at first i am not expert...but i want to tell u to i can flash rom by xdarit xdaool ....by *.nb1 *.nbf fixbootloader .. by no have a problem........ by read in this site... i flash rom more than 50 times : ) at my own O2
yesterday i buy secondhand from seller......... to give it for my wife because her birthday present
no luck vibrate is not use and i didn't check infared because i never use it........ but case ias very new likw a new model that make me decide to buy
when i come back to home i open it and that show my rom is.... xda ser12 radio 4.17 Wallaby 5.17 can talk...internet ..all of function ok
then i upgrade radio to 4.21 with no problem and next step i downgrade 5.17-5.15 by bootloaderfix...that no problem wallaby 5.15 already....
i burn rom 4.00.11 Nk.nb1 cook from makis kitchen ( that alway success everytime when i flash rom ) but when write to sd that show message
cannot write because I/O error that make me funny because i use this rom in 2 days ago...i try again and same....... may be change rom i think....
1.and i flash rom 4.01.00 Nk.nbf by xdarit to sd and put to my O2 and wait until finish..... hard reset.... but that hank on boot screen this rom tet only not for sell
2.i try to second time and i flash rom 4.01.00 Nk.nb1 by xdatool to sd and put to my O2 and wait until finish.....check sum ok hard reset.... but that hank on boot screen this rom tet only not for sell again and show current rom+radio+32S54
3.same as 1-2 but in wm2003 rom again and again 4.00.05
4.same as 1-2 but in wm2003 rom again and again 4.00.16
5.same as 1-2 but in wm2003 rom again and again 4.00.21
6.same as 1-2 but in wm2003 rom again and again 4.01.00
7.same as 1-2 but in wm2003 rom again and again 4.01.16
8.same as 1-2 but in wm2003 rom again and again 4.00.11
9.same as 1-2 but in wm2003 roma gain and again 4.00.33
10.same as 1-2 but in wm2003 roma gain and again 4.0021
( also in wallaby 5.15 5.17 5.22 6.22 ) because i have patch 5.17 and 6.22 aleady ( and use with xdarit xdatool )
what happen ?????? i hank on boot screen when finish all of rom 2003 of i have but in 2-3 days agos that work
then decide to flash rom to 3.17.03 ppc2002 Nk.nbf / Nk.nb1 ................ that success........ but when i press infared recieve... that hank and i will reset it.... at everytime to press it ... i delete it in windows/start menu /program.... and sometime my O2 is hank...
then decide to flash rom to 3.20.06 ppc2002 Nk.nbf / Nk.nb1 ................ that success........ but when i press infared recieve... that hank and i will reset it.... at everytime to press it ... i delete it in windows/start menu /program.... and sometime my O2 is hank...
and another rom in 2002 is ok all of rom............. ??????????
i download rom again with makis and lumpistefan with both and save as 4.00.11Nk.nb1.makis 4.00.11Nk.nb1.stefan
download in 10 type of rom in nb1 and Nbf
i flash to 2003 again and same 1-10 step that i write............................but in 2002 rom that no problem
Please somebody tell me..... what happen with my wife O2 ..... i cannot flash rom to 2003 but 2002 it work only Unbelievable
i will come back to home and borrow my O2's friends to test flash rom in this eveninig ( this time 15.00 in thailand ) and will post again
Any idea ????? what happen ???
Have this same problem before ? ... because i seach it and cannot find.....
Now ... i use this
Version
Rom version : 3.20.06 ENG
rom date : 07/30/03
Radio version : 4.21.00
Protocal vesion : 32S54
Hardware
CPU : ARM SA1110
speed : 206Mhz
Ram size : 64 MB
Flash size : 32 MB
Flash chip type : 28F128
Databus : 32 bits
LCD : 240x320 TFT
colors : 4096
Indentity : PW10A1
Platform : Pocketpc
IMEI: : 350312001214712
PLEASE SOMEBODY HELP ME ............................
sorry in very bad english.........
Have you tried using a different sd card for flashing?
successfully to upgrade im wm2003 again
yesterday i go to repair infared...and come home to try again........ that can upgrade in all of rom in wm2003 or 2002 ... ... ???
why did broken infared make me to 2002 but for 2003 not ..... ? any idea ?
Related
Can anyone help me please!!!
I need to upgrade my Qtek 1010 PPCPE 2002 to WM 2003.
Current ROM ver 3.18.04 ENG
Radio Ver 4.21
Model no: PW10A1
Please help me how to go about for the upgrade!!
Thanks
Mushtaq
if u do a simple search here u will never imagine how many times this topic has been answered
Upgrading Qtek 1010 to WM 2003
Hi Biso007!!
I have read most of the forum for this answer.But its confusing with ROM ver like starting is A then numbers,were as some are 4.01 and so on.Which one I have to chose ?Which is more stable?Where did you get your Radio version?Is there any easiest way to upgrade.
Please help,it will be appreciated.
u can use any WM2003 ROM and i may recommend T 4.01.00 as it's very stable for me.
as for the RSU, ur device is A type, works only for 900/1800 MHz ... don't ever put TMO radio stack as it's meant for B devices with 900/1900 MHz
Don't touch the RSU as long as it works fine.
Upgrade Qtek 1010 to WM 2003
Thank you for reply.But from wehre i can download this ROM T 4.01.00 ENG .Can install this as EXE file through USB cradle,i dont know how to do with other methods.I have Upgrade utility 2.07 which mentions
Pocket PC 2003 Phone Edition Software upgrade release notes
Overview
This upgrade will install the Pocket PC 2003 Phone Edition Software and update the wireless capabilities and other software on your T-Mobile Pocket PC. You should install the upgrade if you have a software version earlier than:
ROM version: 4.01.16
Radio version: 6.25.02
Can Install this,will this install also Radio version by default?
Usually the operator release contains both RSU and ROM update ... so, don't use it unless with the proper device ... which is not your case.
You can cook your own ROM from the kitchen ... you can cook it as a simple EXE file or you can cook it as .nbf file if you have SD card.
Good luck
Upgrading Qtek 1010 to WM 2003
I realy appriciate your help.I have read in some forum that Upgrading ROm through USB cradle ie. EXE file will damage the Qtek 1010.Is that true.I have SD card 64MB how can use that.
Thank you so much
yes a 64mb sd is ok
read about getting the rom to the card
http://wiki.xda-developers.com/wiki/XDAtools
There is no procedure on how to install through SD card.I need the procedure to install WM 2003 ROM to Qtek 1010
try the program the dropdown box have an options called SDcard
if you pick your nbf file as source and sd card as distination then there really is nothing more to it
I have selected now
Source: Device memory from Dropdown
Destination:Nk.nb1
I have just tried.is that right,as i tried before with SD card it did not copy anything
Source: Device memory from Dropdown
Destination:Nk.nb1
Click to expand...
Click to collapse
will backup your current rom
source is where the data is comming from
and distination is where it's going
if you picked sd as source then it will not work because
your sd card dont have a rom on it already i asume
i had selected destination SD card but never copied now i typed in destination nk.nb1 in my hard disk.Also in ROM Kitchen what type of ROM i have to build EXE or nk.nb1(SD flashing Method) What is NBF header string?
I have new ROM its in exe can i run this?
Log file is created for WM 2003 ROM 4.01.16
write xip block starting at 81740000, with 5 fileswrite xip block starting at 81c00000, with 31 filesthis rom seems to be 4.01.16 ENG 2004-02-04 T-Mobile WM2003this bootloader seems to be V5.22 2003-05-15 17:46:55no operator rom found80000000 - 80040000 -- bootloader 0 files 1 modules80040000 - 8015f05c 9 XIPKERNEL 5 files 5 modules80180000 - 80377290 8 KERNEL 10 files 14 modules80380000 - 8064b390 7 OS 20 files 36 modules80670000 - 80be3608 6 SHELL 107 files 88 modules80c00000 - 8102dea0 5 BROWSING 11 files 36 modules81050000 - 813f06f4 4 COREAPPS 96 files 44 modules81400000 - 815d31a4 3 EXAPPS 34 files 7 modules815f0000 - 8171cda8 2 PHONE 57 files 19 modules81740000 - 8177ffc0 10 XDA_DEVELOPERS1 5 files 0 modules81780000 - 81781c34 -- xip chain 11 xip entries817c0000 - 81bfe33c 1 MISC 213 files 42 modules81c00000 - 81d1e550 11 XDA_DEVELOPERS2 31 files 0 modules81ec0000 - 81ee5800 -- bitmap : 101a301a .. beb6fc8d adding: NK.nb1 (deflated 45%)
Now should i select nk.nb1 or exe type
Please help if SX 56 Siemens Upgarde can be used for Qtek 1010.I need to upgarde my Qtek 1010 to WM 2003
Thanks
yes the rom of one Wallaby can be used on any Wallaby device
but make sure you dont upgrade the radeio stack unless you use
the same gsm network that the radiostack from SX 56
which i'm pretty sure is 900/1900
if you dont use that gsm network you have to change
the exe file to zip and copy the nbf fil inside it out and update it
using xdatools
if you just use the selfflash exe then you'll end up with a xda which only work on the US gsm network
SX56 WM2003 update aupgrades the radio stack automatically, so you may not get an option to forego radiostack upgrade
well not sure about the 56 Siemens upgrade
but with the tmobile upgrade i just renamed the extention
to zip and extracted the nbf file as i would have from any other
zip file
it were no problem at all
of cause i dont have a clue about how siemens handled their upgrade
SX56 Upgrade for Qtek 1010
Taimur said:
SX56 WM2003 update aupgrades the radio stack automatically, so you may not get an option to forego radiostack upgrade
Click to expand...
Click to collapse
Taimur,
I did it for my Qtek 1010 (I live in the UAE). You are right, if you run the application SX56 Upgrade it will try to upgrade both RSU and RUU. I didn't want to upgrade Radio Stack. I used WinZip and extracted NK.NBF file, used Jeff's XDATOOLS (available somewhere on this forum) and transferred it to the SD Card. Then safely used Bootloader method to flash the ROM.
I am very very satisfied with the SX56 wm2003 upgrade. Except for the multiple reset bug, I have not come across any other problem, and I don't need to reset the device often. It's quite stable. It is the upgrade that I have stuck with for the longest
By the way, using Activesync method to flash ROM is very dangerous (Thanks to Windows), and I almost killed my Qtek while attempting it once! Thankfully with the help from ntabikha I managed to salvage it and never since used activesync to flash Rom.
Hi!
I have SX56, it is alive again with original AT&T ROM RUU A 20.17.
But I can NOT upgrade it to 2003 using SD-card and SD-card reader/writer.
I test a lot of building of 2003 updates, but after write I see only start screen with info:
Wicrosoft Pocket PC 2002
some info about new version of rom
But item stop and dont boot. But if I write original AT&T ROM RUU A 20.17.
- all is fine.
My boot loader is 5.22
Additional info:
1) During software upgrade through ActiveSync it stop at 46%
2) If I am using SD-card my upgrade stop at:
PRG: 00F00000
END: 02000000
People, help me, what I need to do? :? :? :?
I Can't Upgrade the Radio ROM 1.04 .
I GOT ROM at :
ftp://[email protected]_XDA_IIi_Upgrade_v1.11.162_Radio_1.04.rar
Upgrade Status:
step 1 is OK (radio)
Step 2 is OK (EXT):
Step 3 to 8 % PC show : Error 112: CE ROM UPDATE ERROR
WHY???
i run the MaUpgradeUt_noID.exe many Time.
result is same error at 8% Error 112: CE ROM UPDATE ERROR
even i change the PC.
XDA stop at 8%(can't continue)
should i STOP MaUpgradeUt_noID.exe at 8% Error OR keep MaUpgradeUt_noID.exe runing at 8% and run MaUpgradeUt_noID.exe again?
but result is same ,stop at 8%
MY XDA IIi(dopod699) Before Upgrade
ROM version: 1.11.06CHT
Radio version: 1.03.00
ExtROM version: 1.11
Finally,i take my XDA IIi to HTC Using hardware put Rom back.
XDA IIi back and good.
but i curious about why I Can't Upgrade to radio 1.04.
So i try it again.
and "Step 3 to 8 % PC show : Error 112: CE ROM UPDATE ERROR" again!!! :evil:
PLEASE HELP ME
Can i write NK.NBF(use ntrw.exe ) to SD Card ??
and Use SD Card Restore the XDA Rom??
somebody can Tell me, Can i do this??
yihchyuan said:
Can i write NK.NBF(use ntrw.exe ) to SD Card ??
and Use SD Card Restore the XDA Rom??
somebody can Tell me, Can i do this??
Click to expand...
Click to collapse
Surf on Forum today.
I KNOW THIS WAY CAN'T WORK!!
BECAUSE nbf is different FROM nb1(CE ROM)
But, who have rom tool(like xdatool for Alpine) to convert nbf to nb1 ??
So i can write NK.NB1(use ntrw.exe ) to SD Card.
and Use SD Card Restore the XDA Rom??
PLS tell ME!!
I LOST my XDA IIi many day !!
my friend in HTC Say:FLASH chip maybe defective in MY XDAIIi
So i must Repair My XDAIIi
Which Windows have you got?
I had a simillar problem with upgrading XDA IIs on Windows XP, it didn't work until I installed SP2 version, after that, upgraded without problems.
my PC OS is win xp sp2 AND i try Upgrade on 3 different PC.
1: windows 2000 server
2: win XP sp2 compaq notebook
3:win XP sp2 IBM notebook
ALL PC upgrade XDAIIi Rom fail at CE Rom 8%.
THANKS YOUR RELAY! :lol:
finally Change XDAIIi main board .
i can upgrade radio Rom
thanks !!
after i try so many time, finally i can use WM2003 for my siemens SX56
i use WM2003final, bcause WM2003SE always stuck (look my attacment), can anyone unlock that? and my signal a little poor,any suggestion?...
Now mine is :
Microsoft Pocket PC
Version 4.20.0 (Build 13252)
1996-2003 Microsoft Corporation
ROM version : 4.01.12 ENG
ROM date : 12/22/03
Radio versin : 6.24.00
Protocol version : 324e4
*but when i restart my pda always show "error : this program only works with Windows Mobile 2003 (4.20.1081)".
i cook at http://www.romkitchen.de/ , i choose : WM2003 ROMs : 4.01.12_ENG.exe
I think you have choosed the "Fix 'multiple resets make device slow' bug " Option for cooking the ROM....
Just remove the wm03hotfix.exe file that is located in the Windows\startup directory....
Then this error shouldn´t appear any more until you make a hard reset of your device, that will restore the ROM including this file....
Stefan
not appear again
thanks for the advice...
only can delete wm03hotfix.exe, at
\Windows - \StartUp
Cannot delete wm03hotfix.exe at
\Windows ... (attch)
also when i wan to delete directly from my device, still cannot??
but thanks anyway,he3..now "error : this program only works with Windows Mobile 2003 (4.20.1081)" not appear again
thank you Mr.LumpiStefan