape mode in settings.
May be this is due to all these programs close the camera app to nicely? Or can it be this isn't working on the latest AKU2 ROM?
Anyone got an idéa?
// aste
aste said:
a042349: tnx!
I tried this on my wizard. But couldn't get it working. I've tried closing the camera app with VJOKButt, VBAR and the native task manager. It stays in landscape mode until I close the keyboard next time. IE exactly the same behavoiur as when manually changing to landscape mode in settings.
May be this is due to all these programs close the camera app to nicely? Or can it be this isn't working on the latest AKU2 ROM?
Anyone got an idéa?
// aste
Click to expand...
Click to collapse
Not working for me too. Maybe something with wm6? God, someone has to hack the wizard about this problem!
Thank you guys for tryin'
registry keys
I know this thread is somewhat inactive but I just got an 8125 and really wanted to figure this out. I did some poking around in the registry and some experimentation and found the registry keys that seem to do what we want.
HKLM\System\GDI\Rotation\CamAppActive - 0 is off, 1 is on. When this is 1 it keeps the screen from rotating. This seems to be why the camera workaround worked.
Set CamAppActive to 1, then go to settings/system/screen and switch the landscape lefthanded mode. Now the phone is in landscape and theres no laggy switching between portrait and landscape every time you open the keyboard ! To cancel it out just open and close the camera or soft-reset.
This could also be used to keep the screen in portrait whenever the keyboard is open....but i have no idea why anyone would want to do that.
If i knew more about messing around with the registry and programming for WM I'd try to work out some sort script to set this on startup..maybe when i get bored...
Hi. When I open the keyboard, the screen orients itself to the landscape mode. When I close the keyboard, the screen resumes portrait mode, but on the right hand side, part of the screen is covered by the background. It is the same width as the scroll bar. I can't get rid of it until I reset the device. Any thoughts as to the problem and the fix? Thanks.
umm i had that issue before, do you have a lot of programs open? sounds strange, but when ever i have a lot of stuff running, my device cant handle it, so it kind of gets frozen onto the screen until i reset...
does this problem occur ALL the time, or when u run a certain problem?
Actually, it only happens on the Today screen. If I have any program running in landscape and return to portrait before exiting to the Today screen, no problems. Just when I go to landscape in the Today screen. Very odd.
what todayscreen plugins are you running?
I think only two: Tonaya Weather to Go and cLauncher. Pbar is also running, but I don't think it is a Today Plug-in.
Curious D said:
I think only two: Tonaya Weather to Go and cLauncher. Pbar is also running, but I don't think it is a Today Plug-in.
Click to expand...
Click to collapse
I had the same problem too with cLauncher but it is no longer there after I installed SPBMobile Shell which enable me to put cLauncher into one of its tabs buttons...
Why don't you try disabling cLauncher from your today..
I tried disabling each program alone. I had to place other today features (all standard with WM5) to create a list long enough to cause the scroll bar on landscape mode. When I return to the portrait mode, the space was still on the right side as before. Curiously, I put back the plugins, and the space was gone. Must have been refreshed.
Hi Curious,
To refresh the Today screen after the vertical scroll bar has disappeared try...
1) Select the Comms button to display comms options
2) Slip out the keyboard so that the comms buttons re-orientate
3) Slip the keyboard back in then exit the comms screen to return to the Today screen
Is the Today screen intact now?
Thanks. That worked. Now I'm just wondering why it's doing that in the first place. At least I don't have to reset to get back part of my screen. Thanks again.
Nice one! Well done. Not sure why it happens but I have the same issue but I don't mind it that much. I was guessing that it was the SPB Plus Today Plugin but I'm not sure.
Do you also use the SPB Plus Today Plugin?
No. Is that like cLauncher?
Hi Curious,
The SPB Plus Today Plug-in allows you to place shortcuts on the Today screen and group them under tabs which is nice but if you don't have it installed then that blows my theory
The only other thing I can think is that it is possible to alter the vertical scroll bar width by editing registry, the key is:
HKLM\System\GWE\cxVScr
The Default is (Decimal) 13 but you may be able to make this smaller so that it minimises the problem.
If you do find the cause then let me know
Thanks, but I think I'll stick with your previous idea. I'd rather not tinker with the registry if I don't have to since I'm not great at understanding registry changes.
cLauncher does what SPB plugin does. It's free and it allows different sizes for the icons. It really helps me with one handed function. It may be part of the problem if SPB does the same thing with the screen orientation.
Thanks again for your help.
Hi guys,
as u know know the TF3D by default takes up the 1st panel.
and when i try to use the other panels..i can no longer press the button X... because whenever i do that..the entire Xperia screen goes blank and hangs up. then even the power button doesnt work and i have to remove and reinsert the battery.
what to do?
this TF3D causing major issues.. is it bugged?
Doing a soft reset is way easier...open the battery cover, pull out the pen und put it in the small hole...
Are you using TF3D as panel or on the default today panel? If not already tried, use the TF3D-Pnaleinstaller here ion the forum...
When i try to access the panels, my X1 hangs most of the time as well, using it as the today screen. Is there any fix?
ya i use it as on Today screen.
is there a fix around this?
i disabled it now anywya.
btw does Soft Reset also delete all the data?
"btw does Soft Reset also delete all the data?"
no thats the diff between soft and hard reset
which version r u guys using? I am using beta2 and I dont have any problem switching panels... only flaw I have in the tf3d is I cant add some people to the favorite list for some reason... otherwise everything is working as it should be
Same here
I wanna know if anyone found a fix for this? or at least let us know if you have this issue. This is what I have narrowed it out to.
I'm using <Touch-IT Xperience v2.1> ROM which has TF3D installed by default
The Panel interface(The screen which opens up when i click panel button) works perfect when i disable TF3D in today
Now when I activate it, am able to open the panel interface and choose any other panel.
After this, if i click on the panel button, the x1 just freezes and all i can do is soft reset
Note:- I have no other application running.
If this continues I have to choose either panels or TF3D. I love it when i can use TF3D for daily use and shift to Facebook or media panel when i need them.
I just wanna know of this indeed a bug or am i missing something big
currently 2 versions available
hi,
i too was suffering fromt he same issues and took a while to realize that the tf3d was causing it.
afaik, there are 2 different versions of tf3d (i mean by 2 diff. people) for xperia.
i beleive most of us are using the one titled 'Full manila hd cabs' (or something similar - extremely sorry for not recalling the name of the developer who's made rhe effort to provide it) - and the one experiencing the issue.
there is another version linkd on the xda wiki, will try it now - and update with names of both developers as well as results
again
actually installing TF3D as a panel solved this issue
but since we have the new manila... the panel doesnt work
so we are back to square one... by default the TF3D sit on the today's screen and after that pressing the panel button freezes the phone
And if you choose the new panel with TF3d... it says loading forever
SOmebody please help
I'm an idiot - I can't figure out where the "small hole" for the soft reset is located.
Can someone show me a picture?
I'm an idiot - I can't figure out where the "small hole" for the soft reset is located.
Can someone show me a picture?
Click to expand...
Click to collapse
hehe... I spent ages trying to figure this one out too...
here's an image I got on Google search..
to access the reset button .. you need to take off the battery cover, pull out your stylus (since that is obstructing the button) and then using the stylus 'poke' into the hole besides the battery.
I find this location - and the need to take off the battery cover - everytime you need to reset very VERY painful
Hi, i have one problem, how to enable rotating screen (when changing position of a touch hd) while writing a text message or doing anything else. I've looked in settings and Ive found one thing - gsensor which allows me to calibrate but not to enable this feature. Its strange because when im watching for example pictures when i rotate phone screen rotates too, how to do it while doing everything else?
m4rioo said:
Hi, i have one problem, how to enable rotating screen (when changing position of a touch hd) while writing a text message or doing anything else. I've looked in settings and Ive found one thing - gsensor which allows me to calibrate but not to enable this feature. Its strange because when im watching for example pictures when i rotate phone screen rotates too, how to do it while doing everything else?
Click to expand...
Click to collapse
You need the Gyrator2 cab downloadable here:
http://gyrator.brins0.net/?page=downloads
together with the '.NET Compact Framework v3.5' , the link for this is at the bottom of the Gyrator download page.
thanks a lot !