Hi Guys,
I am new to this forum and any help will be much appreciated.
I am trying to connect ActiveSync via Bluetooth without any luck. I have
tried just about every option mentioned in the forums with no success. i have tried Toshiba Bluetooth as well as Bluesoleil. I have also tried Pocket
Bluetooth tools mentioned in one of the other Forums.
The most i can get to is to connect my MDA to my Laptop Bluetooth for 1-2 seconds and then it disconnects. Any foolproof method to do this.
Hope someone can help me with this.
Regards,
Vishal
Related
Hi there people,
I know I saw a post earlier about this but it didn't help my problem so far. By the way, i'm using a bluetooth from Belkin (for my laptop) which uses Widcomm stack protocols. And I haven't tweaked my XDA II so its still using the default bluetooth stack.
My problem is this, about a week ago, I can syncronize using ActiveSync via the cradle and bluetooth.. everything has worked fine ever since I got the device (which is over a month or two).. But starting yesterday, I'm having problems connection to ActiveSync via bluetooth. All the display is saying is "Connecting to Host".
I've already tried, re-installing, un-installing both the bluetooth driver (on the laptop) and ActiveSync 3.7. But I've already wasted my whole day today but I still can't synchronize. Has anybody out there knows a solution other than hard-resetting the whole XDA II???
I hope somebody could help me on this.
Anyway, thanks in advance for those who can help me...
Bluetooth Connection
i followed step by step about bluetooth ActiveSync guide from this site :
http://www.geekzone.co.nz/content.asp?contentid=2417
until now. i have no problem connection with activesync via bluetooth
my pc installed XP-sp1 and widcomm 1.4.3.4
myppc is standart MS BT stack
hope this helps.
Re: Bluetooth Connection
ajong said:
i followed step by step about bluetooth ActiveSync guide from this site :
http://www.geekzone.co.nz/content.asp?contentid=2417
until now. i have no problem connection with activesync via bluetooth
my pc installed XP-sp1 and widcomm 1.4.3.4
myppc is standart MS BT stack
hope this helps.
Click to expand...
Click to collapse
Thanks for the help but still did not work... I can connect via bluetooth... my xda2 and my laptop can authenticate each other... it's just the stupid activesync not working... arghhhh... i'm almost in the brink for resetting the whole d**m thing....
Now even using the cradle keeps getting Unresolved Items... time for backup and restore :evil:
some peoples problems with activesync is solved by removing the connection and letting it reconnect
also i believe there is a activesync 3.71
Re: Bluetooth Connection
AcidSlide said:
ajong said:
i followed step by step about bluetooth ActiveSync guide from this site :
http://www.geekzone.co.nz/content.asp?contentid=2417
until now. i have no problem connection with activesync via bluetooth
my pc installed XP-sp1 and widcomm 1.4.3.4
myppc is standart MS BT stack
hope this helps.
Click to expand...
Click to collapse
Thanks for the help but still did not work... I can connect via bluetooth... my xda2 and my laptop can authenticate each other... it's just the stupid activesync not working... arghhhh... i'm almost in the brink for resetting the whole d**m thing....
Now even using the cradle keeps getting Unresolved Items... time for backup and restore :evil:
Click to expand...
Click to collapse
I'm having the same problem, however mine has never synced via bluetooth. I can get both the desktop and the phone to add each other to the bonded list, but can never get either one to see the other once I have gone through the process of adding them to the bonded list.
Hi! Is there anybody who can help me to connenct my XDAII to the Belkin Bluetooth AccessPoint F8T030?
I allready tried almost everthing, but noting works. Because i´m not a profi, i´ll need step by step instruction if somebody can help!
Thank´s in advance!
Juergen
Using Belkin BT Access Point with XDAII
Juergen,
I have the same problem - a friend has loaned me the Belkin Bluetooth AP and I cannot get my XDAII to connect.
The problem appears to be that the XDAII bluetooth driver does not support the "LAN Access" profile.
There is a thread regarding this problem on the XDA-developers site. Look at
http://forum.xda-developers.com/viewtopic.php?t=14747
I think this requires a bit of work to get it going... I haven't got the courage up to do anything major to my XDA yet!
Cheers,
Lee
Have you tried installing pocket bluetooth tools?
@radiocode
Thanks for your hint, but i´m looking for something really working on my XDAII under WM2003. In your mentioned thread is too much hacking for me!
@guest
Can you give me more information?
Hi at all,
there were many questions how to connect the magician to ActiveSync via Bluetooth. There were many problems and for some people, like me, nothing worked.
Now I wrote my solution which I found out and made an instruction site:
http://www.jackclick.de/mdac-en.html (english)
http://www.jackclick.de/mdac.html (german)
I hope this helps anyone. :-D
Bye,
Jack
IN addiction i attach a link to an old post:
http://forum.xda-developers.com/viewtopic.php?t=35400&highlight=[/url]
ActiveSync via BT
If set up all settings correctly ActiveSync via BT connecting always fine. & this programm helps you to connect it in one tap include turning BT on.
Sync `Bluetooth.lnk for our device, working only when builtin connecting connectable, and close.lnk terminating repllog.exe & turning BT off.
Correct your own links!!!
thanks a lot. we are lucky that you are using jam kidding. thanks again.
help with bt activ sync
hi
in the activsync option menu is disapair the bluetooth option.
when i see with the registry editor in the: hkey_current_user\comm\rasbook no bluetooth directory.
can anybody help to put it back
thanks
Hi,
I hope I am posting in the right forum, but I didn't find a forum for the Charmer (MDA Compact II) PDA phone. So, I am posting here, because I noticed that there are many threads here about Charmer, but If there is any place where my problem fits better, please inform me about it.
So, is there any way to set up a wireless TCP/IP network between PC and Charmer (obviously, over bluetooth, Charmer doesn't have Wifi)? After 2 days of massive googleing and reading various threads, I figured out that my Charmer shipped with microsoft bt stack, witch is not support PAN. On the Magician, there is a solution, it is possible to replace the bt stack with another one, or expand the functionality (I don't know too much about the technical details) to support PAN. On the Prophet, the problem easily can be solved with Wifi.
But what about the Charmer? I cannot find any working hack to replace the bt stack.
Activesync works over bt, but there is no TCP/IP. If connect through USB cable, TCP/IP network appears.
I'm really disappointed, and plan to sell my 1 week old Charmer because of this problem. Any comments, tips or tricks are welcome.
Thanks in advance
go into my network places, view network connections. you should be able to use the 'bluetooth network connection' to establish a network between the two but ive just tried it on mine and it doesnt work, guess the charmers stack doesnt support it. i know this is the right way to go about doing it as i can set up a network between my pc and laptop.
Yap dave, I did exactly the same, under network connections/bluetooth network connection I cannot add my ppc, becouse it says that it doesn't support PAN. That's why I need to replace the ms bt stack, wich is a garbage. As I figured out the last days, nobody have succesfully did this scenario yet.
Any solution?
I still don't have the solution for replace the BT stack on Charmer which supports PAN.
Any ideas?
When you connect to PC via ActiveSync (via Bluetooth) your ppc got address 192.168.55.101 and pc got address: 192.168.55.100
Has anyone succeeded in using Internet Sharing over bluetooth with the Trinity? I am trying with a win2000 pc with the Widcomm BT stack and I can't make it work. The manual mentions BT Personal Area Network but the closest thing in the Widcomm stack is called BT Network Access Point.... I am trying to connect the pc and the Trinity that way but no joy so far. If it works for you, can you please post step by step instructions? Thanks.
PS: I don't know what was wrong with the old modem connection like my Qtek S200 had. I could make it work in seconds.