Hello:
I have 2 x XDA II (mine and wifes) both units have the broadcomm /widcomm BT stack installed.
Mine has a free GPRS connection to the intenet (my work pay for it) - is it possible to share the internet connection of mine with my wifes unit over a BT link between the two??
Any ideas if and how this can be done
Related
Is it possible to connect another PDA specifically my 2210) to the XDAII to access the GPRS connection?
My XDAII is mounted low down in my car whilst I use my 2210 for Sat Nav testing purposes. I'd like to be able to connect to GPRS on the XDAII via my 2210 in order to use the Traffic Update facility in TomTom Navigator. Whilst I can bond OK with the two devices I cannot initiate a GPRS Data Call from the 2210.
Has anyone else tried this and had success?
Hi,
I'm trying to share my GPRS connection with my friend who has the IPAQ 1940. I'd like to use the Bluetooth connection.
I am using the BluetoothGPS.zip bluetooth stack which is basically the IPAQ one.
Can I just initate a SSA connection on the IPAQ and it'll automatically dial on mine?
To share Xda II intenet access to group of ppc or PC, I use pocketpcproxy (I named it ).
But that program are not perfected yet. If you are interesting, please check at http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=72
or http://en.pdamobiz.com/en/default.asp :wink:
Thanks, that's what i'm looking for...
BUT I noticed that the Widcomm bluetooth hacked drivers cause a lot of problems with the Pocket PC... Once you install that, your regular bluetooth gets messed up.
Also, you cannot use the Widcomm for SSA.
I'll email him anyway, thanks
hello guys... i'm just confusing
i'm try to connect my xda via bt as a modem ( i use sony erricson phone ) and make the connection as the dial up its working, but not work at xda II ,
i already make the pairing as the dial up cause i always going somewhere with my laptop and xda and connect to the internet via gprs, also i tried at the wi modem of xda through bt connection ...not work....anybody have suggestions..... thanks a lot
The XDA is currently not supporting the modem profile. You can use other device as modem but the XDA it self cannot be used as such via bluetooth.
Regards,
Mark
Hi,
In the following document you can find the answer. (last question)
This is for the qtek 2020 or XDAII with Win XP
Cheers
Somehow I managed to make a connection (pair the evices) but when it comes to establishing what kind of services can happen between the two devices, nothing happens. In the end, I have a connection, the devices show as paired but I can't move files or connect one to the other in any possible way. Any ideas anyone?
Runing ROM 1.66.00WWE
Radio 1.10.00
Protocol 1337.18
Ext ROM 1.66.131
on notebook running
Windos XPhome
Sony USB BT adapter
@MCEITLIN
To what device have you connected?
mark
I paired a vaio V505 tunning XP and my I-mate
Cheers
device
markutah said:
@MCEITLIN
To what device have you connected?
mark
Click to expand...
Click to collapse
i'm using the xda 2 and laptop ibm x 31 with bluetooth install from ibm, u got the answer
Re: device
@MCEITLIN and @benmuliono
If your devices are paired then you can active syn over BT to sync your device and the pass-through to connect to the internet.
Indeed you can't browse the network because the network profile is not supported by the Bluetooth stack used in the XDA.
To be able to browse the network you've to use the WidCom Bluetooth stack and a BT dongle on you PC/Notebook/Laptop whatever which supports the network profile or PAN.
The WidCom bluetooth stack can be found on this forum
Mark
Hi,
I've a SE K610i and a magician.
As I am using my K610i for 3G service, I was trying to pair it with my magician. Apparently, i can paired both of the device. However, when I'm trying to initiate the dialing from my magician, it doesn't seems to connect to the phone to dial it. Basically I would like to use my PDA to surf with 3G speed (pairing with the mobile phone) and make normal calls with my magician. Would that be possible?
Is there any guide on how to do it? and also, is it because the standard magician bluetooth software does not support it?
Thanks & Regards,
i also have the similar problem when i want to connect my o2 mini to my K810i for internet connection. My O2 mini does not connect to the mobile phone via bluetooth. Connect by Infrared is working fine. Transferring files via bluetooth is working fine too.
My setting did not have any problem because it working fine with my treo 750.
Anyone can help me?
Are there really nobody in o2 mini anymore? OK, for the one that still with the mini. I have found the problem. When pairing O2mini bluetooth with any other phone which you want it to act as a data modem, just click 'NO' when u being ask 'will you want to add a serial port". You should able to dail after this.
If you replace the microsoft bluetooth stack with the Blue Soleil one (available on these forums) you get a hell of a lot more functionality with the bluetooth, it also adds the PAN facility. I have successfully connected my magician to my K800i and my C905 and both will suft the net perfectly well. You can do the same with the broadcom bluetooth stack on your home pc.
Hi all,
So, two devise exist. The first one is WM6 smartphone (hp iPAQ 514). The second is hp h2210. Smartphone has connection to Wi-Fi and works fine. The h2210 has only Bluetooth. Could h2210 connect to smartphone and to go to WAN via Wi-Fi?
The smartphone provides similar feature for connection BT to GPRS/EDGE not Wi-Fi. It works fine.
Could you have some ideas?
PS. Pardon for my broken English.
Hi!
As I understand networks, my problem is routing problem. So, when I will have the route program on the smartphone, the task (BT over Wi-Fi) will do!
Could you know any route program for smartphone?