Database Users

ActiveSync Over WIFI

ActiveSync Over WIFI - does anyone know if this is possible.
I use WIFI at home on my XDAII for the internet, but would like to Sync it with my laptop without having to drag the cable home (or buy another usb cable)
Any ideas ?
Cheers

Yes, sure you could do it! Just make sure ActiveSync Connection settings on your desktop PC include Ethernet (right click on ActiveSync icon on the taskbar, choose Connection Settings and click on Allow network). Then, run ActiveSync on XDA-II and choose same 'synchronise via Network' setting - there is one on the 'Advanced' tab I think (can't say exactly, as my wife plays Lines on it right now ) - just type in your PC NETBIOS name (I guess it will be there already if you connected via USB before). I've tried it and it worked straight away (although takes few secs more to connect).
fishmedia said:
ActiveSync Over WIFI - does anyone know if this is possible.
I use WIFI at home on my XDAII for the internet, but would like to Sync it with my laptop without having to drag the cable home (or buy another usb cable)
Any ideas ?
Cheers
Click to expand...
Click to collapse

YOU BEUT ! I'D KISS YOU ... if
1. you were female
2. you were good looking
3. you were in close vacinity!
I had to run active sync, go to tools > Options > Server
And add "//myname" and untick SSL
However, my WIFI network card is set to MOBILE WEB GPRS (for IE and MSN, inbox etc) and it wanted WAP network GPRS so tried to dial up.
I changed the WIFI card to be WORK instead of INTERNET and it worked great.
Not sure if I have WORK and INTERNET set up correctly, it is basically how it came setup for GPRS access. But I don't mind changing it over now and then unless someone knows a better way?
(interesting that I managed to do an o2 Active update via the WIFI card! and not WAP GPRS - something I can't do while connected via USB? but can surf via USB )
Anyway... RESULT ! cheers

Well, obviously not female (while nothing is impossible in modern world - you could change sex, not only ROM version in your XDA ). As for the Wi-Fi card setup - it's quite simple, you'd better set it to 'Work' always unless you are connecting from Starbucks, and then change properties of 'work' connection, checking 'Connects to Internet' box and entering your proxy address. All these 'ISP' and 'Work' settings seemed to be pretty confusing to me first time until I understood how it works. You could not browse network through an USB cable (a mystery to me, since it's a normal PPP connection!), so Wi-Fi is probably the best option for all tasks - synchronisation, browsing etc.

Thanks for your help, I'll have a play

XDA II usb/lan connection

i have an XDA II which is currently connected to my pc via usb. is there anyway to use the usb connection to my computer (which is part of a wireless network) to access the internet? i know that i can do it with a wifi card, but is there a way to do it with my existing cables?

XDA to Internet
once your connected to active sync you can use activesync to feed internet through to your pda. I did this when i had a hp Ipaq.
the easiest was is to connect via bluetooth - set up aa bluetooth network port on your pc and link your pda to it - internet browsing wire free!
search the net with google or probably this forum for more info - I found plenty of help on this site and through google.

could you tell me exactly how i need to configure activesync 3.8 to do that?

Open activesync, go to "tools" then "options" and then go to the "rules" tab. At the bottom you'll see "pass through" then a connection drop down list. Change "work" to "the internet".

active sync
first, your pc should have an internet connection, then in the options menu of the active sync, select the RULES tab then select the Pass Through - Internet.

ppc (using USB activesync cable) to access the internet thru LAN?

i have an i-mate Jasjar wm5, I am using USB activesync cable to connect my device to my desktop PC. I would like to access the internet using LAN-DSL in my office.
Any idea or suggestions on how to do it?
Suggestions, insights, or any kind of guidance is highly appreciated.

unless you have set it to block it
then your device connected to activesync will allways have the same
lan network access as the pc
you prob have to change connection in settings->connection->connection advantage and pick mynetwork rather then my isp

Rudegar said:
unless you have set it to block it
then your device connected to activesync will allways have the same
lan network access as the pc
you prob have to change connection in settings->connection->connection advantage and pick mynetwork rather then my isp
Click to expand...
Click to collapse
thanks for the quick reply. activesync (v4.5) is on the exceptions list of windows firewall, hence it is not blocked.
My Work Network connection settings (modem and VPN) is empty. do we have to input any settings on them (modem and/or VPN)? On the proxy settings - I checked the box for 'This network connects to the Internet', I did several tests on unchecking/checking the box on 'This network uses a proxy server to connect to the Internet' - tried both IP of my desktop PC (192.168.1.12) and default gateway (192.168.1.1) on ports 8080, 80. I noticed though - the box for 'This network uses a proxy server to connect to the Internet' - always goes unchecked everytime I go back to check the settings.
i did several test settings, but it doesn't worked either. always it says 'This page cannot be displayed, connection was lost check settings'
any idea on these? thanks for your time

guess you could try changing the dns to what the pc is using
and try with other applciations like the network tools ping
and messenger to see if it's a IE issue

I also want to connect to internet through activesync 4.5 usb
hi, i have the same problem, i want to connect to internet through activesync 4.5 and wm5 herms. i am not good a computer use so could you please guide me step by step. i can synchronize but can't use internet.

if its through the office network, you may need to play with some settings to "fool" the office network to let you out.
The way to check what im talking about is to download http://johnhaller.com/jh/mozilla/portable_firefox/ portable firefox, and see if it connects by default. In my office, i had to input the LAN proxy settings into firefox to make it work. If this is the same for you, then i guess you'll have to do the same on the PPC. If you do find that this is the problem, and you cannot connect with firefox, post back and ill see if i can help

Turn off "Advanced Features"
explorer2612 said:
thanks for the quick reply. activesync (v4.5) is on the exceptions list of windows firewall, hence it is not blocked.
My Work Network connection settings (modem and VPN) is empty. do we have to input any settings on them (modem and/or VPN)? On the proxy settings - I checked the box for 'This network connects to the Internet', I did several tests on unchecking/checking the box on 'This network uses a proxy server to connect to the Internet' - tried both IP of my desktop PC (192.168.1.12) and default gateway (192.168.1.1) on ports 8080, 80. I noticed though - the box for 'This network uses a proxy server to connect to the Internet' - always goes unchecked everytime I go back to check the settings.
i did several test settings, but it doesn't worked either. always it says 'This page cannot be displayed, connection was lost check settings'
any idea on these? thanks for your time
Click to expand...
Click to collapse
There's a setting in ActiveSync "Advanced" and uncheck the box. See if that helps. It apparently has helped others with USB connection issues.

rightclick on ActiveSync icon on systemtray --> connection settings... ---> config as my pic you can access internet thought your PC. If you still can't connect to internet please hardreset your PDA

internet sharing

I tried to connect my laptop to the internet using Internet sharing and my blue angel GPRS connection without success. Anyone been doing this? any special configuration to be made?

1. make sure that your connection settings are correct
2. check your connection setting of your active sync (you'll find it in the options.)
3. just choose your internet sharing program in your blue angel
4. enjoy it..
regards
adri

Well i tried everything i can and still it dosent work. Can i use a different program for internet sharing than the default one that came with the rom? any special configuration for active sync?

Don't tell us "tried everything", because for me it means you have no idea what to do, so for sure you did not do the correct thing.
ANSWER/EXECUTE EACH POINT BELOW. Do not miss ANY (especially 3rd)
1. Do you want to use GPRS internet connection from you GSM operator to have internet access on your computer?
2. Does the internet connection work correctly in the PDA (you can browse websites using internet exploder)?
3. Disconnect BlueAngel from the computer. Disconnect your computer from Internet, if it has any other connection.
4. Run Internet Sharing application.
5. Choose a correct internet connection (if 2. was YES - default selection should be OK, but if it does not work, try other connections on the list, if available).
6. Choose USB connection on the 2nd list (you can play with bluetooth connection, when USB will be fine).
7. Press Connect.
8. When message shows up saying that device is ready, then connect BlueAngel to the computer using provided USB Cable/Cradle.
9. Wait, untill PC will recognize new device (Network Adapter) and test the internet connection.
If somehow this procedure did not work, pinpoint exact moment that did not work and explain what went wrong (exact message would be helpful).

How to connect WM 6.5 device to WinXP via Ad Hoc to Internet

Hello All,
Here is my problem and I need help.
Situation:
Laptop WinXp is connected to Internet via cable modem.
Now I want to make access to Internet via Wi-Fi from laptop for WM 6.5 device.
I manage to connect and browse Internet with other laptop via laptop connected to cable modem –internet. WM device is showing connected to SSID but Internet doesn’t work.
Internet access via ActiveSync and USB cable is working perfectly but via Wi-Fi doesn’t
After many hours browsing various forums I couldn’t find any good working solution.
Any help is highly appreciated.
Regards and Thank you.
zoran974
ACER S200
Please find attached.

How can I at least connect WM6.5 using Laptop's Internet?
I have WM6.5 device (HD2) with no data plan. At home I can use wifi to connect to internet. However at work, I have ActiveSync 4.5 on laptop but It does not connect to Internet. I read somewhere that using ActiveSync WM device can use laptops internet, but I could not get it to work. Can anyone tell me how??
Intermittently with some setting change I was able to get internet only via Internet Explorer in HD2, and at one other time only in Opera, but never from any other Apps (like GoogleMaps, HD2 sense's Weather, etc). It could be when I tried InternetSharing on my laptop's WinXP's network connection to wireless Network or to LAN2 (LAN to Wireless or LAN to LAN2. LAN2 is automatically showing when my device is connected via ActiveSync). However I am back to zero now.
I wonder it has anything to do with Company's Firewall policies. On my laptop Firewall is turned off. But then I was not able to get this to work at home either.
I have the following settings on ActiveSync's "Connection Settings":
All six items checked.
3rd Item dropdown box has COM3 or DMA (could not figure out any difference).
4th item dropdown has Automatic or Work Network.
connected via USB cable.
Let me know what is it that I am missing??

samalam said:
I have WM6.5 device (HD2) with no data plan. At home I can use wifi to connect to internet. However at work, I have ActiveSync 4.5 on laptop but It does not connect to Internet. I read somewhere that using ActiveSync WM device can use laptops internet, but I could not get it to work. Can anyone tell me how??
Intermittently with some setting change I was able to get internet only via Internet Explorer in HD2, and at one other time only in Opera, but never from any other Apps (like GoogleMaps, HD2 sense's Weather, etc). It could be when I tried InternetSharing on my laptop's WinXP's network connection to wireless Network or to LAN2 (LAN to Wireless or LAN to LAN2. LAN2 is automatically showing when my device is connected via ActiveSync). However I am back to zero now.
I wonder it has anything to do with Company's Firewall policies. On my laptop Firewall is turned off. But then I was not able to get this to work at home either.
I have the following settings on ActiveSync's "Connection Settings":
All six items checked.
3rd Item dropdown box has COM3 or DMA (could not figure out any difference).
4th item dropdown has Automatic or Work Network.
connected via USB cable.
Let me know what is it that I am missing??
Click to expand...
Click to collapse
Try changing the 4th item dropdown to "The Internet"
Try unchecking the "Allow wireless connection on device when connected to the desktop"
The 3rd item dropdown doesn't matter if you connect via USB.
Can someone figure out how to sync via WiFi?

Undoubtedly, technology problems hold you and your company back. That's not good for business and as such it's a great idea to get the problems fixed quickly. For several small companies, small business computer support isn't confined to one person within the company; rather, it is tech support that is called in.
==================
Project Management Software

patrick_spd4u said:
Try changing the 4th item dropdown to "The Internet"
Try unchecking the "Allow wireless connection on device when connected to the desktop"
The 3rd item dropdown doesn't matter if you connect via USB.
Can someone figure out how to sync via WiFi?
Click to expand...
Click to collapse
I tried and that did not work. Is there any body who got this working, if not in company settings, what about in home settings??