Database Users

Smart dialling

Smart dialling is gone after BigStorage upgrade. Please - how can I get it back. I have installed the IntelliDialer, but it did not help...

Did you soft reset after installing?
V

Yes I did, no sign of Smart dialling...
I saw some screenshots somewhere with an options menu where you can turn smart dialing on, but I could not find such a menu...
The bigstorage is a good thing, but the smart dialling was better

afaik Smart dialing is a seperate application. I might be wrong though
Get your most recent cab here:
http://www.dmmh.nl/xda/files/sort/?device_id=1&category_id=9&submit=submit

Thank you so much. I saw your Rom indexing site before, but somehow could not find cabs for magician...
Great work!!!

many thanks dmmh, sorted my smart dialing too.
Thank you :lol:

Thanks, I went for SmartDialing_Magician_Generic_WWE_RC13.CAB
Is there anything else missing other than GPRS (i dont use it) after bigstorage?
Thanks

check out this post
hth
H4rry

thanks h4rry
i have a problem installing the file i downloaded.
i put the cab on the device and ran it from device.
i get: <the file "\windows\iacontacts.dll" is in use or is in rom...> error....
any advice on what i am doing wrong?
i run wisbar but tried it without wisbar and got same.

welcome people

@ sainthalo:
unfortunately I'm a total noob at this. So dunno the answer. But I presume you've tried soft reset and then installing the cab imediately. The cab I used was "Default_SmartDialing_Magician_RC13.CAB". This cab worked fine for me, no probs.
Other than that you'll have to wait for one of the experts round here to help you out. Sorry.
@ dmmh:

Arhh what is smart dialing?

hi dmmh,
ur link
http://www.dmmh.nl/xda/files/sort/?device_id=1&category_id=9&submit=submit
is not working. previously i remember downloading the smartdialing cab from this link. i need that cab. can u pls provide me a fresh link that works?
cheers...

Yep no luck with the link here either

Tom Tom on SPV M600?

Hi There,
Hope I am asking this question in the right place, I’ve searched through other posts but can’t find a definite answer so here goes….
I’ve downloaded a “Cra*k*d” version of the Tom Tom navigator 5 software. And having problems installing it.
If I copy the install files to an SD Card, and attempt to install the TomTom screen flashes up for a few seconds then disappears? Has anyone managed to get this working on this device (SPV M600)
Any help would be greatly appreciated
Thanks.
Gez

Got TomTom working perfectly fine on my M600.
But as you've downloaded a "Cra*k*d" version, I dont think I'm allowed to help you.

People have sucessfully used TomTom on the device, but I have no idea what your problem might be. Try another version or something...

Check the forum
I read somewhere here on what other people have done. You need to make sure there are certain folders installed on the device and then it should work.
I cannot be sure, but you need to have a folder called 'tomtom' in the root of the device and also one in your 'My Documents' folder.
Search for forum, as the answers are here somewhere!

You could try buying and then TomTom themselves would help you.
Other than that I think you need to be using v5.21

TheBrit said:
You could try buying and then TomTom themselves would help you.
Other than that I think you need to be using v5.21
Click to expand...
Click to collapse
Cheers the hunt continues!!!

Hoe to install TTN6

This question has probably been asked a thousand times allready.
How do you install TTN6 on to the wizard?
I have the original TTN6 CDRom with all the keys.
Any help would be greatly aprreciated?

put the cd in your drive

Ive obvioulsy tried that it will not let me install it

leeblease said:
Ive obvioulsy tried that it will not let me install it
Click to expand...
Click to collapse
It may help if you give some description of what it is, or isn't doing.
Just asking what may be wrong with no information is a bit vague.

Do you have active sync installed? If not download and install active sync first from microsoft. Second when you put the CD in your drive does anything happen? Third have you read the quick start guide that came with the software?

A little problem with instaling app

Hi i'm a newcomer and a little noob in this domain )
i have a qtek g4 s200 and i have a little problem: after instalin a app form my storage card or device my cab is missing, it is deleted i don't now what happens
pls who can help me with an answer
and another problem where can i find a touch commander for wm5 only the program not a new rom 10x a lot

Regarding ur 1st Q
Deleting The CAB file after install is normal in WM5. If u need the CAB after Install u've to keep a copy somewhere else

1th 10x i will remember
sorry for being such anoob but i'm learning

no problem

Pls a tcouch commander foe wm5
Help

Diamond block screen while phone call

Hi all!
You sure notice that the diamond normally lock the screen after very short time while performing phone call!
please let me know how can i dismiss or reduce that operation
b.t.w
I can not record phone call with the diamond becouse every time the diamond lock during phone call the voice recording application stop working and cut the call recording when the diamond lock it self!!!
thanks!!!

you could have searched. but your new so ill be nice. welcome to xda-dev and here is what you need!

Thanks but I installed that file and didnt see any progra that I can execute, where is the executable file of the program and how can I use it?
Thanks again!

Genesis 44:12

Folks!!!!
I can not see where is the executable of that installed file!!!
please please please tell me EXACTLY how to find it
THANKS!!

alon111 said:
Folks!!!!
I can not see where is the executable of that installed file!!!
please please please tell me EXACTLY how to find it
THANKS!!
Click to expand...
Click to collapse
there's no executable, the cab probably adjusted some registry settings.
check and see (after a soft reboot) if it works when making a call...

works fine,thanks

How can I remove that application / registry if i want?

Unsuccessful Installation of NoSleep!!.cab
Why i cant install ? Easily getting message Installation of NoSleep!!.cab was unsuccessful ... Any suggestions ????

Same here
Hi all, I've got my jewel for 2 days so... thanks very much for your utstanding work.
I have the same question: It works ok, but if I need to unistall it how can I do it.
Thanks in advance for your help.