We all need to work at solving this mystery, so what I want everybody to do is post the following info:
After upgrading to 2k5...
1)Do camera/record buttons work? Yes/No
2)What version(s) of 2k5 have you tested?
3)What was the last non-2k5 ROM you had installed?
4)What Radio version do you use? (settings>device information>version)
5)What is your bootloader version? (press power+soft reset+nav pad)
6)Operator/Country/Year of purchase?
I'll go first to set the ball rolling:
1)NO
2)1.50g, 1.50h
3)Sin's 2003SE
4)1.18
5)1.06
6)o2, UK, 2004
Lets try to stick to topic as much as possible so it's easy to sort through the information.
Thanks!
1) NO
2) 1.50H
3) Sin's 2003SE
4) 1.17 (tried 1.18 with 1.50g before)
5) 1.06
6) O2, UK, 2004
My data:
1)NO
2)1.50f, 1.50g, 1.50h
3)Sin's 2003SE
4)1.17, 1.18
5)1.06
6)QTEK
1)YES
2)1.50f
3)Sin's 2003SE
4)1.18
5)1.03
6)o2, SG, 2004
1) YES
2) 1.50H
3) 2003SE, not sure which
4) Radio 1.18.00
5) Bootloader v1.06
6) O2/Germany/December 1st 2003
WM2005 button problems
1) YES
2) 1.50f, 1.50g, 1.50h
3) WM2003 SE english translated from chinese with WM player 10
en WM2003 original T-mobile
4) 1.17 (orignal T-mobile)
5) 1.03
6) T-Mobile/NL/2004
1)NO
2)1.50h
3)WM2003
4)1.14
5)1.06
6)CDL, USA, 2005
Buttons work on my Dad's MDA II though, everything is the same except it has bootloader 1.03
1) YES
2) 1.50f, 1.50g, 1.50h
3) WM2003 SE 2.20
4) 1.18
5) 1.02
6) T-Mobile USA
After upgrading to 2k5...
1) Yes
2)1.50f
3)WM2003se ENG DIAMOND 1.2
4)1.17.00
5)v1.06
6)Orange/Netherlands/2004 (type: SPV M1000)
1) YES
2) 1.50g
3) 2003SE(2.06)
4) Radio 1.12.00
5) Bootloader v1.03
6) AIS /Thailand /January,23th 2004
1. NO
2. Old one (with ram disk) g, h
3. SE 2.06
4. 1.18, 1.17
5. 1.06
6. O2, Australia, 2004
1) NO
2) 1.50f, 1.50g, 1.50h
3) WM2003 SE 2.06
4) 1.18, 1.17
5) 1.06
6) Idea, Poland
1) NO
2) 1.50f, 1.50g, 1.50h
3) WM2003 SE 2.06
4) 1.18
5) 1.06
6) O2 Indonesian
1) Yes
2) 1.50f
3) O2 UK 1.72
4) 1.17
5) 1.03
6) O2 UK 2004
1) NO
2) 1.50f
3) SYN Merged 2003 SE
4) 1.18
5) 1.04
6) TMN/Portugal/2004
1) Yes
2) 1.50(all releases), now back to g
3) XdA2JoJo.v3.2zS
4) 1.17(1.18 also)
5) 1.06
6) Spacefon Ghana 2004 (original equipment CDL sim-free)
Video also works but each shot generates additional crap file.
victor
My info:
1) YES
2) 1.50f
3) Genuine 1.72ITA
4) 1.18
5) 1.03
6) Vodafone Italia
1) YES
2) 1.50g (all versions)
3) 2003SE (2.06)
4) Radio 1.12.00
5) Bootloader v1.03
6) AIS /Thailand /2004
1) NO
2) 1.50h (all versions)
3) 2003SE (2.02)
4) Radio 1.17.00
5) Bootloader v1.06
6) ORANGE/UK/2004
1) NO (not anymore)
2) 1.50h (all versions)
3) 2003SE (2.02)
4) Radio 1.17.00
5) Bootloader v1.03
6) NL/2003
Buttons have worked on all versions of wm2005, but now on my last reflash (fourth time to H version) none of the buttons work, contacts calender notes nor camera. when I reassign different fucntions save and assign defaults again they work, but on the next soft reset they stop working ??
pretty weird if you ask me? :?: :?: :?: :?: :?:
as if some process is not being loaded?
Related
at first i am not expert...but i want to tell u to i can flash rom by xdarit xdaool ....by *.nb1 *.nbf fixbootloader .. by no have a problem........ by read in this site... i flash rom more than 50 times : ) at my own O2
yesterday i buy secondhand from seller......... to give it for my wife because her birthday present
no luck vibrate is not use and i didn't check infared because i never use it........ but case ias very new likw a new model that make me decide to buy
when i come back to home i open it and that show my rom is.... xda ser12 radio 4.17 Wallaby 5.17 can talk...internet ..all of function ok
then i upgrade radio to 4.21 with no problem and next step i downgrade 5.17-5.15 by bootloaderfix...that no problem wallaby 5.15 already....
i burn rom 4.00.11 Nk.nb1 cook from makis kitchen ( that alway success everytime when i flash rom ) but when write to sd that show message
cannot write because I/O error that make me funny because i use this rom in 2 days ago...i try again and same....... may be change rom i think....
1.and i flash rom 4.01.00 Nk.nbf by xdarit to sd and put to my O2 and wait until finish..... hard reset.... but that hank on boot screen this rom tet only not for sell
2.i try to second time and i flash rom 4.01.00 Nk.nb1 by xdatool to sd and put to my O2 and wait until finish.....check sum ok hard reset.... but that hank on boot screen this rom tet only not for sell again and show current rom+radio+32S54
3.same as 1-2 but in wm2003 rom again and again 4.00.05
4.same as 1-2 but in wm2003 rom again and again 4.00.16
5.same as 1-2 but in wm2003 rom again and again 4.00.21
6.same as 1-2 but in wm2003 rom again and again 4.01.00
7.same as 1-2 but in wm2003 rom again and again 4.01.16
8.same as 1-2 but in wm2003 rom again and again 4.00.11
9.same as 1-2 but in wm2003 roma gain and again 4.00.33
10.same as 1-2 but in wm2003 roma gain and again 4.0021
( also in wallaby 5.15 5.17 5.22 6.22 ) because i have patch 5.17 and 6.22 aleady ( and use with xdarit xdatool )
what happen ?????? i hank on boot screen when finish all of rom 2003 of i have but in 2-3 days agos that work
then decide to flash rom to 3.17.03 ppc2002 Nk.nbf / Nk.nb1 ................ that success........ but when i press infared recieve... that hank and i will reset it.... at everytime to press it ... i delete it in windows/start menu /program.... and sometime my O2 is hank...
then decide to flash rom to 3.20.06 ppc2002 Nk.nbf / Nk.nb1 ................ that success........ but when i press infared recieve... that hank and i will reset it.... at everytime to press it ... i delete it in windows/start menu /program.... and sometime my O2 is hank...
and another rom in 2002 is ok all of rom............. ??????????
i download rom again with makis and lumpistefan with both and save as 4.00.11Nk.nb1.makis 4.00.11Nk.nb1.stefan
download in 10 type of rom in nb1 and Nbf
i flash to 2003 again and same 1-10 step that i write............................but in 2002 rom that no problem
Please somebody tell me..... what happen with my wife O2 ..... i cannot flash rom to 2003 but 2002 it work only Unbelievable
i will come back to home and borrow my O2's friends to test flash rom in this eveninig ( this time 15.00 in thailand ) and will post again
Any idea ????? what happen ???
Have this same problem before ? ... because i seach it and cannot find.....
Now ... i use this
Version
Rom version : 3.20.06 ENG
rom date : 07/30/03
Radio version : 4.21.00
Protocal vesion : 32S54
Hardware
CPU : ARM SA1110
speed : 206Mhz
Ram size : 64 MB
Flash size : 32 MB
Flash chip type : 28F128
Databus : 32 bits
LCD : 240x320 TFT
colors : 4096
Indentity : PW10A1
Platform : Pocketpc
IMEI: : 350312001214712
PLEASE SOMEBODY HELP ME ............................
sorry in very bad english.........
Have you tried using a different sd card for flashing?
successfully to upgrade im wm2003 again
yesterday i go to repair infared...and come home to try again........ that can upgrade in all of rom in wm2003 or 2002 ... ... ???
why did broken infared make me to 2002 but for 2003 not ..... ? any idea ?
Login Dopod International Web site (www.dopodasia.com) and find that 838 ROM Code Update (English OS Only) is avilable for download.
1 Dopod 838 ROM Code Update (2006/4/19)
Dopod 838 Rom Code (2006/04/19)
ROM version: 2.21.13.1 WWE
ROM date: 03/09/06
Radio Version: 02.19.11
Protocol Version: 4.1.13.09
ExtROM version: 2.21.13.102
Updates:
1) Provides client-side support for Microsoft DirectPush (push mail).
2) Improved Comm Manager interface for 1-click DirectPush on/off and data connection detach.
Installation Guide:
*IMPORTANT! - please read these instructions carefully before updating your device
1. Download the .zip file and extract the .exe file within.
2. Ensure latest version of Activesync v4.xx is installed on PC/laptop.
3. Connect Dopod 838 to PC/laptop.
4. VERY IMPORTANT! - Ensure the Dopod 838 is connected properly to the PC/laptop.
5. Make sure the battery is charged to at least 50%.
6. Double-click on the .exe file to run the update utility
7. VERY IMPORTANT! - All data and software previously installed will be lost after the update. Please backup the data first.
8. Please close all programs when running the update utility.
9. VERY IMPORTANT! - Do not unplug the device when the update process is running, doing so may damage the device.
10. After updating, the device will reboot, this is normal.
Hi.
I want to upgrade my equipment to WM6 but i don´t know how to.
I´m a newbie so all the help are welcome.
The ROM version is : 1.30.77 WWE
ROM date : 02/20/2006.....
Radio version : 0.00.00 ( isn´t this strange ? )
Protocol version : 42.37.P8
ExtROM : 1.30.9010
That´s my device information above so what i have to do?
Where i can find a ROM that fully supports WM6 and of course that´s compatible with all functions that my phone has ( videocall for example ).
Many thanks to you all.
Regards from Portugal.
HI!
I asume that you have an UNIVERSAL (JasJar, qtek 9000...)
-1 download the ROM that you want.
-2 press light button + power button and then reset device.
-3 go to Activesync's connections settings and then UNcheck "allow USB connections".
-4 connect your device to you computer with USB cable (of course) and then double click (in the rom that you download) in "ROMUpgradeUt.exe" or "MaUpgradeUt_noID.exe" (this one is better).
Follow the instructions ok?
The WM6 have trouble with videocall in this device and have a lot of bugs but you can test this one: http://forum.xda-developers.com/showthread.php?t=312519
I hope this help but search in the forum because this threat is solved already...
Hi,
I have 2 problems:
1. I flashed my mda3 from WM2003 to wm6. Unfortunately I forgot to activate my ExtROM. Is it possible to acitvate it now?
2. I flashed my mda3 with HELMI_BA_WM6_R0_.exe (CE OS 5.2.1620 (Build 18125.0.4.2). Now I want to upgrade to WM6 Pro CE OS 5.2.1933 (Build 18533.0.7.0) Updated [30.11.2007] but it doesn't work. Have anyone an idea?
THX
Gooffey
1. Activate ExtROM? Have you ever read the wiki?
You can resize your storage, but extrom is gone - there's no need to have one in WM6.
If you are attached to your ExtROM, create ExtROM folder in your SD card.
2. Yes, YOU WILL NEVER BE ABLE to upgrade to this version because of your "doesnt work" error message
Hi all.
I start by contemplating the fact that there are quite some portuguese members arround.
Força Portugal
I just got hold of a O2 Xda Orbit. It has windows mobile in english and I want to put it in portuguese.
I don't know how
I have been reading about the ROM's in portuguese but I am afraid of just upgrading without knowing what I am doing.
That is why I am now requesting you guys to point me in the right direction
Device Information:
ROM Version: 3.4.206.2 WWE
ROM Date: 4/18/2007
Radio Version: 02.67.90
Protocol Version: 4.1.13.28
-
Also I don't have (yet) ActiveSync installed on my computer... do I need it?
thank you in advance...
Tiago Geada
cusco
Brief step by step plan
vigaro said:
Hi all.
<question>
ROM Version: 3.4.206.2 WWE
ROM Date: 4/18/2007
Radio Version: 02.67.90
Protocol Version: 4.1.13.28
Also I don't have (yet) ActiveSync installed on my computer... do I need it?
cusco
Click to expand...
Click to collapse
You do need ActiveSync for XP or older, or Windows Mobile Device Center for Vista (download the latest version from Microsoft).
In general you have to do the following steps:
1. Connect your Artemis to the computer using a USB cable.
2. Do NOT make a partnership. If you get a wizard or popup, just cancel/quit it.
3. obtain the rom of your choice (it sounds like you've allready found a PTG rom)
4. make sure your Artemis is CID unlocked. If not, use artemis USPL for this.
5. run RUU.exe or RomUpdateUtility.exe which is usually provided with the rom. If not, find a recent version HERE. If you use a RUU.exe not provided with your rom, just remove the old rom (a large file with the extension .nbh) and put your rom in the folder with RUU.exe
6. Follow steps on the screen. Read the information / caution rules, press next a few times, then press update.
7. The Artemis will go into boot loader mode (first a three color screen, then a grey one with a white/blue progress bar)
8. wait some time, until the wizard says you're finished
9. The Artemis will reboot. Wait for it to completely start windows, then do a hard reset (push both softkeys and the reset button, release reset button after a few seconds). This way you make sure your rom gets flashed well
10. Wait for the progress bar to end again and for windows to start
11. Start calibrating your screen and customising windows to your needs.
This should do it