Related
Hello:
I am using the "Wireless Modem" to connect my laptop to the web via GPRS on my PDA2k. When I use the connection via USB (cable between laptop and PDA2k), it works perfectly. When I do it via Bluetooth, I get the error message "Error 734: The PPP link control protocol has been terminated" right after it tries to register the computer on the network. It seems to recognize the username and password fine, but then it shows the error message and drops the connection.
Any clues as to why this is happening? I have the exact same settings in both the USB and BT dialup connections. I'd like to be able to use BT because it is one less cable to carry around.
Any help is greatly appreciated.
Thanks.
Fernando
bluetooth modem connection problem
Hi, i read in other forum about this problem, is it setting problem or XdaII problem?
I plan to get one mainly for this purpose, if it is a problem then i have to get something else.
any one please help to clearify.
thanks
AlexT:
I did this OK with my old MDAII, so I think this is not a Himalaya (MDA2, XDAII) problem, but rather a Blueangel (MDA3, PDA2k) problem.
Fernando
I had this problem recently while abroard.
Even though it "dials" the default GPRS connection you need to manually enter the correct APN name in WirelessModem->tools->settings. It defaults to the APN of the first GPRS account entered rather than the one currently active.
Hope this helps.
Do you know which ROM your version of wmodem came with? (wmodem is installed with the OS ROM not the Ext ROM, right?) Looking at mine, which I think is from i-mate, there is no tools menu in the wmodem applet, and therefore, no place to set/check the APN...
hey anyone has the JAM driver for the wireless modem? If yes can someone please post it here or attach it on this thread. I really need it in an emergency as I am away from my home and don't have the CD with me for the time being. Please please please can someone send me the file
thanks in advance
ysatti
hey anyone has the JAM driver for the wireless modem? If yes can someone please post it here or attach it on this thread. I really need it in an emergency as I am away from my home and don't have the CD with me for the time being. Please please please can someone send me the file
thanks in advance
ysatti
I figured my question out. It is included in the ExtRom. The version included in OEM_TMO_NL_IssueFix_142115.sa.CAB in T-Mobile_MDAIII_Ext_Rom_142115_WWE.rar has the Tools menu.
ysatti, there are a few versions floating around. Try this modem driver:
ftp://xda:[email protected]ers.com/Uploads/USB_modem
or this one:
ftp://xda:[email protected]/Uploads/Blueangel/O2_UK_Xda_IIs_Upgrade_v140242.exe/
If those don't work, try the attached CDMA version, even though you have a GSM phone. (Remeber you have to be logged in to see attachments)
hello, did anybody found out the solution? I had exc the same problem with my xda mini now. But couple months ago I canuse the bt wireless modem without any problem. I don't know what's up, I did not make any change on setting and installed new progame this period. Last the bt is worked, I can send and received files between the pc and mini.
hello, did anybody found out the solution? I had exc the same problem with my xda mini now. But couple months ago I canuse the bt wireless modem without any problem. I don't know what's up, I did not make any change on setting and installed new progame this period. Last the bt is worked, I can send and received files between the pc and mini.
Hi!
Did you add in modem properties initialisation string?
For me: AT+CGDCONT=1,"IP","www.umc.ua". I didnt use modem dialer, only usbmdm driver. Connection set up manualy. Sorry my little English ).
kevino said:
I had this problem recently while abroard.
Even though it "dials" the default GPRS connection you need to manually enter the correct APN name in WirelessModem->tools->settings. It defaults to the first GPRS provider entered rather than the one currently active.
Hope this helps.
Click to expand...
Click to collapse
That's work for me. After add the APN, now I can use bt wireless modem.
Thanks
bartman,
Glad it helped.
Dasert75's solution should work as well, and for people without the "tools menu" because it does the same thing.
Seems silly that it uses the default GPRS account but does not get the APN from the settings for that account though.
com open error (8)
i installed wm2005
but when i try to activate the witreless modem on my device on usb connection it says
com open error (8)
any one has any idea ?
Hi and HEEEELLLLPPPPPP!!!!
Has anyone managed to connect the Mda Compact to a G4 Powerbook via bluetooth to access the internet on GPRS account??
I cant get the Apple to create a bluetooth dial up connection with the mda.....
Will a change in stack be useful eg bluesoleil / toshiba???
Are there any modem scripts for the mac??
Has anyone achieved this via PocketMac??
I am trying to connect a G4 Powerbook with Tiger to a unlocked UK T-Mobile MDA Compact runnung Qtec 1.12 English rom with big storage hack on UK Orange.
:shock:
sorry always wanted to use one of those emoticons.... :wink:
Any help would be greatly appreciated.....
Riz,
Have been trying the same with both QTEK 2020 (forgot HTC name) and S100 (Magician) both on panther & tiger. Haven't gotten past the Bluetooth issue. In terms of GPRS scripts http://www.taniwha.org.uk/ has some, but not for our favourite devices. Am desparate to get same sorted. Do believe HTC's Bluetooth implementation ha something to do with it. remember on my 2020, I did run a Bluetooth utility to increase BT functionality, but to no avail....
Sorry not to have been of more help
Phil
Welcome Mr. Apple ;-) I am also running on "the only real system". We have to wait for http://www.markspace.com/missingsync_windowsmobile.html Will not take longer than 2-3 month any more.
Thankyou guys for your responses desperate (sometimes girlie like) cry for help. In my quest I have found that there are many like us stuck in the void between ppc and osx.
I even tried creating a connection using virtual pc !! Desperate times etc .....I can’t wait to try this Missing Sync ..sounds too good to be real so I have Emailed the company with our queries.
Have any of you guys tried it yet ???
Thanks again
sorry should read "to my "desperate girlie like etc
will poof read next time
sorry should read "to my "desperate girlie like etc
will poof read next time
Actually the mark/space site says The Missing Sync for Windows Mobile will be available before the end of June, not 2 or 3 months.
So any day now.
BUT, I have read in another thread here that both mark/space and pocketmac programs promise a whole lot more than they actually deliver, and are buggy.
Are there no other alternatives?
i think that the panther version is available now for the MDA Qtec s100 etc and the tiger version will be in the form of a free update??
it will retail for 39.99usd...could be a costly experiment??
has anyone tried any of these products in the past???
please could you point out the thread where you saw the negative reports on pocketmac and missing sync
thanks
Yes, long time ago I used Missing Sync for Palm Clié. It was stable, simple and great. Im quite sure, the new version for my MDAc will be similar. Thats the reason why I already deleted PocketMAC from my Powerbook and don't sync anything till MarkSpace software is available.
If you have an old version from Missing Sync, equal if Palm, PPC or whatever, you can updrade for just 19 $
By the way, not very actual, but helpfull:http://www.markspace.com/support/remove_pocketmac.html But you also have to check everything manually and yourself, cause with Tiger there are new and more files less.
Hi Mr Macmax,
My knowledge of palm based systems is not to good. Please could you tell me ......
Did you sucsessfuly use the missing sync to connect the clie via bluetooth to your powerbook?
Did the clie allow you to use it as a modem to connect the powerbook to the net??
This is what i want to achieve with my MDAc and powerbook via a bluetooth connection. I am hoping to use the MDAc as a bluetooth GPRS modem for my powerbook.
I was wondering if the missing sync program would bridge that particular gap??
Thanks
Hi riz,
well it is a very long time ago I used Missing Sync for Palm, so I can't really remember what was possible and what not.
But it's important to know that we have 2 possebilities to sync our Baby on a MAC: MissingSync or PocketMAC. Last one is a, sorry, pain in the ass, so rests MissingSync.
If it will work like you described, well, als them. But I'm quiete sure it will work cause it already worked with PocketMAC. Otherwise it can be a problem regarding to the right phone driver. May have a look here for modem scripts: http://www.taniwha.org.uk/
Thanks for your advise Mr Macmax but i have already been down the script path trying generic and ipaq scripts in the hope to fool the G4...but its just too smart...
I am tempted to buy the panther version of missing sync that is available now.... i think?? set up panther on the powerbook and give it a go??
still....could be a costly experiment
BLUETOOTH TO BLUETOOTH.....WHATS THE BIG DEAL!!!! ....one of the teeth needs a filling!! is there a doctor in the house!!!!!
sorry....this is really starting to bug me.... :twisted:
hello again ....
Has anyone managed to create a Gprs connection with the MDAc and Mac via a SD Wifi card so the phone modem is used to connect the Mac to the net?
Also.....
Anyone have experience with GSG script creater ?? Could it be used to make a bluetooth Gprs script for the MDAc so the Mac recognizes the bluetooth modem???
http://www.macronsoft.com/pages/en/gsg.html
anyone ??
Did you use an AT String. This is neccessary for windows. Look for the AT String needed for your provider and paste it into the properties of your bluetooth modem. At least, this is the way it works with windows.
I have managed to get it working with XP. I am trying to get it working with a Mac G4 Powerbook
..thanks for trying though....
The thing is, it shouldn't depend on the Os. The SSA service is standardized, your stack will be the same as for windows I guess (Widcomm, isn't it?). The only thing you need to set is the AT string, the rest should be done by the profile itself (i.e. giving you a dialog where to enter the connection settings).
The problem is that the i can not get the Mac to recognise the MDAc as a modem... so i fall at hurdle one..
..and i am not to sure where i would enter the init string ??
The Missing Sync for Windows Mobile is out now . but . i emailed them with this issue and they kindly informed me that this software will not allow the mdac to be used as a bluetooth gprs modem.
its been a while but has anyone cracked this little nut yet ?
ross from
www.taniwha.org.uk/
has been trying to help me on this but my knowledge of the mac is far from expert
is there any way to connect the two devices ie usb , wifi etc ?
as far as the g 4 is concerned the jam is modemless ?
The Missing Sync for Windows Mobile is out now . but . i emailed them with this issue and they kindly informed me that this software will not allow the mdac to be used as a bluetooth gprs modem.
its been a while but has anyone cracked this little nut yet ?
ross from
www.taniwha.org.uk/
has been trying to help me on this but my knowledge of the mac is far from expert
is there any way to connect the two devices ie usb , wifi etc ?
as far as the g 4 is concerned the jam is modemless ?
The Missing Sync for Windows Mobile is out now . but . i emailed them with this issue and they kindly informed me that this software will not allow the mdac to be used as a bluetooth gprs modem.
its been a while but has anyone cracked this little nut yet ?
ross from
www.taniwha.org.uk/
has been trying to help me on this but my knowledge of the mac is far from expert
is there any way to connect the two devices ie usb , wifi etc ?
as far as the g 4 is concerned the jam is modemless ?
Hey Guys,
I'm new to the PPC,where i just bought a K-Jam and installed activesync 4.1 on my laptop (winxp sp2).
i have also a bluetooth dongle (MSI) and it seems to be working fine with me, i can connect my kjam to the laptop to syncronize my data.
now when it comes to using the internet via my laptop, i'm lost
i've been reading all threats which confused me when setting up the connection and i'm still not able to work it.
please if anyone can help me step by step , i'll be thankfull
thanx in advance.
I have noted by Bluetooth experiences with connecting my Xda Exec to my Home PC internet connection. It took me over a weeks worth of shouting & frustration to get this working as I ended up falling down every pitfall you could fall down! :evil:
Anyway, take a look here:
http://www.xda-developers.com/viewtopic.php?=42488
GL
Andy
all you need to do is discover your device and connect to the dial-up networking connection.....
once that's done it's just a matter of getting the correct phone number, username and password (if applicable).
In the US for T-Mobile the phone number is *99# and there is no user name or password.
dear underwurld
thinks for your fast response and for trying to help, not sure if the link is working at the moment , i've tried to open it several times.
lvlolvlo,
i donot think it can be that easy, i came across alot of threats were all about the activesync and ports and network connections , what made it more complicated.
any help..?
Oops sorry about that....
Missed a bloody 't' out try again:
http://forum.xda-developers.com/viewtopic.php?t=42488
@lvlolvlo... DUN connection via TMobile.... erm I didn't go anywhere near that
:shock:
@freeway
i donot think it can be that easy, i came across alot of threads were all about the ActiveSync and ports and network connections , what made it more complicated.
Click to expand...
Click to collapse
EXACTLY: Nail. Head. Hammer!
This is EXACTLY what my thread explains - I have combined & condensed so much **** you wouldn't believe.
Andy
Dear Underwurl,
i would like to thank u for these amazing information and references , however ( to tell u the truth) it is still confusing to me..
i thouhgt there might be any guidelines where i could go through steps
1-
2-
.
.
and so on...
i think i have no problem connecting my device to the laptop ( not through the dialup thing but through the activesync 4.1 and it says connected in both)
also all reference were talking about incoming ports and outgoings ones which doesnot exist in activesync4.2 ( i know it might exist on 3.8 ver)
1- if it is somehow connected to the activesync, are there anything to be configured for the proxy server , and how ( i'm using my office lan)??
2- when it says connected i try to open IE but all i get is page is under construction...what does that mean???
3- is it something related to the bluetooth (msi) driver or ghosted ports??
u c....i'm going randomly considering all these thoughts, which is confusing me alot...
will appreciate any help...
OK....
So, just to be clear:
Have you installed those nice WICOMM Bluetooth services installed on your PC?
Andy
PS
Do you have WiFi in your office???? Bin Bluetooth if you have!!!!!!!
yes, I installed the BT software that came with my BT dongle
it shows widcomm in my driver data
and no idonot have wifi in my office
what do u think?
while connected with my laptop via activesync, i checked the tcp/ip setting with pocket mechanic, it is showing a different ip address than the one in my laptop connection (LAN connection),
but showing a correct host name
and it says " Local area networks cannot directly communicate across wide area networks because they are defind by a private class of ip's"
any idea?????
when i open internet explorer on my kjam it says "page not found"
is it that difficult for you guys,
no one have gone through this before??
Hi to all , i'm a new user of TYTN .
I always use it as a modem to surf the web via BT in conjunction with my laptop.
My question is : there is a way to defaul the wireless modem to BT ( it default to usb ) when start the program and ( maybe ) the program starts automatically without select MENU>START....
ALSO : i saw that the internal modem work also when the device is into sleep mode and without starting the wireless modem but in this case the connection hang after few minutes ( i think the BT connection to the PC hang ).
If the device is in active state the internal modem work too and fine but if no data is exchanged for a while the device goes to sleep without advice then connection hang.
No problem using the wireless modem .
Again ... there is a way to add the internet sharing via PAN BT like hermes' brothers ( P3600) ???
thx in advance
Greeting from Italy
Davide
I'm having the same problem, also in Italy on TIM. I have tried two different SIM cards, different data plans, and can not find any pattern to the disonnects. If the connection sits idle, it will suddenly stop passing traffic. I have at times been able to keep the connection active by running a game (WoW) in the background on my laptop, but as soon as I the game quits due to timeout (not playing), the connection gets "stale" and dies. Other times, the game will not keep the connection active either. The time it stays active is inconsistent as well. Sometimes when I connect, I get no received packets, only sent. If I disconnect/reconnect 4 or 5 times, usually I will get a good connect and be able to open a web page. I do find it is worse in the daytime than in the evenings, but this is not always true.
BTW, I'm on a TyTn, MacBook Pro w/ the modem script linked from the wiki.
Any ideas?
@ jcolley :
i don't know about macbook , but a problem like your appear on micro$oft XP with the built in bluetooth stack .... much more better use the widcomm stack or toshiba stack for bluetooth
vdavide said:
Again ... there is a way to add the internet sharing via PAN BT like hermes' brothers ( P3600) ???
Click to expand...
Click to collapse
Nope, as there still isn't an AKU3 ROM for the TyTN.
As far as disconnection problems are concerned, try using a desktop-based ping utility to keep up the connection.
Menneisyys said:
Nope, as there still isn't an AKU3 ROM for the TyTN.
As far as disconnection problems are concerned, try using a desktop-based ping utility to keep up the connection.
Click to expand...
Click to collapse
OK , but i mean if there is an apps to do this .
BTW does AKU 3.3 support more than 1 pc connected to inte rnet trought PAN BT ?
thx.
Vdavide
Hi,
Is there a way to get Spb GPRS monitor to work with the wireless modem. If I connect my PC to the Internet through the wireless modem the GPRS monitor doesn't see it as a live connection and therefore doesn't log the traffic.
I was wanting the same thing so I emailed SPB directly about this and they said that this is not supported in the current version. Implying that it might be in future releases and I've asked them if this is true but they've not yet responded (was less than a week ago).
However, there are bandwidth monitors available for your PC. I have one that is free and can be set up to only monitor dial up connections. It's called NetMeter by ReadError and works fine in Vista.
new wireless modem in aku 33 - maybe the old works also???!
Hi, there...
with the new aku 3.3 (test rom) theres an new wireless modem utility inside...
on one hand thats good... on other not so good...
the good side is that it now supports bluetooth...
on other side its not longer an "modem" as it is now... its a LAN-Device thats shared the internet connectivity from the phone with the pc, like an router with inet access!!!
the good thing is that the gprs monitor just looks to the connection... since it is the normal phone mobile internet access...
the bad thin is that it no longer gives you the option trough IR Beam...
but maybe if someone can send ,or put it here online, the old hermes ´wireless modem tool it works also with the aku33???
just search in windows folder for exe and post it here... thanks
steve
^that also means no driver installation in OS of PC is any longer necassry ... ... its one of the good thins..