I am not sure want i did wrong with my XDA 1, but now, it just stays in Wallaby Bootloader V5.22.
i've tried soft / hard reseting it, also tried flash the rom through SD-Card, but still no joy.
i really dont no wat to do now, but please please i hope someone out there has some advise for me to over come this.
Dal
Topic moved to this forum
daljitbanga said:
I am not sure want i did wrong with my XDA 1, but now, it just stays in Wallaby Bootloader V5.22.
i've tried soft / hard reseting it, also tried flash the rom through SD-Card, but still no joy.
Click to expand...
Click to collapse
What happens when you try upgrading via SD-Card? How do you copy the ROM to the SD-Card?
Have you checked your power button? maybe is malfunction, so that you enter all the time to the bootloader...
Stefan
Related
Anyone have rom PW10B1, i tried to use adaptrom but until step 4 everithing stop and my XDA screen becomes hang (white screen) I need to know how to solve this problem because i can't access my bootloader..i want install PPC2002 3.17.03 version.....please help......
I had exactly the same problem using 'PW10B1'. In the end I decided to upload the ROM via the SD card..everything worked fine then.. not sure what the problem is though or how to solve it.
How to upload
Hai gdavies100,
You can access the bootloader ? i tried push power botton and do soft reset in the same time but show only OZONE on my screen. If you solved already the problem like this please let me know step by step how to do it. Thanks for your repply.
Dear all
i just have regitered over here after i tried alot with shop's over here to change the language of my T mobile MDA from GER to ENG
i searched all the forum to find out where i can get ENG ROM and the correct way to falsh it with USB cable ... am not expert to flash it in bootloader mode
Can any one help me please out here ?
Thanks in advance for all
http://lumpistefan.dyndns.org/ - all versions, languages + couple of nice progs that can be optionally included straight in ROM - make your RAM free! :lol:
Thanks alot bob190cm but am looking for the orginal latest version for my PDA
Thanks man for your effort
tmobile's uk site would prob be a good place to start looking
2 sunpower:
Actually, if you unmark "Add software and modify ROM" option, you get the original ROM - 4.01.16 ENG is the official T-Mobile release of WM2003...
Man i downloaded the 2003 ROM and tries to upgrade my PDA but it killed it ... ActviSyn does not recognize it any more
what do i have to do now do i have to try the bootloader way ?
if yes what do i need to do it and how ?
Have a look around that forum.
Now I can tell you this: activesync will not recognize it - simply try running the update again. If doesn't help - see forum for exact instructions how to run the SD update.
PS: what actually happened?
I made a 2003 rom for my XDA I T mobile device i tried to upgraded it but it hangs up and a mseege appared asking me to soft rest my device and try the operation again ... now ActiveSyn not connecting to the device and i dont have an SD my Bootloader is 5.25 is this loader is bad ?
Please advice.
Thanks
i forgot to ask you what is soft reset and hard reset ?
sunpower said:
i forgot to ask you what is soft reset and hard reset ?
Click to expand...
Click to collapse
A softreset is a restart of your device. You do it by putting your stick in the little hole down on the left side.
A hardreset performs a blank installation of the System stored in your Rom. All applications an data installed will be lost. You can do this by unsrewing your stick, putting the top in the little hole down on the right side, wait for about 60 sek. and do this again....
HTH
Stefan
You guys are wonderfull :lol: i got my XDA back by bootloader method .....
Hi have a slight issue with my Mini s, i believe its the wizard. When i go to send txt messages it tells me the phone is not ready and i have to wait 15 seconds, so i cant send msgs, i can still ring in and out, also when i try to go to phone settings it tells me to wait 15 seconds and try again, when i go to sim manager it tells me to again, wait! I believe at the moment it is flashed to 02 with an orange sim in it, its the G4? version. Its running wm5 i think, if i could have it flashed to orange on wm6 that would be great.
Any help on how i can overcome this problem would be great. Thanks
Matt
Perform Soft Reset first,check if it solves the problem, or Hard Reset,but remember you'l llose all your personal data by doing hard reset,but it might solve the problem.If nothing works,than its corruption of the extended_rom,you might have to reflash a rom.
To upgrade to wm6 read the guide posted here at xda-wiki ,be careful,if you say its a G4 device,its a bit sensitive device:-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
rite ok ive already tried a soft reset but it didnt work, sorry i havent got a manual for the phone so how do i do the hard reset? also if so how do i reflash the rom, any guidance would greatly be appreciative.
Thanks
Hard Reset
Hardreset for Wizard is by pressing: Comm button + Voice command button and slightly push the softreset button with stylus.
Guide to flash a rom is posted in my above post.
you should reflash your rom I also has same issue and reflashing solved the problem.
my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Your phone can be reflashed with Mtty even when it freeze on the boot screen cause its not necesary have the phone ON.
Tried to do a hard reset maybe is a windows registry problem.. after the hard reset the values on registry will be reset to default.
already done that, and doesnt work, even it reflashes through USB but afther reaching 100% the phone restarts and get stuck again in the same place, no matter if I hard Reset or reflash by USB the phone still get freeze.
can any one tell me how to delete all the data on the memory to make a clean reflash? or how do I reupload the firmware? is there a way to recover the phone?
remember I already install the WM5 and back to WM2003SE but after that the problem started, maybe i screw someting wile doing it?
Solaris_irc said:
my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Click to expand...
Click to collapse
Tutorial for sd flash
Check here
Hi everyone got a bit of a problem and would appreciate a bit of help , My acer s200 is unresponsive now , no blinking lights, nothing. I was in the middle of updating to ROM - English 3.003b.00.EN when it got accidentally disconnected.
I have had a look on the forum but had not luck finding anything that will help me out.
Any help would be apprerciated please.
tmmv1 said:
Hi everyone got a bit of a problem and would appreciate a bit of help , My acer s200 is unresponsive now , no blinking lights, nothing. I was in the middle of updating to ROM - English 3.003b.00.EN when it got accidentally disconnected.
I have had a look on the forum but had not luck finding anything that will help me out.
Any help would be apprerciated please.
Click to expand...
Click to collapse
hard reset the device and take it to go back to the bootloader mode, then flash rom again
try to follow the guide to flash rom http://forum.xda-developers.com/showpost.php?p=6138942&postcount=4
Hakim Rahman said:
hard reset the device and take it to go back to the bootloader mode, then flash rom again
try to follow the guide to flash rom http://forum.xda-developers.com/showpost.php?p=6138942&postcount=4
Click to expand...
Click to collapse
Thanks Hakim Rahman for the reply and link. I have 2 more questions what is the best way to hard reset the phone please? I have seen quite a few different ways to do this which i have followed with no luck as of yet. Also what is the best flash rom to use?
I have tryed to hard reset using the methods below which i think is the correct methods but still my screen is dead
Method 1. "Reset by pressing button combination Hold the Volume up and Volume down buttons while pressing reset until the screen shows “Clean Boot”.
And this way
Method 2. Hold vol up and vol down and press power.
Anyone please point me in the rite direction for the hard reset that will actually work please?
tmmv1 said:
Anyone please point me in the rite direction for the hard reset that will actually work please?
Click to expand...
Click to collapse
seems correct, but to make sure you try to look at http://www.hardreset.eu/acer_s200_hard_reset_soft_reset_en.html
Thanks once again for your reply and help Hakim
My phone has nothing happening at all it is completely dead, the battery was charged before it went off so i know that is still charged. I can't believe all i done was caught the wire and it came out of my phone while i was updating it to the latest Rom that i downloaded from Acer So will the hard reset still work even though nothing is coming on at all on my phone? The phone at the moment does not even light up Surely it can't be broken all together can it?
please help me, my acer s200 is stuck in clean boot. i need to install a new rom but i dont know how and i dont have a new rom. please help me i need an english rom. my email is [email protected]