Database Users

ActiveSync Over WIFI

ActiveSync Over WIFI - does anyone know if this is possible.
I use WIFI at home on my XDAII for the internet, but would like to Sync it with my laptop without having to drag the cable home (or buy another usb cable)
Any ideas ?
Cheers

Yes, sure you could do it! Just make sure ActiveSync Connection settings on your desktop PC include Ethernet (right click on ActiveSync icon on the taskbar, choose Connection Settings and click on Allow network). Then, run ActiveSync on XDA-II and choose same 'synchronise via Network' setting - there is one on the 'Advanced' tab I think (can't say exactly, as my wife plays Lines on it right now ) - just type in your PC NETBIOS name (I guess it will be there already if you connected via USB before). I've tried it and it worked straight away (although takes few secs more to connect).
fishmedia said:
ActiveSync Over WIFI - does anyone know if this is possible.
I use WIFI at home on my XDAII for the internet, but would like to Sync it with my laptop without having to drag the cable home (or buy another usb cable)
Any ideas ?
Cheers
Click to expand...
Click to collapse

YOU BEUT ! I'D KISS YOU ... if
1. you were female
2. you were good looking
3. you were in close vacinity!
I had to run active sync, go to tools > Options > Server
And add "//myname" and untick SSL
However, my WIFI network card is set to MOBILE WEB GPRS (for IE and MSN, inbox etc) and it wanted WAP network GPRS so tried to dial up.
I changed the WIFI card to be WORK instead of INTERNET and it worked great.
Not sure if I have WORK and INTERNET set up correctly, it is basically how it came setup for GPRS access. But I don't mind changing it over now and then unless someone knows a better way?
(interesting that I managed to do an o2 Active update via the WIFI card! and not WAP GPRS - something I can't do while connected via USB? but can surf via USB )
Anyway... RESULT ! cheers

Well, obviously not female (while nothing is impossible in modern world - you could change sex, not only ROM version in your XDA ). As for the Wi-Fi card setup - it's quite simple, you'd better set it to 'Work' always unless you are connecting from Starbucks, and then change properties of 'work' connection, checking 'Connects to Internet' box and entering your proxy address. All these 'ISP' and 'Work' settings seemed to be pretty confusing to me first time until I understood how it works. You could not browse network through an USB cable (a mystery to me, since it's a normal PPP connection!), so Wi-Fi is probably the best option for all tasks - synchronisation, browsing etc.

Thanks for your help, I'll have a play

Internet via USB cable?

When I used PDAs (dell x50v) i was able to browse the internet automatically with my pda when it is connected via USB cable (with ActiveSync), but with the JAM... i don't know how to do it, do I need to configure something ? Or is it just not possible to do so?

open ActivSync, under Tools-->Options menu, go to RULES tab & the alst section PASS THROUGH, choose THE INTERNET from the drop-down list & click OK
now, if you are connecting to the Internet using a proxy server, then specify that server address & ports in the connection settings.
Cheeeeeeeers :lol:

Connecting to internet through Active Sync

I am trying to configure my XDA2 to connect to my PC and surf the internet via a BT connection. I can Sync via BT but when I try to set up my connection it keeps asking for a phone number despite me saying it is over a Bluetooth connection and my IP is broadband. Sorry if this has been asked but I did search for any info on this.

thomo said:
I am trying to configure my XDA2 to connect to my PC and surf the internet via a BT connection. I can Sync via BT but when I try to set up my connection it keeps asking for a phone number despite me saying it is over a Bluetooth connection and my IP is broadband. Sorry if this has been asked but I did search for any info on this.
Click to expand...
Click to collapse
Why do you need to setup connection for since it's already connected with ActiveSync via BT? Basically once you get connection between your device & activeSync, that's all the step you did. Unless a firewall has stopped your device from accessing to the internet; if it's the case, create exception for your activeSync, and retry browsing with your device.
hope this helps.
regards.

thanks for yor reply, Each time I try to connect the the interneet on my device it keeps trying to connect via GPRS and not through my PC via BT....

Go to ActiveSync, open the options menu & go to Rules tab.
At the bottom, you will find Pass Through Conenction, make sure its set to The Internet and not Work
Cheeeers 8)

thats it, it finally works. Thanks very much.

Glad to hear that, thomo
You're welcome anytime, dude :wink:

activesync through bt
go to setup in bluetooth and select the activesync in bt
pair the pda or ppc
give password
in wm2005 select activesync through the bt
brouse internet
i did myself

I'm having a similar problem and have effected the setting as above, however IE on my IIs says "the page you are looking for cannot be found". My computer connects fine and I have the same issue when trying to connect the device via WiLan, although I do connect to the network.
I've been trying to fiddle with the settings for a few days now but no success...anyone out there got any ideas.
Many thanks

I have mastered it now, I sync using BT on my device, leave it connetced, close Active sync on my XDA 11, Click on IE and the device connects through my PC, super duper.........

Thanks, this is what i am looking for now. I will try it

i can now only online with cable, not through Bluetooth connection

go into the advantage settings for connections
there you should be able to change the network back to my isp insted
of my network

bluetooth-internet
Hai...iam new here..i have got O2mini and would like to connect to internet via bluetooth...
i try using usb cable and activesync program to serve internet and its working.
...i succesfully connect my pc and ppc via bluetooth by using ppc activesync but when try connet to internet its still go to gprs..
pls help me...TQ

like i said again and again in this thread it's all about which network is picked in advantage settings under network connections in systems

I also tried to make a connection to the internet with activesync and usb. But with my mda doesn't work. iexplorer says the page you are looking for cannot be found. But my ppc says "connectivity the internet Pc connection". What are the settings on your ppc, so i can check?
Somebody help me.

test with ping
and maybe messenger to see if it's a dns issue
and if people use pocketplus they prob should make sure that it's not set to close insted of minimizing otherwise the connection would most likely be closed when they close activesync

Thank you very much. You solved my problem.
ezzkht said:
Go to ActiveSync, open the options menu & go to Rules tab.
At the bottom, you will find Pass Through Conenction, make sure its set to The Internet and not Work
Cheeeers 8)
Click to expand...
Click to collapse

Internet connection from LAN just using bluetooth?

This might be an enormously newbie question, but if I have a work desktop connected to the internet via the LAN, can I add a bluetooth dongle to it to connect my Jasjar to the internet?

I think you can. You can sync your xda with Active Sync. Then it will use the internet connection from your PC, just like when you have it connected with the USB cable.

I just tried this and it worked.
What you gotta do is the following:
- Open your bluetooth connections on your PC
- Add new device
- Make sure you have your bluetooth turned on on your Universal and make detection of other devices possible
- Add your device on the PC
- Now go to the COM port tab
- Choose add and choose a new incomming port (your PC will make a new COM port, make sure this number is below 20)
- Open Active Sync on your universal and choose "menu" connect with bluetooth
- Now Active Sync will say that there are no devices are installed. Add a new device (your PC)
- You will see that the service "Active Sync" is available. Now check this option
- Now you can make the connection with your PC and also will be able to use the internet connection
A friend told me that the internet connection won't go faster then GPRS, so don't expect much. But you have your free wireless internet connection within a range of about 10 meter from your PC.

8YEight said:
I just tried this and it worked.
What you gotta do is the following:
- Open your bluetooth connections on your PC
- Add new device
- Make sure you have your bluetooth turned on on your Universal and make detection of other devices possible
- Add your device on the PC
- Now go to the COM port tab
- Choose add and choose a new incomming port (your PC will make a new COM port, make sure this number is below 20)
- Open Active Sync on your universal and choose "menu" connect with bluetooth
- Now Active Sync will say that there are no devices are installed. Add a new device (your PC)
- You will see that the service "Active Sync" is available. Now check this option
- Now you can make the connection with your PC and also will be able to use the internet connection
A friend told me that the internet connection won't go faster then GPRS, so don't expect much. But you have your free wireless internet connection within a range of about 10 meter from your PC.
Click to expand...
Click to collapse
Oooooohh brother,i've read this and tried it at home.. i played arround for an hour or two,i had many problems...
But it works !!! Finally it works ! So what i want to say is :
THANK YOU !!!!
My PC is downloading full speed and i am surfing from my bed with my UNI

How to connect WM 6.5 device to WinXP via Ad Hoc to Internet

Hello All,
Here is my problem and I need help.
Situation:
Laptop WinXp is connected to Internet via cable modem.
Now I want to make access to Internet via Wi-Fi from laptop for WM 6.5 device.
I manage to connect and browse Internet with other laptop via laptop connected to cable modem –internet. WM device is showing connected to SSID but Internet doesn’t work.
Internet access via ActiveSync and USB cable is working perfectly but via Wi-Fi doesn’t
After many hours browsing various forums I couldn’t find any good working solution.
Any help is highly appreciated.
Regards and Thank you.
zoran974
ACER S200
Please find attached.

How can I at least connect WM6.5 using Laptop's Internet?
I have WM6.5 device (HD2) with no data plan. At home I can use wifi to connect to internet. However at work, I have ActiveSync 4.5 on laptop but It does not connect to Internet. I read somewhere that using ActiveSync WM device can use laptops internet, but I could not get it to work. Can anyone tell me how??
Intermittently with some setting change I was able to get internet only via Internet Explorer in HD2, and at one other time only in Opera, but never from any other Apps (like GoogleMaps, HD2 sense's Weather, etc). It could be when I tried InternetSharing on my laptop's WinXP's network connection to wireless Network or to LAN2 (LAN to Wireless or LAN to LAN2. LAN2 is automatically showing when my device is connected via ActiveSync). However I am back to zero now.
I wonder it has anything to do with Company's Firewall policies. On my laptop Firewall is turned off. But then I was not able to get this to work at home either.
I have the following settings on ActiveSync's "Connection Settings":
All six items checked.
3rd Item dropdown box has COM3 or DMA (could not figure out any difference).
4th item dropdown has Automatic or Work Network.
connected via USB cable.
Let me know what is it that I am missing??

samalam said:
I have WM6.5 device (HD2) with no data plan. At home I can use wifi to connect to internet. However at work, I have ActiveSync 4.5 on laptop but It does not connect to Internet. I read somewhere that using ActiveSync WM device can use laptops internet, but I could not get it to work. Can anyone tell me how??
Intermittently with some setting change I was able to get internet only via Internet Explorer in HD2, and at one other time only in Opera, but never from any other Apps (like GoogleMaps, HD2 sense's Weather, etc). It could be when I tried InternetSharing on my laptop's WinXP's network connection to wireless Network or to LAN2 (LAN to Wireless or LAN to LAN2. LAN2 is automatically showing when my device is connected via ActiveSync). However I am back to zero now.
I wonder it has anything to do with Company's Firewall policies. On my laptop Firewall is turned off. But then I was not able to get this to work at home either.
I have the following settings on ActiveSync's "Connection Settings":
All six items checked.
3rd Item dropdown box has COM3 or DMA (could not figure out any difference).
4th item dropdown has Automatic or Work Network.
connected via USB cable.
Let me know what is it that I am missing??
Click to expand...
Click to collapse
Try changing the 4th item dropdown to "The Internet"
Try unchecking the "Allow wireless connection on device when connected to the desktop"
The 3rd item dropdown doesn't matter if you connect via USB.
Can someone figure out how to sync via WiFi?

Undoubtedly, technology problems hold you and your company back. That's not good for business and as such it's a great idea to get the problems fixed quickly. For several small companies, small business computer support isn't confined to one person within the company; rather, it is tech support that is called in.
==================
Project Management Software

patrick_spd4u said:
Try changing the 4th item dropdown to "The Internet"
Try unchecking the "Allow wireless connection on device when connected to the desktop"
The 3rd item dropdown doesn't matter if you connect via USB.
Can someone figure out how to sync via WiFi?
Click to expand...
Click to collapse
I tried and that did not work. Is there any body who got this working, if not in company settings, what about in home settings??