Related
I upgraded to WM2003 in Jeff's fabulous kitchen. Everything works great. My ISP has different access points for wap and www over gprs. It works with WM2002 very well but with WM2003 does not. What could be the possible problem? I guess WM2003 has more problems rather than advantages (if any, of course. I haven't discovered any, except for the character counter in sms message composer). This forced me to downgrade the ROM to Jeff's 3.17, which is perfect in all respects.
They say Pocket Internet Explorer can do WAP since WM2003. Haven't tested it, never use WAP.
wm2003 & WAP
The main problem is that PIE 2002 or 2003 don't understand wml. Yes, I tried with required access point & gateway but it just does not connect. The problem is that I really need to browse some wap info as these pages are not available on www suitable for xda.
Anyway, I am perfectly happy with Jeff's 3.17 ROM. I get WM, I get ezWap. Everything works very well.
One problem, though a little out of place. tdLaunch sometimes makes the Xda crash. It happens, be it in ROM or installed separately.
I think its yr configuration or yr ISP.
Ive been using EzWap and PIE to do wap extensively
on gprs with either PPC2002 or wm2003.
samohile said:
WM2003 has more problems rather than advantages (if any, of course. I haven't discovered any, except for the character counter in sms message composer). This forced me to downgrade the ROM to Jeff's 3.17, which is perfect in all respects.
Click to expand...
Click to collapse
You are right!
Pocket PC phone version WM2003 has more problem than advantages in Pocket PC phone.
but I'm using IPAQ WM2003 no such problems at all!
alqwerty said:
I think its yr configuration or yr ISP.
Ive been using EzWap and PIE to do wap extensively
on gprs with either PPC2002 or wm2003.
Click to expand...
Click to collapse
You may be right about the isp. but they are not in a position to solve my problem. They have never heard of PPC, they don't know the difference in services provided, they don't know what are the configurations. All they know is to send the configuration by sms to the user's mobile phone, which is useless in case of xda.
However, I am sure PIE does not support wml. Can you tell me how do you make it understand wml?
Can you access these pages?
http://wap.yahoo.com.sg/
http://wap.ft.com/
http://mopilot.com/wml/index.wml
Because my PIE can
You should be able to browse any WAP site on the Internet through the Internet connection. However if your operator has both WAP and Internet connections then the WAP one will probably only allow you to browse their own WAP gateway site, and possibly other WAP sites through the WAP gateway.
In Pocket PC you cannot set the Internet Explorer to select which connection you will use. It defaults to the Internet setting. As you must define the WAP proxy using Work Settings, this is of no help to you.
The best solution is to create a new connection settings area, configure both Work And Internet locations to use it, and put all you connections in there. Then manually select Internet or WAP when you want to switch.
WAP settings over gprs..."it
vpreHoose said:
You should be able to browse any WAP site on the Internet through the Internet connection. However if your operator has both WAP and Internet connections then the WAP one will probably only allow you to browse their own WAP gateway site, and possibly other WAP sites through the WAP gateway.
In Pocket PC you cannot set the Internet Explorer to select which connection you will use. It defaults to the Internet setting. As you must define the WAP proxy using Work Settings, this is of no help to you.
The best solution is to create a new connection settings area, configure both Work And Internet locations to use it, and put all you connections in there. Then manually select Internet or WAP when you want to switch.
Click to expand...
Click to collapse
Thanks.
I have tried all the options, this one too. It does not work. I found use of EzWAP 2.5 more convenient, as it has it's own proxy/gateway configuration area. It does not depend on gateway config of connection manager. Further, it allows you to choose your nodcm connection.
What puzzles me the most is that EeWAP 2.1 or 2.5 did not work with Jeff's WM2003. It works with Jeff's ROMkitchcn 2002.
Hi
After upgrading my XDAII to T-mobile ROM, MMS composer doesn't work. . I click the composer icon but nothing happens?
EzWAP v2 MMS also doesn't work. Please help me. Others work well.
Sonadt
I also have the same problem ater T-Mobile upgrade, you click on the MMS composer, but the program never starts
John
applecom said:
I also have the same problem ater T-Mobile upgrade, you click on the MMS composer, but the program never starts
John
Click to expand...
Click to collapse
you guys probably don't have mmreg in your startup folder.
Not sure if its the same thing
I had similar with i-Mate upgrade and found it was something in the 'Files' Sync followed by a soft reset. I had to hard reset and make sure I did not sync 'Files'.
I eventually made a new 'My Documents' on my PC, copied over what I needed and then syncd 'Files'. Don't let it sync the old stuff.
It was very odd :?
I've found the reason MMS and even SMS can not work properly (can not receive any SMS but you can send it).
That problem happens after restore back our data which I did backup by Pocket backup.
So the solution is:
- hard reset again
- install all programs again
- sync with PC to get personal data (you may lost some but contact, calenda, note... are OK)
Maybe new version is not compatible back with Pocketbackup.
T-Mobile USA MMS Setup
I've followed around the MMS+tmobile threads but don't see the specific setups parameters for the iMate XDA2 running WM2003. Questions I would have:
In MMS Composer->Servers tab:
1. what is TMO's gateway IP addr and server address?
MMS Composer Preferences tab:
1. In Connect Via:, chooices are: My Work Network, My ISP, Work, Secure WAP Network, The WAP network, The Internet. Which of these would be setup to connect to MMS server?
In Start-Settings-Connections-Connections-(My ISP) Manage Existing Connections, I've tried internet2.voicestream.com, wap.internet.voicestream.com and internet3.voicestream.com
but don't seem to have the options configed correct.
Any help on the forum would be appreciated.
T-Mobile USA MMS Setup
I've followed around the MMS+tmobile threads but don't see the specific setups parameters for the iMate XDA2 running WM2003. Questions I would have:
In MMS Composer->Servers tab:
1. what is TMO's gateway IP addr and server address?
MMS Composer Preferences tab:
1. In Connect Via:, chooices are: My Work Network, My ISP, Work, Secure WAP Network, The WAP network, The Internet. Which of these would be setup to connect to MMS server?
In Start-Settings-Connections-Connections-(My ISP) Manage Existing Connections, I've tried internet2.voicestream.com, wap.internet.voicestream.com and internet3.voicestream.com
but don't seem to have the options configed correct.
Any help on the forum would be appreciated.
Hey all,
i have found a new mms program that is currently in beta testing that seems to work so far in wm05. the address is http://electricpocket.com/products/pixermms.html you can find the download there near the bottom, the correct one is where it mentions xda.
i however am unable to test send/receive features because i cant work out how to set up gprs/wap in magneto some help with this would be appreciated.
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
try any of this three cab see which one will work for you
MMS
I wasn't able to get this to work. Stayed stuck on "0% Connecting" even when my GPRS connection was established prior. Funnily enough, if i DIDN'T establish the GPRS connection manually then it said "Authentication OK" even though it wasn't connected to anything! Then it would just hang.
I have to soft-reset to get out of it as "Cancel" does not work.
Using:
WM2005 1.50g
Radio 1.17
i-mate PocketPC
Vodafone NZ
I have not had any joy with MMS Composor 2.0.0.20 for Magneto either (hence why I'm trying this). I am about to install EzWAP 2.5 and try that again. Had some issues with it though, will try again. MMS is just handy to have. You wonder what messages you're missing out on without it
toenailed said:
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
Click to expand...
Click to collapse
Toenailed,
Does this use the Smart/Globe MMS Settings or the Smart/Globe Internet(GPRS) Settings from the Autoconfig app?
Thanks
Sending is work perfectly, but the receive...
pixar 4
hello to all
i have allready tryed that prog and it keeps saying that the messege was reject for unknon reason and to check my card for mms etc
card as mms enable
it says that allways the diference now is the international nunber format now it says 10% 20% to 100% them it gives me the error
i manualy conect but no luck
so i get Messagw rejected- no reason given
wap service unavailable
Please check with you operator ....etc etc
help needed
thanks
toenailed said:
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
Click to expand...
Click to collapse
Toe,
Could you post your settings for Pixer4?
My settings are below and I cant seem to send nor receive..
Thanks..
hi jenellej.. just run the GPRS cab ..
under in Service use Globe MMS Settings or Smart MMS Settings or Sun MMS Settings
for sun
"Gateway"="202.138.159.78"
"MMS URL"="http://mmscenter.suncellular.com.ph"
for GLobe
"MMS URL"="http://192.40.100.22:10021/mmsc"
"Gateway"="192.40.100.20"
for Smart
"MMS URL"="http://10.102.61.238:8002"
"Gateway"="10.102.61.46"
i already try the GLOBE and SUN .. but i havent try it with SMART yet
one last thing .. during sending .. the connectivity will not popup that it is connecting to GPRS .. but Pixer4 will say it connects .. suprisingly it does send without the GPRS Connecting notification appeared .. so its normal that you though it doesnt established a connection but in fact it does ..
PS Dont install also ArcSoft MMS COmposer
I manually configured my connection settings. But there should be no problem using toenailed cab. I used to have problems, maybe because it causes conflict with Arcsoft MMS. I uninstalled it, then it worked!
still doenst work
can ´t get it ti work in vodafone.pt i have tryed every possible combination and still get the message rejected for unknown reason
i will not give up lol
gateway 213.30.27.63
url http://mms/servlets/mms
port 9201
After sending--- device Hang
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Re: After sending--- device Hang
muhelen said:
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Click to expand...
Click to collapse
it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.
for SMART (philippines):
here's the settings for Pixer..
Start/Settings/Connections/Connections
Click Advanced Tab, choose Select Networks
Under "Programs that automatically connect to the Internet should connect using:", click new.
Under General Tab:
Enter a name for these settings: Smart MMS
Under Modem Tab:
Tap new, enter a name for the connection, select "Cellular line (GPRS)" then tap next.
Access point name: mms
Click Next then Finish.
NOw open Pixer4.
Tap Options/Preferences/Advanced.
Wap Gateway IP Address:
10.102.61.46
MMS URL:
http://10.102.61.238:8002
Service:
Smart MMS
Click OK, check "Get Message Immediately" then OK.
for GLOBE and SUN settings, refer to toenailed's post above.
i was working on a cab with toenailed's help (thanks toe!!!), but i still can't get it to work. maybe later i'll figure it out when i'm not too busy. :wink:
I can send using Pixer4 on the Orange network. Not sure about receiving yet.
My Pixer4 settings:
Wap Gateway IP Address:
192.168.224.10
MMS URL:
http://mms.orange.co.uk
Service:
Orange MMS
works perfectly on sending MMS message (Etisalat) Operator & 1.5 WM but recieving is not working even when retrieve option is ticked, but that could be because of the workarounds am doing with MMS composer, am trying to replace the pop3 account in my inbox with MMS composer but no success so far :shock:
How abaut EzWAP MMS
i'm not try it yet but i thought it work.... :roll:
Re: After sending--- device Hang
mariolouis said:
muhelen said:
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Click to expand...
Click to collapse
it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.
Click to expand...
Click to collapse
mariolouis, thanks for the explanation. It's really take time to send. Infact, I'm waiting more than 10 minutes, but still the same!
try this MMS Composser
this two cab must instaled
Re: try this MMS Composser
mwilmar said:
this two cab must instaled
Click to expand...
Click to collapse
Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?
Re: try this MMS Composser
jenellej said:
mwilmar said:
this two cab must instaled
Click to expand...
Click to collapse
Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?
Click to expand...
Click to collapse
Arcsoft MMS Composer 1.6
i have successfully upgraded my XDA2 from wm2003se to wm2005 1.60a thanks BUZZ.......my record and camera button dont work.....but thats ok....still waiting for the fixes on this forum......however im having dilemmas with trying to setup GPRS and MMS on my XDA2.....im with OPTUS australia.....i know i have GPRS and MMS available as i was using this on the old OS wm2003se.......anyone here know how i can set this up properly.....thanks in advance
irv777 said:
i have successfully upgraded my XDA2 from wm2003se to wm2005 1.60a thanks BUZZ.......my record and camera button dont work.....but thats ok....still waiting for the fixes on this forum......however im having dilemmas with trying to setup GPRS and MMS on my XDA2.....im with OPTUS australia.....i know i have GPRS and MMS available as i was using this on the old OS wm2003se.......anyone here know how i can set this up properly.....thanks in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?p=142617#142617
Good day all
when I was using old rom 1.48 (WWE) my hd2 was able to send and receive MMS but now after I had upgraded my device to the new rom 1.66 (WWE), I cant send any MMS.
when I send MMS, the device connects to the MMS server and its keep connected forever without sending the MMS
any idea guys about this problem ?
me too
loney_frsu said:
me too
Click to expand...
Click to collapse
it could be rom problem but we need to confirm this..
anyone else has same problem ?
use search on forum
only solution is to erase operator config reset
create config/update config problem solved
str0g said:
use search on forum
only solution is to erase operator config reset
create config/update config problem solved
Click to expand...
Click to collapse
I already erased the operator setting and make them again manually and still it does not work
AbdullahT said:
Good day all
when I was using old rom 1.48 (WWE) my hd2 was able to send and receive MMS but now after I had upgraded my device to the new rom 1.66 (WWE), I cant send any MMS.
when I send MMS, the device connects to the MMS server and its keep connected forever without sending the MMS
any idea guys about this problem ?
Click to expand...
Click to collapse
WIFI isn't on is it ??
I don't think it works properly over WIFI
I flashed my O2 version with the new rom... ran through the set-up and all seems to be working fine (once I realised setup was hidden behind sense!!!)
I had this problem too, I went to Wireless settings and Data Connection, selected UK and then my service provider and it set my MMS/mobile web up. I wasn't able to use mobile web either which explained why weather and other functions were not working.
waynepyrah said:
WIFI isn't on is it ??
I don't think it works properly over WIFI
I flashed my O2 version with the new rom... ran through the set-up and all seems to be working fine (once I realised setup was hidden behind sense!!!)
Click to expand...
Click to collapse
no, the wifi is not turned on.
this problem is a little bit weird because it does not show any error messege when the mms is not sent, its just keep connected to the mms server without sending the mms it self.
abdullaht said:
no, the wifi is not turned on.
This problem is a little bit weird because it does not show any error messege when the mms is not sent, its just keep connected to the mms server without sending the mms it self.
Click to expand...
Click to collapse
hard reset <<<<
MrMagicMushroom said:
I had this problem too, I went to Wireless settings and Data Connection, selected UK and then my service provider and it set my MMS/mobile web up. I wasn't able to use mobile web either which explained why weather and other functions were not working.
Click to expand...
Click to collapse
Thanks
problem solved.
what I had done is running the connection setup wizard again. the connection setup wizard updates all existing connections including mms connection after that I had tried to send mms and the mms was sent .