Hi all,
i am in trouble after trying to install wm2005 beta on my hx4700.
The unsuccessfult flashing made the ipaq to show only one screen.
No software or hardware resets helped me.
SERIAL
"HP INVENT" LOGO
v1.01
When i put it on usb cradle....the SERIAL changed to "USB"...
After reading almost all postings on the web i downloaded mtty
and connected to the ipaq bootstrap loader.
this is part of the log:
USB>h
Invalid command : h
For a help screen, use command ? or h
USB>?
Invalid command : ?
For a help screen, use command ? or h
USB>set
Syntax error!
Usage:
set [Type [Value]]
Set control flags.
Type(hex) : Control function types.
Value(hex) : Setting values for types.
If value is not given, default is 0.
Type 0(Echo on/off): 1(on) and 0(off).
Type 1(Operation mode): 1(auto) and 0(user).
Type 2(Back color on/off): 1(on) and 0(off).
Type 3(Inverse on/off): 1(on) and 0(off).
Type 4(Front color value): 16 bits data
Type 5(Background color value): 16 bits data
Type 6(Set color of screen): Fill color to whole screen one time.
Type 8(COMM queue flag): 0(TX_RX disable),1(RX enable),2(TX enable) and 3(TX_RX enable).
Current flag settings:
Type 0(Echo flag): cEchoFlag=(0x1).
Type 1(Operation mode flag): cOpModeFlag=(0x0).
Type 2(Back color flag): cBackColorShowFlag=(0x1).
Type 3(Inverse flag): cShowInverseFlag=(0x0).
Type 4(Front color): g_wFColor=(0x0).
Type 5(Background color): g_wBColor=(0xFFFF).
Type 6(Set color of screen): None.
Type 8(COMM queue flag): g_cCommQueueFlag=(0x0).
USB>l
start download
SFail to synchronize with the host (2)
USB>
USB>lr
Invalid command : lr
For a help screen, use command ? or h
USB>lc
Invalid command : lc
For a help screen, use command ? or h
USB>
If somebody have any experience with such problem please reply to me.
If you can send me original bootloader and rom please contact me.
My email is [email protected]
For those who will suggest me to contact HP i alerady did that the they told me to buy new IPAQ
I'm sorry this has happened to you. The same thing happened to me when I tried to upgrade. HP told me that it would have to be sent in for a reflashing. I had a warranty so I could've done this for free... but waiting a week for a fix wasn't going to cut it for me. I finally fixed it after scouring the web for answers. Here's how I did it.
The first step is to get a copy of the rom image onto an SD card. Using a hex editor (I recommend the Cygnus Free Hex Editor) you need to delete the first 2600 bytes of hx4700_20039_wwe.nbf that is included with the update. The file should be located in C:\iPAQ\WWE_WM5.0_Upg. Then I used the trial version of All Image (http://www.towodo.com/products/allimage) to write the rom image to an sd card. The card should be 256MB or larger.
The next thing you need to do is to upload the rom image to the pda. Remove the battery from the pda and put the SD card into the slot. Put the battery back on and connect it to power but not USB. On the pda hold the power button, contacts button, and iTask button and shortly tap the reset button. It may or may not say "Press power to flash". A progress bar should appear and the percentage should slowly increase. When it's done it should say the checksum was ok or it was a failure. It doesn't matter which comes up it just means it's done. Then perform a hard reset and you're device should be ready to go with WM5!
Hope that helps you and anyone else who needs it.
Related
Today with jas_pik's instructions I have resetted the call duration timers successfully.
Thanks jas_pik very much,
http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,40,8283,30192#msg-30192
jas_pik
You have to find proper version of mtty ( I use mtty.exe) ,
[Enter] mean push button ENTER on yout PC
You have to type command not Copy/Paste
Turn your UNIVERSAL into Bootloader mode
Run mtty
Chose USB not Com port ( in open port setting ,nothing else)
[Enter] to got USB> propmt
Enter by typing rtask b
[Enter]
Enter [email protected]=270f,270f
[Enter]
You will see nothing after first command , after second You will see "0"
Done
Close connection
Soft Reset
You are happy
Help Me !
I want reset call duration for Univesal ( 02 Exec )
i user mtty.exe
i view :
USB>rtask b
Radio AT command debug with security check.
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SDetected one card
SD:ready for transfer OK
d.total_lba=1DC400
d.block_size=200
d.RCA=B368
d.drv_type=40000000
d.busWidth=1
Total card size=3B880000
0
atv1
OK
ate1
OK
[email protected]?1
@TALK: 0000A399
OK
[email protected]?0
@TALK: 0000714D
OK
[email protected]=270F,270F
OK
--------------
But i reset my Pocket PC not look Call Duration 00:00:00
Help me ! i dont know <value1>,<value2> of my Pocket
Edit/Delete Message
kitarovn said:
I want reset call duration for Univesal ( 02 Exec )
i user mtty.exe
i view :
USB>rtask b
Radio AT command debug with security check.
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SDetected one card
SD:ready for transfer OK
d.total_lba=1DC400
d.block_size=200
d.RCA=B368
d.drv_type=40000000
d.busWidth=1
Total card size=3B880000
0
atv1
OK
ate1
OK
[email protected]?1
@TALK: 0000A399
OK
[email protected]?0
@TALK: 0000714D
OK
[email protected]=270F,270F
OK
--------------
But i reset my Pocket PC not look Call Duration 00:00:00
Help me ! i dont know <value1>,<value2> of my Pocket
Edit/Delete Message
Click to expand...
Click to collapse
Perhaps you had the incorrect second commmand.
As jas_pik's instructions, after the first command many messages appear but at the end you see nothing, at this point you have to type correctly the second command ([email protected]=270f,270f not [email protected]=270F,270F).
help me please
USB>rtask b
Radio AT command debug with security check.
SD:Waiting for card insert.........
SDetected one card
SD:ready for transfer OK
d.total_lba=7A800
d.block_size=200
d.RCA=1234
d.drv_type=40000000
d.busWidth=1
Total card size=F500000
Wait interpeter timeout
Available time=FFFFFFFF.
i can't do it , i don;t know why , level=0 .... did i do somthing wrong ?
i need your help
task 32
Level = 0
USB>rtask b
Radio AT command debug with security check.
Read singal error D3
SD read fail!
Wait interpeter timeout
AUX_Process- FAIL, reason 13, dwRead=32, dwWritten=41
if i remove sd card , the screen is like that , please help me to fix it , thanks so much
henry said:
USB>rtask b
Radio AT command debug with security check.
SD:Waiting for card insert.........
SDetected one card
SD:ready for transfer OK
d.total_lba=7A800
d.block_size=200
d.RCA=1234
d.drv_type=40000000
d.busWidth=1
Total card size=F500000
Wait interpeter timeout
Available time=FFFFFFFF.
i can't do it , i don;t know why , level=0 .... did i do somthing wrong ?
Click to expand...
Click to collapse
You are right, after line ''Available time=FFFFFFFF."" you will see nothing but you have to continue typing the second command carefully.
After 2nd command, you will see zero (0).
i want to clear my call timers, i got this method -
Code:
1) put device in bootloader mode
2) disable activesync usb connections
3) connect to bootloader using mtty.exe
4) when you see "USB>" prompt type this (DO NOT COPY-PASTE):
USB> rtask b
0 <--- wait until you see a "0" here
ate1 <--- enable local echo
atv1 <--- verbose output for return values
[email protected]?1 <--- get outgoing call time
[email protected]?0 <--- get incoming call time
[email protected]=<value1>,<value2> <--- set incoming and outgoing call
its for hermes but i think it will work for wizard(supercid) too,
when i connect device in bootloader mode, select usb from drop down, it gives me a CMD> prompt instead of USB> prompt, also when i type usb and press enter in usb prompt it says "I already connect to USB!" anyway to get the usb prompt ? or clear lifetimer, i need to sell this at good price and get a hermes
(nevermind)
Hello
I want to upgrade my MDA3 from WM2003se to WM06.
After i have read the upgrade artikel, i have seen, that im must change this
"Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES"
And here is my problem, my 4 buttons (Mail, Explorer, Windows, ok) in front of the MDA are Defect. So i can´t confirm the Options.
Are ther other ways to do this.
MFG Kleinepelle
PS: I know my english is very bad
Logically if you map the mail button to any of the top buttons, that should work as BA still keeps the entire software prior to pressing mail button. However an expert should confirm. Dont take risk.
Upgrade without usable mail button
kleinepelle said:
Hello
I want to upgrade my MDA3 from WM2003se to WM06.
After i have read the upgrade artikel, i have seen, that im must change this
"Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES"
And here is my problem, my 4 buttons (Mail, Explorer, Windows, ok) in front of the MDA are Defect. So i can´t confirm the Options.
Are ther other ways to do this.
MFG Kleinepelle
PS: I know my english is very bad
Click to expand...
Click to collapse
Hi there ... I have the same kind of problem with my O2 XDA IIs Blueangel. The mail button along with the other 3 (home,ie,ok) are not working or not responding anytime.I was not able to upgrade my rom and format the registry hive
But then i found a much simpler way to do it..
Try the following to format your rom,clear registry hive and upgrade to a new rom-all this even with the mail button not working.
You will need the program MTTY(Attached with this post).
1) Kill activesync processes: Ctrl+Shift+Esc in Windows to bring up Task Manager. Kill wcescomm.exe and WCESMgr.exe (by selecting the task on the processes tab, and clicking the End Process button below)
2) Phone needs to be POWER + Record + Pen Reset and on Serial/USB screen. COnnect it to the PC, and it should show USB, with the backlight remaining off.
3a) Run mtty1.42.exe
b) Select USB from first list (where COM1 is displayed. Don't press USB button). If USB (or a list item containing USB) isn't in the list, then you have't connected to the PC properly.
(Leave default parameters: 8 bits / Flow Control NONE / Stop bits 1 / Parity None / Local Echo No)
c) Click OK
3) Run following commands:
[press enter first to get USB> prompt]
USB>
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
USB>set 14 0
HTCST ÚÈHTCEUSB>
6. type "task 28" to get your device formatted
USB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
7. type "task 0" to ask your device reboot
USB>task 0
USB>
8) Exit the program, then re-hard-reset (POWER + Record + Pen Reset), leaving on USB screen in order to run ROM Flasher
9)Now be back to the Usb/Serial screen and run your favourite ROM upgrade-A clean installation
Please let me know if this worked for you too. I believe this was my great geeky work i did with my BA. Was so frustrated when the buttons were not
working.
P.S: This is not my own work. I got the Mtty app from this same forum and the steps too. I am terrible sorry if i have repeated a post or done something i should not
Thank you very much.
It runs very good.
MFG Kleinepelle
Great advice! this should be placed in the wiki as well
Thanks to you and to all others <ou mwntioned for this help. Dtipex
thanks, it works!
thanks, it works!!
crabiorc said:
Hi there ... I have the same kind of problem with my O2 XDA IIs Blueangel. The mail button along with the other 3 (home,ie,ok) are not working or not responding anytime.I was not able to upgrade my rom and format the registry hive
But then i found a much simpler way to do it..
Try the following to format your rom,clear registry hive and upgrade to a new rom-all this even with the mail button not working.
You will need the program MTTY(Attached with this post).
1) Kill activesync processes: Ctrl+Shift+Esc in Windows to bring up Task Manager. Kill wcescomm.exe and WCESMgr.exe (by selecting the task on the processes tab, and clicking the End Process button below)
2) Phone needs to be POWER + Record + Pen Reset and on Serial/USB screen. COnnect it to the PC, and it should show USB, with the backlight remaining off.
3a) Run mtty1.42.exe
b) Select USB from first list (where COM1 is displayed. Don't press USB button). If USB (or a list item containing USB) isn't in the list, then you have't connected to the PC properly.
(Leave default parameters: 8 bits / Flow Control NONE / Stop bits 1 / Parity None / Local Echo No)
c) Click OK
3) Run following commands:
[press enter first to get USB> prompt]
USB>
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
USB>set 14 0
HTCST ÚÈHTCEUSB>
6. type "task 28" to get your device formatted
USB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
7. type "task 0" to ask your device reboot
USB>task 0
USB>
8) Exit the program, then re-hard-reset (POWER + Record + Pen Reset), leaving on USB screen in order to run ROM Flasher
9)Now be back to the Usb/Serial screen and run your favourite ROM upgrade-A clean installation
Please let me know if this worked for you too. I believe this was my great geeky work i did with my BA. Was so frustrated when the buttons were not
working.
P.S: This is not my own work. I got the Mtty app from this same forum and the steps too. I am terrible sorry if i have repeated a post or done something i should not
Click to expand...
Click to collapse
very well explained . good job
From IOICN: http://www.ioicn.com.cn/forum/thread-270017-1-1.html
Simple translation by Black-Xstar: http://www.black-xstar.com/blog
Author: yifengling0
Special thanks: dysxq
First, the necessary conditions:
1.dopod 5x5 mobile phone (the best use dopod 565, NO TEST other model, maybe rocker can not be used.)
2.SPL 39m version (because we calling function in spl, if you DOTNOT USE 39M SPL, VERY DANGEROUS.)
3.SD card (linux mirror and wince XIP boot from SD card)
Second, preparatory work:
1.Backup your person information!
2.download pack.zip decompression all files to SD card ROOT. (NO TEST 2G and above SD card)
3.use rom in wm6.zip to flash you mobile phone.
Third, how to use:
After flash rom, reboot you system ,you can see this menu:
1 Windows Mobile 6.1
2 Linux
3 Typhoon Bootloader
4 Debug Console
5 Reboot (WARM)
6 Reboot (COLD)
7 Power Off
Special note:
3: reboot menu from SD card
4: debug console full screen, you can input some command to operate hardware
Fourth, console introduction
# key: spaces
* key: RUN
green phone key: letter C. command start letter, input c0, press # key, can get help.
left key: letter A
right key: letter B
home key: letter D
back key: letter E
red phone key: letter F
camera key: backspace
------------
DOWNLOAD:
wm6.zip (ROM) : http://www.mediafire.com/?i5a2xzztmtj
pack.zip: http://www.mediafire.com/?xewlyyaeu3f
------------------------------------------------
my English is very POOR,maybe have some mistakes, you can see chinese version and translate with google.
picture here: http://forum.xda-developers.com/showthread.php?t=388231
translate by beerjordan0 @ http://forum.xda-developers.com/showthread.php?t=388264
This is a guide to upgrade HTC Feeler/Typhoon/Amadeus to dual os,
1.downloading the new 0109spl and then and flashing the new spl to your phone,the same as upgrading to wm6 of 39m.
2,downloading our dual os rom,you can download it at http://www.mediafire.com/?i5a2xzztmtj
then flash it on your phone by mtty, it's all the same as upgrading to wm6 of 39m.
3.downloading the pack files ,the url: http://www.mediafire.com/?xewlyyaeu3f
Now extract the pack files and copy them to your minisd card
4 turn on your mobile,enjoying it
Click to expand...
Click to collapse
so great but when will dual OS come to us?
Black-Xstar said:
From IOICN: http://www.ioicn.com.cn/forum/thread-270017-1-1.html
Simple translation by Black-Xstar: http://www.black-xstar.com/blog
Author: yifengling0
Special thanks: dysxq
First, the necessary conditions:
1.dopod 5x5 mobile phone (the best use dopod 565, NO TEST other model, maybe rocker can not be used.)
2.SPL 39m version (because we calling function in spl, if you DOTNOT USE 39M SPL, VERY DANGEROUS.)
3.SD card (linux mirror and wince XIP boot from SD card)
Second, preparatory work:
1.Backup your person information!
2.download pack.zip decompression all files to SD card ROOT. (NO TEST 2G and above SD card)
3.use rom in wm6.zip to flash you mobile phone.
Third, how to use:
After flash rom, reboot you system ,you can see this menu:
1 Windows Mobile 6.1
2 Linux
3 Typhoon Bootloader
4 Debug Console
5 Reboot (WARM)
6 Reboot (COLD)
7 Power Off
Special note:
3: reboot menu from SD card
4: debug console full screen, you can input some command to operate hardware
Fourth, console introduction
# key: spaces
* key: RUN
green phone key: letter C. command start letter, input c0, press # key, can get help.
left key: letter A
right key: letter B
home key: letter D
back key: letter E
red phone key: letter F
camera key: backspace
------------
DOWNLOAD:
wm6.zip (ROM) : http://www.mediafire.com/?i5a2xzztmtj
pack.zip: http://www.mediafire.com/?xewlyyaeu3f
------------------------------------------------
my English is very POOR,maybe have some mistakes, you can see chinese version and translate with google.
Click to expand...
Click to collapse
EMAX black-xstar?
My WQX,My 从前
where can i download the SPL 39M?
Does it work on my SDA Music (Amadeus) ??
how is this rom? had anybody tried it?
where can i download the SPL 39M?
Does it work on my SDA Music (Amadeus) ??
afshin_a said:
where can i download the SPL 39M?
Click to expand...
Click to collapse
where 2 get?
That ROM doesn't work on any machine but dopod 565
Because the Keyboard driver doesnot match.
here is my problem
stuck in bootloader.
I have a HTC Athena x7500
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed! or on my pc has a mesage error 244 invalid model id
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I tried to fix the problem with mtty
cmd> task 32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
helpe me plaise::crying:
it's been two year since I looked for a solution
sorry for my bad Englis
thank you in advance
Try This!!!
schnieder said:
here is my problem
stuck in bootloader.
I have a HTC Athena x7500
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed! or on my pc has a mesage error 244 invalid model id
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I tried to fix the problem with mtty
cmd> task 32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
helpe me plaise::crying:
it's been two year since I looked for a solution
sorry for my bad Englis
thank you in advance
Click to expand...
Click to collapse
try this,
here's an experimental program I made to make the process more automatic so users can fix their own wifi without our help.
this is good for both corrupt modelid and corrupt wifi, and fixes both at the same time.
STEP BY STEP:
1. download attachment at the end of the post for mac1.exe (requires .net 2.0 installed on the PC)
2. you will also need to download the other attachment in this post for the mtty program.
3. enter bootloader (tricolour screen) manually by pressing and holding camera button all the way in (yes I mean that, press it in as hard as you can!!), while doing a reset, then keep the camera button held until you see the tricolour screen.
4. disable USB in activesync (wmdc if you have vista - in this case, do not kill wmdc, just disable usb in it!!!)
5. run mtty and select USB option from the dropdown box!
6. then press enter in main window that comes up, see if that gives you Cmd>
7. now you should have Cmd>, if not, re-check if you did the above steps right until you get Cmd>
8. now run the mac1.exe, type in your MAC address you want to use for the Athena, if you have SPL 3.xx reported on the tricolour screen, then use the button for SPL 3.xx, otherwise if you have SPL 1.xx reported, use button for 1.xx.
9. this should have generated a .bin file for you, copy that bin file in the folder of mtty.
10. now, in mtty, type (do not copypaste!) this command: task 32
11. this should return Level = 0
12. now, you must only do one of the two following commands:
- if you have SPL 3.xx, then type (do not copypaste!!) this command: lnb filename.bin 76508000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
- OR, if you have SPL 1.xx, then the command is different (do not copypaste!!): lnbs filename.bin 75108000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
NOTE, the command starts with a lowercase "L", not "I"!
WARNING: PLEASE DO NOT MIX UP THESE TWO DIFFERENT COMMANDS!!!
if this info helps: most people will have SPL 3.xx, and if you have AP4 (not vanilla) already running then you're definitely 3.xx
13. mtty will popup a window asking "OK", you press OK!
if you get "Fail to synchronize with the host (1)", then make sure you did follow step by step. if still same error, try placing mtty and the bin file under C:\.
14. now the file downloads, if mtty reports it flashed the file, and at the end "code entrypoint unknown", then that's it, now boot back to WM and see if wifi works.
thank you for the answer
I tried with mtty and mac1.zip
here are the step
Cmd> task32
level=ff I board on my pda (cid locked)on the Spanish language HTC_304
Cmd> lnb filename.bin 76508000
invalid comand
or Cmd> lnbs filename.bin 75108000
Cmd>
no response
I do not have the mac address of my wifi on the label of my pda so I put j 11 11 11 11 11 11 is what it must have the real mac address
I do not know what to do
It's been 4 months I'm looking for a solution for my pda
help me please