Related
Anyone has the operator HK CSL1010 setting cab file for JasJar?
marinefish said:
Anyone has the operator HK CSL1010 setting cab file for JasJar?
Click to expand...
Click to collapse
got from DOPOD
is this work for you?
thank you
What is the difference between the two files? Do I need to install both? After installed, can I uninstall the program? Pls advice.
Marinefish
marinefish said:
What is the difference between the two files? Do I need to install both? After installed, can I uninstall the program? Pls advice.
Marinefish
Click to expand...
Click to collapse
you need those 2 cabs one is the COnnection setting.
the other is the MMS inbox setting and something like IE setting,
hi all.
i have the XDA EXEC and i dont want to run the EX-ROM.
i do reset after HR and it doesnt install all the O2 stuff.
but i dont have the video dailer.
what cab file do i need or how can i add the dailer without the O2 suff..
pleaaase help.. :?
thanks
There are two files you need to run, here they are...
HTH
Fin
thanks it work great!!!
What about the Orange ROM files??
The Orange ROM contains the Enable_VT_RTPlugin_0727_2_signed.CAB file as well, but not the other one. The other one only seems to disable call waiting anyway, so you shouldn't need it.
Melty said:
The Orange ROM contains the Enable_VT_RTPlugin_0727_2_signed.CAB file as well, but not the other one. The other one only seems to disable call waiting anyway, so you shouldn't need it.
Click to expand...
Click to collapse
Didnt realise that was what it did - have removed it to avoid any confusion!
Cheers,
Fin
I've been looking at EXACTLY what each CAB file does and I keep meaning to write a post explaining, but I haven't got round to it yet. Maybe I'll get some time tonight...
Melty said:
I've been looking at EXACTLY what each CAB file does and I keep meaning to write a post explaining, but I haven't got round to it yet. Maybe I'll get some time tonight...
Click to expand...
Click to collapse
Have you seen this thread...
http://forum.xda-developers.com/viewtopic.php?p=179142#179142
is it ok ?
To remove O2 customization on xda exec, we hard-reset & before custom install we soft reset.
Can I use the same method on MDA pro to avoid T-mobile customisation ??
Re: is it ok ?
Dare2Dream said:
To remove O2 customization on xda exec, we hard-reset & before custom install we soft reset.
Can I use the same method on MDA pro to avoid T-mobile customisation ??
Click to expand...
Click to collapse
Yes you can, just install the cabs you need afterwards (there's some useful patches)
Just found this and tried it - working fine!
Features:
Enable GPS Settings
Enable and show the Wireless plugin in Today screen
Disable the OEM/Carrier Phone Skin
Remove Battery and Wireless Manager from Tray Icon
Disable SMS Sent Notification
Show Cap/Shift State
Enable and Mount Extended ROM
Improve Bluetooth Stereo A2DP Sound Quality
Enable/Disable HSDPA
http://www.theunwired.net/?itemid=3256
Download:
http://www.fit4cat.de/thread.php?threadid=56 you need an account to download
Hi,
Can you post link to the program?
Gilbert
I think it will be fair, that we download the programm from the site of the developer.
So you can visit his site and register in the forum. I think he will do many updates of this small goodie, so he need some of our support. If everyone can download the proggie from anywhere else, its possible that he will not put more development power on it.
Think about it :wink:
Use this user/pass for download:
user: foobar
pass: barfoo
So, the author can keep track of downloads and you don't have to register...
pof said:
Use this user/pass for download:
user: foobar
pass: barfoo
So, the author can keep track of downloads and you don't have to register...
Click to expand...
Click to collapse
i think this is not correct, but without xda-developers i have no information for build this Application.
For alll users who can unterstand german, please register, thanks.
All other can use this account for next time.
Have all fun with my tool !
and thanks to xda-developers forum for all this informations !
the user/pass is not working
Thanks,
Gilbert
Gilbert said:
the user/pass is not working
Thanks,
Gilbert
Click to expand...
Click to collapse
is it working !
thanks bongo user, I think you programmed a great tool. helped a lot to me even though I can't check whether hsdpa is really working because there is no specific sign (h instead of u for example) on the hermes to see whether I am in hsdpa or in normal umts.
i have downloaded the software, but have no idea as to what to do with what i have downloaded.
I unpacked the file, amd it is just a bunch of cab files... Unfortunately, I am not sure as to how to proceed from there in order to get the program to work on my Tytn...
Can anyone please help me out? I am new to pocketpc devices in general and don't know my way around yet...
jigga009 said:
i have downloaded the software, but have no idea as to what to do with what i have downloaded.
I unpacked the file, amd it is just a bunch of cab files... Unfortunately, I am not sure as to how to proceed from there in order to get the program to work on my Tytn...
Can anyone please help me out? I am new to pocketpc devices in general and don't know my way around yet...
Click to expand...
Click to collapse
Copy this cab file to your device.
run this cab file like an "EXE File.
Then it installed my App.
thankyou for the quick response... I am going to try this out and then report back
That's a nice tool.
However, I chose to remove the communications manager from the system tray, but now the battery icon is gone too, even though I have not checked that box. And I actually like the battery indicator.
Checking and unchecking the battery indicator checkbox yields no results. Do you have any suggestions?
BongoUser said:
pof said:
Use this user/pass for download:
user: foobar
pass: barfoo
So, the author can keep track of downloads and you don't have to register...
Click to expand...
Click to collapse
i think this is not correct, but without xda-developers i have no information for build this Application.
Click to expand...
Click to collapse
Sorry BongoUser, I just wanted to make it easy for non german speakers... you can delete the account if you want.
I also updated the wiki information with fit4cat Hermes Tweaker:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
Will you be updating it when we add more registry tweaks to this page like the registryWizard guy does?
hmm... no luck...
I copied it via activesync to my documents folder on the tytn.....
When i open the file i see a bunch of little files that cannot be opened since they are not associated with any programs...
Can you please give me a step by step instruction as to getting this program working? Thanks again!
EDIT: got it! i was unzipping the file before sending it to the ppc, when i should just have sent the file over as it came
pof said:
Sorry BongoUser, I just wanted to make it easy for non german speakers... you can delete the account if you want.
I also updated the wiki information with fit4cat Hermes Tweaker:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
Will you be updating it when we add more registry tweaks to this page like the registryWizard guy does?
Click to expand...
Click to collapse
No problem. as long as i don't have a english register page and other english templates for my board it is ok.
Thanks for updating wiki
Yes i plan a new release next week with new features from wiki site.
jigga009 said:
hmm... no luck...
I copied it via activesync to my documents folder on the tytn.....
When i open the file i see a bunch of little files that cannot be opened since they are not associated with any programs...
Can you please give me a step by step instruction as to getting this program working? Thanks again!
EDIT: got it! i was unzipping the file before sending it to the ppc, when i should just have sent the file over as it came
Click to expand...
Click to collapse
How you open this file ??
Double Click in File Explorer will install it.
don't unpack it with winzip....
Next release i make a setup.exe for windows pc's.
BongoUser said:
Yes i plan a new release next week with new features from wiki site.
Click to expand...
Click to collapse
Great!
You can also have a look at Universal and Wizard registry tweaks, most of them are generic WM5 tweaks, not device specific.
Some links:
http://forum.xda-developers.com/viewtopic.php?t=39725
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Hi Bongouser..
All i had to do was to copy the file over to my documents folder in the pocket pc WITHOUT unzipping it.
I then clicked on the file in the pocketpc and it installed...
I think my problem was that i was looking for an exe file somewhere to click on to install the program..
It works great though!
I do have a question about the sound quality adjustment for the bluetooth headphones...
what is the default setting from the factory for this on the Tytn?? I am just trying to compare the different levels to the standard so that i can decide which I like best.
Thanks!
jigga009 said:
I do have a question about the sound quality adjustment for the bluetooth headphones...
what is the default setting from the factory for this on the Tytn?? I am just trying to compare the different levels to the standard so that i can decide which I like best.
Thanks!
Click to expand...
Click to collapse
Uncheck the Checkbox, then default will be set.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
Read the this part: Improve BT A2DP sound quality
Then you can the the default settings too.
pof said:
BongoUser said:
Yes i plan a new release next week with new features from wiki site.
Click to expand...
Click to collapse
Great!
You can also have a look at Universal and Wizard registry tweaks, most of them are generic WM5 tweaks, not device specific.
Some links:
http://forum.xda-developers.com/viewtopic.php?t=39725
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Click to expand...
Click to collapse
i know i know
i test all tweaks before i include it in my application.
Hi,
I want to flash my XDA Orbit with WM6. o2 has the image on their page, but it first installs WM6 and then destroys many things when it tries to put everything to GPRS, so that users pay much money instead of using the built in WLAN.
I read something about flashing and then soft resetting, so that it cannot run the branding tool. The .cab files with the branding tools an Tomtom and some patches are lying then somewhere. Where?
Is this method good?
When do I have to soft-reset?
regards,
Stefan
SurfaceCleanerZ said:
When do I have to soft-reset?
Click to expand...
Click to collapse
Just as the unit starts the customisation, directly after the auto-setup routine.
HTH,
Hello,
thank you for the info. I found that out in the meantime, but where are the update files then? I`m unable to find them...
regards,
Stefan
SurfaceCleanerZ said:
Hello,
thank you for the info. I found that out in the meantime, but where are the update files then? I`m unable to find them...
regards,
Stefan
Click to expand...
Click to collapse
In extended ROM, if you want to take them out, it's possible to cook the same ROM and re-flash it without this part....
If you want to see this stuff, you'll need an application like Total Commander.
Hello,
thank you for the info!
Which version of Total Commander? And why Total Commander? To view cabs? This is possible with WinRar, too. But there are only the installer files and the complete RUU image. I tried TC but I got the same result as with winrar.
Or is the PDA version meant?
I want to use the original ROM from the o2 homepage, just without branding. I have no o2 SIM card, bought it from ebay. And I don't want to unlock it, because of warranty.
regards,
Stefan
Hi Stefan,
SurfaceCleanerZ said:
Hello,
thank you for the info!
Which version of Total Commander? And why Total Commander?
Click to expand...
Click to collapse
Total Commander allows you to look n the extended ROM on your device I presumed you wanted to clear files out that way.
SurfaceCleanerZ said:
To view cabs? This is possible with WinRar, too. But there are only the installer files and the complete RUU image.
Click to expand...
Click to collapse
You can look in the RUU image for the nbh file (using WinRAR), then break this apart to take out the ExtROM....
SurfaceCleanerZ said:
regards,
Stefan
Click to expand...
Click to collapse
Hope this helps - if not, then I've probably done what you're looking for already and could put it on the FTP site....one of the Mods will tell me if this is a no-no....
Hello again,
I extracted the .nbh file.
"for the nbh file (using WinRAR), then break this apart to take out the ExtROM.."
What to do with it? renaming to .zip or .rar doesn't result in winrar opening it...
It's the german ROM.
I want to flash it as meant and then stop soft-reset when branding wants to start (waiting 3s). And then install only the needed fixes (sd fix, cam fix etc.)
regards,
Stefan
regards,
Stefan
SurfaceCleanerZ said:
Hello again,
I extracted the .nbh file.
"for the nbh file (using WinRAR), then break this apart to take out the ExtROM.."
What to do with it? renaming to .zip or .rar doesn't result in winrar opening it...
Click to expand...
Click to collapse
Ah. I assumed you had some cooking tools...you need to run NBHExtract, take out the EXTRom, run Dark Simpson's HTC ROM Tool to re-constitute the ROM and then re-flash. Are you happy about all this, or did you want to stay 'official'?
SurfaceCleanerZ said:
It's the german ROM.
I want to flash it as meant and then stop soft-reset when branding wants to start (waiting 3s). And then install only the needed fixes (sd fix, cam fix etc.)
Click to expand...
Click to collapse
Do you have a link to the German ROM somewhere? I'll happily do all this and post the file somewhere for you to pick up.
Hi,
I don't want to brick it ;-) If I flash a cooked ROM, I have to cid unlock it before. Is this necessary? The premium Rom looks nice. A german version is not available, or did I miss it?
At xda-zone where they postet this, they wrote that somewhere then lying the .cab or .exe files which are executed then. Is it not posssible to extract them? And then install them manually?
On my request where they are no one answered...
I never cooked a rom or something like that, yet.
I can give you the link, but I think you are unable to get it, because there is a serial check before dl. But you can try.
If you have ICQ, I can send it.
http://member.htc.com/ruudownload/O2Wm6SnCheck.aspx
The cam fix (found it in a forum) leads into the cam working good and the new modes are nice but often there is a message that the cam cannot be initialized. Then soft-reset helps.
Do you have the radio fix? Is TMC possible with it? With Navigon?
regards,
Stefan
SurfaceCleanerZ said:
Hi,
I don't want to brick it ;-)
Click to expand...
Click to collapse
I've got the antidote to bricks... I'll test it first.
SurfaceCleanerZ said:
At xda-zone where they postet this, they wrote that somewhere then lying the .cab or .exe files which are executed then. Is it not posssible to extract them? And then install them manually?
Click to expand...
Click to collapse
Yup. That's exactly what I'll do for you.
SurfaceCleanerZ said:
On my request where they are no one answered...
I never cooked a rom or something like that, yet.
Click to expand...
Click to collapse
Well, I'm only a trainee chef, but I can break ROMs apart and put them back together easy, without playing with the content too much - that's all you need here.
SurfaceCleanerZ said:
I can give you the link, but I think you are unable to get it, because there is a serial check before dl. But you can try.
If you have ICQ, I can send it.
http://member.htc.com/ruudownload/O2Wm6SnCheck.aspx
regards,
Stefan
Click to expand...
Click to collapse
Yeah, I'm at work at present, probably couldn't get the file through the firewall... Could try emailing to me - if you PM I'll give my email address.
I'm not sure if somebody has already put this cab somewhere on XDA, but in case no one has, here's an app that allows you to install all cabs in your TP2 quickly & silently. I found it somewhere on the Internet. Now you don't have to install every single cab and go through the installation process over and over again.
This app:
- is useful for those who are fond of hard-resetting their tp2 or flashing new roms..
- Works great on TP2.. (at least it does on mine)
Just install the cab on your tp2 & run the program. You'll figure out how everything works from there. The app is in French, but the ZIP file below includes the setup for English. Install the setup if you want the app in English.
Working??
Sounds great!! Does any one have any screen shots of this? or can confirm this works?
It works
Monotonyallthetime said:
Sounds great!! Does any one have any screen shots of this? or can confirm this works?
Click to expand...
Click to collapse
Hi monotonyallthetime...
I can confirm it works.. it really does & the installation process is quite fast.. It even works as a background app
I'll post the screenshots pretty soon..
You now it is a very old idea? On most roms you can find UC (for user customization) that do the same. Search the forum for this one.
Thanks
tonidekohlanta said:
You now it is a very old idea? On most roms you can find UC (for user customization) that do the same. Search the forum for this one.
Click to expand...
Click to collapse
Thanks for the notification.. I'll go check it now..
Or you can use Sashimi, which has also been around a long time, to do the same thing plus even more. And it is in English and well supported.
App in English..?
azmi_412 said:
I'm not sure if somebody has already put this cab somewhere on XDA, but in case no one has, here's an app that allows you to install all cabs in your TP2 quickly & silently. I found it somewhere on the Internet. Now you don't have to install every single cab and go through the installation process over and over again.
This app:
- is useful for those who are fond of hard-resetting their tp2 or flashing new roms..
- Works great on TP2.. (at least it does on mine)
Just install the cab on your tp2 & run the program. You'll figure out how everything works from there. The app is in French, but the ZIP file below includes the setup for English. Install the setup if you want the app in English.
Click to expand...
Click to collapse
Hi ..
Thanks for the file.. I downloaded and installed and tried the english setup file but its still in French...?! Is there something else I need to do..?
mcse17 said:
Hi ..
Thanks for the file.. I downloaded and installed and tried the english setup file but its still in French...?! Is there something else I need to do..?
Click to expand...
Click to collapse
Look around.
mcse17 said:
Hi ..
Thanks for the file.. I downloaded and installed and tried the english setup file but its still in French...?! Is there something else I need to do..?
Click to expand...
Click to collapse
After you installed the English setup, the app would still be in French. Ignore this first and go the last tab on the app. You'll see a box that says 'French'. Click that box and an option box will appear. You'll see 'English' there. Click 'English' and the app will show up in English straight away..
Thanks
Nagrom Nniuq said:
Or you can use Sashimi, which has also been around a long time, to do the same thing plus even more. And it is in English and well supported.
Click to expand...
Click to collapse
Thank you for the suggestion.. I will try Sashimi.. Sounds good.. Thanks again
Nagrom Nniuq said:
Or you can use Sashimi, which has also been around a long time, to do the same thing plus even more. And it is in English and well supported.
Click to expand...
Click to collapse
Boy I'll second the vote for Sashimi. I have mail, wifi, and most all my apps auto setup after a ROM flash. Works great once you spend the time to set it up. Only problems are some ROM's need different apps (is Opera already at 9.7, does it include an auto-lock, task switcher, etc) but it's a very cool program:
http://www.winmo-experts.com/viewtopic.php?f=7&t=4
a042349 said:
Boy I'll second the vote for Sashimi. I have mail, wifi, and most all my apps auto setup after a ROM flash. Works great once you spend the time to set it up. Only problems are some ROM's need different apps (is Opera already at 9.7, does it include an auto-lock, task switcher, etc) but it's a very cool program:
http://www.winmo-experts.com/viewtopic.php?f=7&t=4
Click to expand...
Click to collapse
Many thanks for the suggestion.. And also for the link.. That's really cool..