Can't upgrade SX56 from 2002 to 2003 - MDA, XDA, 1010 Software Upgrading

Hi!
I have SX56, it is alive again with original AT&T ROM RUU A 20.17.
But I can NOT upgrade it to 2003 using SD-card and SD-card reader/writer.
I test a lot of building of 2003 updates, but after write I see only start screen with info:
Wicrosoft Pocket PC 2002
some info about new version of rom
But item stop and dont boot. But if I write original AT&T ROM RUU A 20.17.
- all is fine.
My boot loader is 5.22

Additional info:
1) During software upgrade through ActiveSync it stop at 46%
2) If I am using SD-card my upgrade stop at:
PRG: 00F00000
END: 02000000

People, help me, what I need to do? :? :? :?

Related

WM 2003 on XDA, Easy as 123...

For all the UK xda 1 users out there, here is a very simple way to upgrade your rom to wm 2003. This is using the siemens SX56 rom from
http://www.my-siemens.com/MySiemens...addon_SX56POCKETPCPHONE_12444_5856_DA,00.html
1. Download xdatools from this site.
2. Download the siemens rom from the above link
3. Backup your contacts/calender
4. Remove your SD card ( I managed to kill mine playing with XDAtools )
5. Extract the siemens stuff ( c:\program files\SX56 upgrade utility )
6. Browse to the above folder and double clik the NK.nbf file.
7. XDAtools will pick it up and take you through the upgrade.
Two hardware resets and you have wm 2003 on your XDA.
My radio stack is 4.21 upgraded from the o2.co.uk site. I am also with Vodafone. It all seems to work perfectly. Hope this was the way to do it though.
NOTE : DO THIS AT YOUR OWN RISK - o2 UK WILL NOT SUPPORT THIS !
I TAKE NO RESPONSIBILITY !
So two weeks later and whats the prgress?
felt like having some fun with one that was laying around the office.
Not impressed with the device so far I had to reset it the other day no reason and it completely emptied itself of data in the meeting (nice!)
does the 2003 upgrade remember anything more that the 2002 version?

SX 56 Upgrade can be used for QTEK 1010?????

Please help if SX 56 Siemens Upgarde can be used for Qtek 1010.I need to upgarde my Qtek 1010 to WM 2003
Thanks
yes the rom of one Wallaby can be used on any Wallaby device
but make sure you dont upgrade the radeio stack unless you use
the same gsm network that the radiostack from SX 56
which i'm pretty sure is 900/1900
if you dont use that gsm network you have to change
the exe file to zip and copy the nbf fil inside it out and update it
using xdatools
if you just use the selfflash exe then you'll end up with a xda which only work on the US gsm network
SX56 WM2003 update aupgrades the radio stack automatically, so you may not get an option to forego radiostack upgrade
well not sure about the 56 Siemens upgrade
but with the tmobile upgrade i just renamed the extention
to zip and extracted the nbf file as i would have from any other
zip file
it were no problem at all
of cause i dont have a clue about how siemens handled their upgrade
SX56 Upgrade for Qtek 1010
Taimur said:
SX56 WM2003 update aupgrades the radio stack automatically, so you may not get an option to forego radiostack upgrade
Click to expand...
Click to collapse
Taimur,
I did it for my Qtek 1010 (I live in the UAE). You are right, if you run the application SX56 Upgrade it will try to upgrade both RSU and RUU. I didn't want to upgrade Radio Stack. I used WinZip and extracted NK.NBF file, used Jeff's XDATOOLS (available somewhere on this forum) and transferred it to the SD Card. Then safely used Bootloader method to flash the ROM.
I am very very satisfied with the SX56 wm2003 upgrade. Except for the multiple reset bug, I have not come across any other problem, and I don't need to reset the device often. It's quite stable. It is the upgrade that I have stuck with for the longest
By the way, using Activesync method to flash ROM is very dangerous (Thanks to Windows), and I almost killed my Qtek while attempting it once! Thankfully with the help from ntabikha I managed to salvage it and never since used activesync to flash Rom.

!!!BIG PROBLEM DURING UPDATE!!! HELP!!!

Hi!
I have Siemens sx56 and want to upgrade to Windows Mobile 2003.
I can NOT find update at Siemens (Siemens doesn't support Update 2003 any more).
I find out this update in Internet: ruuv2.09c_cer.30.07wwe_rogers(integrategprsa.33.03).exe
Then I try to update my PDA, but I can't do it because incompatible version of this update to my installed.
Than I use adaptROM.exe and begin updating...
1. I answer all question
2. I successfully update radio
3. I begin ROM-update
4. Upgrading stop at 46% and I see Error message in my PC and PDA
5. I follow instruction: 1. Unplug USB 2. Soft reset PDA 3. Plug USB
6. After that I have error at 46% again
Please, Help! What I can do?
http://forum.xda-developers.com/viewtopic.php?t=10698
this guide here is the safest way to upgrade ones xda
I have no SD-card and haven't SD-card writer.
Who can help me?
Who can sell SD-card with proper ROM to repair dead PDA?
you can get a sdcard reader for about 10$
and a 64MB sdcard for about 15$
Rudegar said:
you can get a sdcard reader for about 10$
and a 64MB sdcard for about 15$
Click to expand...
Click to collapse
Thank You for help and advices.
One more (believe the last :wink: ) question: what ROM files (version) I need for my Siemens SX56?
what version you like the higher number the newer the rom
i would prob go http://lumpistefan.dyndns.org/
and get this rom
A.30.09 ENG
Rudegar said:
what version you like the higher number the newer the rom
i would prob go http://lumpistefan.dyndns.org/
and get this rom
A.30.09 ENG
Click to expand...
Click to collapse
Visit that site, but when I click on URL: http://www.geocities.com/s_k_s_k_s_kru/util.html#ss
I get:
"Sorry, this site is temporarily unavailable!"

Unable to downgrade and problem with PPC 2003 for o2 Xda

I've got a lot of problem with my O2 xda.
I have instal windows mobile 2003 SE, found in the roomkicthen from lumpistefan (rom version 3.04.00 eng). I would like to downgrade to PPC 2002 but I can't. When I start the programme A from O2 it said it's the wrong model of PPC: it said I've got a PW10B1 model but it's written in the back of my ppc that it is a PW10A1. How can I downgrade so. I try to launch adaptrom but it didn't start good on my PC. I download Osi image tool but i can't transfert the Nbf file to a sd card, in all type of file possible.
PPC 2003 erase all I have on my Sd card after a While ( 3hours-1day). Where did it come from?
I didn't found sim toolkit on my ppc, have I to instal something else?
How can I set by default the option "request message delivery notification" in text message?
Thank you
Try one of these ROMs for downgrading....
http://wiki.xda-developers.com/index.php?pagename=ROMVersions
WM2003 erasing SD-Card is an old problem. In my kitchen is an unprooved patch for this problem. I had this problem just once and have used the WM2003 for about 1 1/2 years....
Permanent SMS delivery Notfication could be done by inserting
Code:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
"SMSDeliveryNotify"=dword:00000001
in the registry....
HTH
Stefan
Thank for your help. It work for the permanent delivery notification
I can't download now and I wil try to downgrade after vacanty
Try one of these ROMs for downgrading....
http://wiki.xda-developers.com/index.php?pagename=ROMVersions
WM2003 erasing SD-Card is an old problem. In my kitchen is an unprooved patch for this problem. I had this problem just once and have used the WM2003 for about 1 1/2 years....
Click to expand...
Click to collapse
So what should I do? I should download WM2003SE from http://wiki.xda-developers.com/index.php?pagename=ROMVersions or cook from http://lumpistefan.dyndns.org/? :-(
Cheers,
Depends on you. Thr ROMs here on ftp / wiki are all the "clean" versions. If you want to have aditional software in it, you have to cook your own one....
Stefan
I ve install ppc 2003 from wiki. But now I haven't any mms composer, registry editor and a good wap browser. Wich software can I use?

HELP Can't Upgrade Radio ROM 1.04

I Can't Upgrade the Radio ROM 1.04 .
I GOT ROM at :
ftp://[email protected]_XDA_IIi_Upgrade_v1.11.162_Radio_1.04.rar
Upgrade Status:
step 1 is OK (radio)
Step 2 is OK (EXT):
Step 3 to 8 % PC show : Error 112: CE ROM UPDATE ERROR
WHY???
i run the MaUpgradeUt_noID.exe many Time.
result is same error at 8% Error 112: CE ROM UPDATE ERROR
even i change the PC.
XDA stop at 8%(can't continue)
should i STOP MaUpgradeUt_noID.exe at 8% Error OR keep MaUpgradeUt_noID.exe runing at 8% and run MaUpgradeUt_noID.exe again?
but result is same ,stop at 8%
MY XDA IIi(dopod699) Before Upgrade
ROM version: 1.11.06CHT
Radio version: 1.03.00
ExtROM version: 1.11
Finally,i take my XDA IIi to HTC Using hardware put Rom back.
XDA IIi back and good.
but i curious about why I Can't Upgrade to radio 1.04.
So i try it again.
and "Step 3 to 8 % PC show : Error 112: CE ROM UPDATE ERROR" again!!! :evil:
PLEASE HELP ME
Can i write NK.NBF(use ntrw.exe ) to SD Card ??
and Use SD Card Restore the XDA Rom??
somebody can Tell me, Can i do this??
yihchyuan said:
Can i write NK.NBF(use ntrw.exe ) to SD Card ??
and Use SD Card Restore the XDA Rom??
somebody can Tell me, Can i do this??
Click to expand...
Click to collapse
Surf on Forum today.
I KNOW THIS WAY CAN'T WORK!!
BECAUSE nbf is different FROM nb1(CE ROM)
But, who have rom tool(like xdatool for Alpine) to convert nbf to nb1 ??
So i can write NK.NB1(use ntrw.exe ) to SD Card.
and Use SD Card Restore the XDA Rom??
PLS tell ME!!
I LOST my XDA IIi many day !!
my friend in HTC Say:FLASH chip maybe defective in MY XDAIIi
So i must Repair My XDAIIi
Which Windows have you got?
I had a simillar problem with upgrading XDA IIs on Windows XP, it didn't work until I installed SP2 version, after that, upgraded without problems.
my PC OS is win xp sp2 AND i try Upgrade on 3 different PC.
1: windows 2000 server
2: win XP sp2 compaq notebook
3:win XP sp2 IBM notebook
ALL PC upgrade XDAIIi Rom fail at CE Rom 8%.
THANKS YOUR RELAY! :lol:
finally Change XDAIIi main board .
i can upgrade radio Rom
thanks !!

Categories

Resources