Hi profis,
after a try to get the Developerv1.2 to unlook my Kitchenrom2003
with Activesyc1.7 the crash happend. Sync started but was brocken and
now after a hardrest the Screne ist with sw Strippes.
What can I do to come back to an good ROM????
Please help me
Reiner
let's clear up some things first ?
1. what device do you have ?
2. how you installed the 1.2 ?
3. what do you mean by unlock "Kitchenrom2003 with Activesyc1.7 " ?
Decebal
usualy if upgrade fails, u retry it, and it starts over again.
but im not sure about the stripes. i think u need to do it via sd card/bootloader method now.
How to with sd-Card now??
Now what I need to do it with my SD-Card/Reader?
All oK I got back to DevROMv1.2 with SD-card!
Hi freaks,
now it works after SD-Boot.
mfg Reiner
i have Qtek 1010 i did upgrade from PPC 2000 to 2003 in the middle of the upgrade 82% it get stuck .. now my qtek is not working ..
i have SD card .. but i dont have a backup for my previuos OS ..
any help will be appreciated..
reagrds to all
QUsai
How were you doing the upgrade, PC install or the SD card boot loader
method? If was the PC install trying using the SD card boot loader method.
For more info. on the SD card boot loader method just do a search on the subject in this forum.
HTH
HELP.... I was unable to upload my sx56 with the new 2003. I crashed my ROM... Any ideas on how to restore.
Rock
Tell me what you see from the display.
I can help!
Froozen SX56 while upgrading the ROM
Unfortunately my system crashed when i was upgrading my ROM this is for a AT&T SX56 Pocket PC which I wanted to unlocked so that I could use it with T-Mobile SIM card. Now the screen says :
Upgrading
It will take about 5 minutes...
I was trying to upgrade it with the xda-developer rom verison.
I dont have any backup also for this device please help and I do have a SD card and SD card reader also.
If the bootloader not be erased, you could still use SD to restore OS.
If the bootloader already damaged, the only solution is hardware solution.
I can help you to resolve all problems
How to restore using the SD please tell me.
I do get the bootloader mode when i pressed the power , navigator and reset button on the pda
shri62 said:
How to restore using the SD please tell me.
I do get the bootloader mode when i pressed the power , navigator and reset button on the pda
Click to expand...
Click to collapse
using Xdrit to write the OS to SD card via SD writer.
you can get Xdrit from xda-developers.com (do some search).
Need real help
cgigate said:
I can help you to resolve all problems
Click to expand...
Click to collapse
I had this stupid RadioStack crash that resulted in GSM ERROR that made my device unable to recharge the battery or run mobile function, so the status now is a ppc which has no phone and should always be conected to AC
when I consulted the Agent service tey claimed it's a motherboard error that would require a new baord, which'll cost me around 300$.
could you please help me!!
Cgaigate, is it possible to restore a corrupt radio stack using jtag, if you have the capability I can let people know.
GSM ERROR - RADIO STACK CRASH
Hi Smiley,
I crashed my Radio Stack, too. Has anyone an idea? Is it possible to repair? By myself?
I heard cgigate could help?
Bye
Yep - "GSM Error" in Wallaby Bootloader 5.15
Anyone got any ideas on fixing this one?
Cheers!
Andy
Anybody pls Help me...
My Wallaby GSM fail...cant connect to PC...Cant Hard reset.
And Im Try to flash using SD card..But not Succes..
And One More... How to Convert Nbf to nb1 File???
tanks...for All
need help
i have a problem. i found my father's xda in our storage room. when i try to turn it on. it's just freeze on the bootloader (o2 bootscreen), and the worst thing is the screen is flipped ( you have to hold it upside down and look it through the mirror to see it correctly)
i try to flash the rom. but the activeSync doesn't recognize my device, after that i try to flash it from the sd. but nothing happen.
PLEASE HELP ME!
O2 XDA
bootloader 5.22
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
This may help!
Hi Kanwalgee.
The problem is that you tried to flash a ROM for SPL3.5 and you have SPL 1.20.
I read some of that in this thread. Read and it maybe help you to correct the problem.
Then go to the mobile 6 section and read this other thread.
I hope this will useful for you.
Regards.