Database Users

Caller to Picture BUG

I have bought the I-mate from Dubai and disabled arabic on it, the problem is that I cannot get the Caller to Picture option, I am assigning a picture to a certain contact,but nothing happens and if i use the preview buttom my phone freezes any help ???
Regards

I think that Caller2Picture does not work with WM2003.
Regards.

If you are talking about Photo Caller ID, then it is not working at all for any body :evil: ...

@ArcticCat:
You have to do a soft reset after assigning the picture to a person. That worked for me.

Photo Caller ID
yes i am talking about Photo Caller ID and it is not working in anyway

??? Has anyone MY|PHONE PROFILES ???

Has anyone this great app?
http://geocities.com/myppcpe2003/index.htm
Maybe a key for it?
I'D like to use it :twisted:
It appears to be the best prog that I've looked for to switch my XDA2 to a changeable caller profile phone like a nokia!

I liked this app initially, great interface and lots of functionality, however I found a few problems:
Sometimes after changing profiles the ring would be silent when it should be heard - the dialog would pop up showing the caller, but no sound.
You can set it to automatically revert to the normal profile after <n> minutes, or at a certain time. For me this only happened when the XDA was on - thus if it should have switched profile and then a call comes in before you have switched on the device it still uses the wrong profile.
If these problems can be sorted it would be a great app.
As for a key... go to PocketGear and but it!

Yeahh..So It's not a perfect software again.
Do you know any program that analyze the caller from the contacts and you can select for example just one number or one goup to receive? The other ignored or silent like Nokia phones.

I have come across MUTX RingToneX which allows you to set ring tones by contact or category so this may well give you what you want. Can't tell you how good it is, but you can get a free trial from the link below:
http://www.pocketgear.com/software_detail.asp?id=8675

Thx for the answer but I'm looking for an app with easy switching between sound profiles.
For example:
A) MODE
Every unknown number has RINGTONE1
FAMILY group has RINGTONE2
FRIENDS group has RINGTONE3
MY CARALARM SYSTEM (has a mobile calling function) has RINGTONE4
...etc.
B) MODE
Every unknown number is silent or ignored
Every other group than MY CARALARM SYSTEM is silent or ignored
MY CARALARM SYSTEM is ringing and answered (at night while I'm sleeping I want to receive just the call from my car's alarm system)
It's just a simple thing that a lot of phone's using. (Nokia & others)
I hope somebody understands my problem and knows an apllication with the ability I wrote above.
Thx

I think (not sure!) that you need a combination of two programs:
JGUI My Phone Profile AND IA Caller ID (OR Caller2picture)

Tekflow said:
I think (not sure!) that you need a combination of two programs:
JGUI My Phone Profile AND IA Caller ID (OR Caller2picture)
Click to expand...
Click to collapse
THanx the answer but I'm sure (not think) that I don't need the combination you wrote because My phone profile can switch just sound profiles with setting the ring volume or vibrating, IA caller ID can add a picture to a call, Caller2picture can add a ringtone and a picture to a call.
But I need what I wrote upper, please read it perfectly, because it is something different.
I need a software that has the ability to verify a caller-group and for example you can reject all number/call except the caller-group you set like with Nokia phones.
ANYBODY DOES UNDERSTAND WHAT I WANT???????
Maybe because I'm from Hungary and my english is not so well..... :?

My Phone Profile 3.1
My Phone Profile 3.1Full
Reg Code: TMPP-1177-JGUI
Have a fun!

If you have an XDA II, you don't need to get the IA Caller ID because it's already on the XDA II. IA Caller ID is called Photo Contacts in the XDA II.

Caller2picture can add a ring tone to a group. Whenever you want to reject a specific group, give it a silent ring tone.

@VHS: bad boy... i don't think that this should be made public... software worth using is worth bying.

hehe ...bad not bad, but apart from that a/m ...
discussion has been pretty much interesting to me as to sound profiles etc, I have been also looking for some time for software allowing for easen phone handling
regards and Happy New Year,
monika

Finger Clix
Check this:
http://www.imaginet-software.com/index.aspx?p=fingerclix_en
It is the best phone dialer ever!

thank you
I wolud give it a try
regards,
monika

:? :x :evil:
So..Nobody understands what I want.
OK.
Tekflow:
Thanx, but I know that I can set a silent ringtone for a group with one of these softwares. But I NEED SOMETHING DIFFERENT:
I have a car within a mobile-phone-alarm-system. If somebody does something with my car, this mobile (in my car) calls my mobile phone which is with me. So, usually (always) I switch off my phone by night. But if I switched off my phone I would never know my car's calling. That's why when I had a Nokia7650 I can set a profile called Night-profile which has the settings with all calls + all groups has a silent ringtone and my Car-alarm-number has a loud-sirene-ring. That caused when somebody called me except my car my phone was silent. When my car called it ringed with the highest level. And if somebody wanted to stole my car I had heard it. But not now. Because I don't want everybody to call me from 6 a.m., that's why I switch off my phone, but if I switch off my phone I can't hear if my car's calling me.
That's what I can't set in my XDA2.
With no any of your suggested programs.
I know all of them, and I know none of them has the ability I wrote upper.
SO........SOMEBODY UNDERSTANDS WHAT I WANT TO SAY SINCE DEC.05.???????????????????????????????????????????????????????
p.s.:I think so that FingerClix is the best dialling program for the XDA (I use it), but I need another thing, not just for dialling or to give a ring volume for all numbers and groups. My phone profiles can set just a general volume and vibrate settings without any choice to give a different volume for just one group or one phone number like Nokia.

(Maybe since dec.5 there's an update for MyPhoneProfiles or for the others and they have expandable ability?)

I (hopefully) understand what you talking about (have had a Nokia for years...), but i'm not aware of such a tool at this time for the MDA/XDA.
regards,

If I understand you: you need a program that gives you the opportunity of turning off the sound of the telephone for all incoming calls except one number or one group of numbers, or, better, to make call barring for all calls except for one number or one group of numbers (some kind of filtering). I also don't know if this kind of program is available for the Pocket PC Phone. Anyone on the forum aware of this ?

anybody has version 5?

I think what Tuningszocske want is something like Blacklist in Nokia Symbina phones. I know of a Chinese program call CallerFirewall, it allows one to add contacts to black or white list, you can choose to block all contact in black list, receive call only from white list or block all incoming calls etc. This program is compatible with dopod686、O2XDA、T-Mobile、and LegendT108.

Caller ID problems

In the last weeks I had probelms, because my qtek 2020 doesn't show the caller name, but only the number, for some calls.
I noticed that sometimes it do it also for outgoing calls.
I find the contact and call and after the call there is a number written instead of the name.
Is there a solution for this?
Thanks for the answer,
Uros

My lovely new swanky XDA2 is a waste of space in this respect too, as even after a reset or power off, my Caller ID app displays a photo in at most, about 45% of my incoming calls.
It's damn well driving me mad, and pEEs poor on the part of the XDA2.
Someone PLEASE tell me there is a way to get it to work for ALL my incoming calls, not just some of them on a very random basis.
I even find that re-running the app, so that it is a process in memmory, still makes no difference...

Shadamehr said:
Someone PLEASE tell me there is a way to get it to work for ALL my incoming calls
Click to expand...
Click to collapse
Nope, someone rather tell me how to grid rid of this stupid piece of software called CallerID once and forever...

Shadamehr said:
Someone PLEASE tell me there is a way to get it to work for ALL my incoming calls
Click to expand...
Click to collapse
I took out the four xflashman.lnk from the startup folder gaining 4 processes for the 32 processes limitation.
True or not, my caller_ID works 100% now.
I dont use the permamnent save, so I could do it.
Hope this may help you. :roll:

What is the xflashman.lnk file etc please?

Shadamehr said:
What is the xflashman.lnk file etc please?
Click to expand...
Click to collapse
Hi,
I am sorry, I wrote "x" as a variable...
I meant:
aflashman.lnk
cflashman.lnk
nflashman.lnk
tflashman.lnk
They are used to startup the permament save. I do not use it, so I released these 4 processes removing them from the \windows\startup folder.
Everything works much better now (no more hangs from Activesync and caller ID works 100% )
Bye

Since New ROM 1.06 CALLER ID did not show pictures ?? HELP

Since New ROM 1.06 CALLER ID did not show pictures anymore ???
nore affected rings, same things ???
If you do a preview on CALLED ID when you affect a picture to a CALLER, the picture and the special ring will show and play
but after you close everything, and you ask the person to call you in order to verified, no pictures SHOW??
I did try several friends and all the same ??
Is that because I have a new version of caller ID 1.20 (build 18586 )
can someone help ?
thanks

OK I found the solution (myself)
Finally I browsed to IA caller Options from the main menu, then selected General. In the General screen, disabled (un-check) the Display Photo During Incoming or Waiting Call checkbox, selected Done to make it effective. Then, I repeated the same steps to enable (check) the Display photo During Incoming or Waiting call checkbox.
Since then I got a few calls with template displayed again.
Hope it helps others.

I was also looking on how to disable IE CALLER (in order to install a substitute CALLER ID program)
here is how to do this :
Instructions for disabling IA Caller ID
(IA Caller ID is NOT Photo Contacts !!!):
Option #1
1. Open IA Caller ID
2. Press Menu>Options>General and un-check the "Display photo during incoming or waiting call" box.
Option #2
1. Open File Explorer on your Pocket PC
3. Browse to \Windows\StartUp\
4. Delete (or move) "IA_CID_Startup.exe"
5. Soft-reset the phone (turn-off, turn-on).

Thanks bruxelles5... I've been looking all over for a possible fix to the IA_Caller problem. I will try it on my MDA2 and see if it works...
Thanks again!

Are there any substitute programs?

there is substitute program of course : http://www.pocketx.net/products/photocontacts_ppc/index.html
And other also I'm shure

you may also want to try sygic's .mobile contacts http://www.sygic.com/mobile/pocketpc/

bnycastro said:
you may also want to try sygic's .mobile contacts http://www.sygic.com/mobile/pocketpc/
Click to expand...
Click to collapse
Does it use its own Caller ID software? I liked PocketX Photo Contscts because it has its own Caller ID module that replaces one we have in JAM. But I did not like the rest the programm does If they could do just Caller ID + assign pictures and ringtones I'd buy it.

Tried Sygic and didn't like it. I want to set my own pictures for incoming calls, not cartoons.

Caller Id Gone

I did a search and it seems this has popped up before but no1 had an answer.
I've had my MDA for months now, and only a few days ago did this start happening. This happens for all calls. Including ones i have saved on SIM and phone. I even have some ppl with specific ringtones assigned, the ringtones work, but no caller ID.
When i get an incoming call, i only see half the Incoming Call Notification Bubble.
I don't get the CALLER's ID. I get INCOMING CALL and the answer or ignore options.
Thats it.
I've searched in all the phone options i could think off, maybe thinking i accidentally turned off the ID setting. But for the life of me can't find it.
I really do not want to hard reset, as I've had my device setup perfectly the way i want it...Any help or guidance is much appreciated.
TIA

same problem here! pleeeeeeeeeeease help us!
I've suspected of currupt photo files 'cause me tom tom navigator lost iz settings at the same time. So i've copied the photos again from the PC and didn't fix it. When I try to add a pic to a contact, the program just freezes when I hit "preview".