hi
is there any way to increase brightness on my xda2 ?
i had upgraded it to sin merged rom and the brigtness menu only works as on & off .no dimmer action.
also i have noticed its display[illumination] was a bit brighter with previous rom .now it is dull .
is there any application to fix it ?
not sure if you can inc it more then the device is cable
but pocketplus have a slider to inc and dec the brigthness
thanks for response
after hard reset Slider is working now but poor brightness as compaired to other1.
Related
hi,
i have a problem. i own a hermes (o2's trion) and a herald (htc p4350).
on the hermes you can choose from 7 points of backlight brightness.
but on the herald you only have 4.
the thing is that the lowest level is way too dark (you can barely see something) and the second lowest way too bright/light for me (eye cancer: help).
is there a way (registry?) to make all the 4 backlight levels darker or to find a way to get between the lowest and second lowest level of the backlight?
it's really so bright now, and that also needs much more battery.
thanks very much in advance.
i think backlighting levels are on a deeper level in the machine (hardware or driver) then a registry entry can fix.
SPBPocket Plus for Herald could maybe help (read the features). But I didn't try it.
http://www.handster.com/software.php?id=6&for=HTC+Herald
I would like to recall my previous post. There is no such thing like a special version of SPB Pocket Plus for Herald. It's just fricking dynamic webpage changing according to your search
Well, we can still keep hoping at least.
it is possible ?
I'm using the KAISER, when in a building i set the brightness to low becuase it has a very bright screen and it's just a waste of battery
But when i go outside i can't see a thing, need to set it to high again
And then i just forget to set it to low again
is it possible to make it be automatic ?
(bright outside - high brightness, dark outside - low brightness)
Thanks !
p.s.
does the KAISER have a light sensor like the Universal's keyboard light sensor ?
if so, is it possible to use that ?
ah man i hear you. when my sister got her blackberry pearl, and i saw it automatically change brightness, i was jealous. aha. unfortunately, the sensor is hardware thing.
i'm not sure about the kaiser but i know the hermes has a keyboard light sensor, but it's on the keyboard, and only says whether to turn on the keyboard backlight or not. not too useful, i'd think.
Hermes and Kaiser have front cameras...
but camera is a no-no for battery
Even once a minute, or on power-on?
Well, maybe yes.
I nice Solution would be a Button you press it, and the Brightness gets configurated automaticly: perfect for battery because you do this only on need!
And there could be a standart brightness reseted after having standby on
I dont know how to use the Camera in VB.Net someone knows?
I was thinking more in the direction of the front camera and the timer ....but bettery above all .... if it is possible it would be awsome !
the buton pressing idea is (forgive me) pointless ... if i wanted to press a button i might as well press the on screen button i already have ! (spb mobile shell)
thanks for the idea though !
it's great to see so many people taking interest, hope it will stick !
SPB software is my solution. You can map your jog dialer for brightness. I use that for volume, so I use touch screen to slide my brightness.
http://www.spbsoftwarehouse.com/products/pocketplus/?en
look at the screenshot or demo. Map the brightness as botton4 is a option because brightness is a program link for you to set what ever button as you wish.
blah, i have an at&t 8525, so i forgot about the front facing camera. my current solution is to set the backlight to reasonable indoor setting, and i have VJLumos mapped to my Button5 press&hold. so whenever i go outside, I run VJLumos, and when I get back inside, I run VJLumos again (which turns it off) and it automatically goes back to the previous backlight setting.
Hey everyone! I am new to this forum - but i have already had so much use for it! Bought a Universal a month ago, upgraded to WM6 and everything runs just great except for this:
Is there any way to adjust the backlight's brightness beyond the levels available in the Control Panel? Even on the lowest setting, the screen is still very bright if you're reading in an otherwise dark environment.
Any help or pointer to working third-party solutions would be greatly appreciated.
I have seached the forums and tried Tornado Low light - which just seemed to switch off the backlight.
Fast reply,
NO You cant!
The min. brightness setting is 1 and can't be changed lower.
thank you for the answer!
sort of sucks though... sure makes me miss my palm
I've just bought a Touch 3G and as far as I can tell the Auto setting for the Backlight doesn't seem to do anything. As my last phone (P3300) didn't have this, what should I be expecting to happen? I've tried putting a finger over what I think is the sensor (right hand "LED", beside speaker) and nothing changes.
Thanks, W.
Did you set Auto adjust backlight in system menu?
Imho it is a really subtle effect. You can see it a bit when holding the light sensor (right to the speaker) to a bright light source. The display then gets a little bit brighter.
If you would like to increase the effect or customize the stepping, try g-light ( http://www.ageye.de/index.php?s=glight/about ), it lets you set specific values for each reported value from the sensor, and set the polling interval
Jade auto adjust is poor
I had the diamond prior to purchasing the jade. The diamond auto light adjust was very noticeable compared to the jade. In fact I didn't think the Jade even had a light sensor until one of the other users pointed it out.
After a little research I found this thread. http://forum.xda-developers.com/showthread.php?t=450318
I used it on my Jade and it works great. One of my problems with the diamond was the fact that the light would not automatically dim enough in low light conditions.
Thanks for the link. Now using G-Light which works pretty well. Not perfect as its sometimes a bit erratic but certainly makes better use of the light-sensor than HTC!
Hi!
I wonder if there is a way to lower the backlight levels on auto adjust (or increase for those who think its still not bright enough). Point is I think having the backlight on generally lower levels will naturally increase battery life. I know I can change the the brightness to a fixed level that suits me - but that would just be right for the current situation. I still want it to adjust to different lighting situations. Ideas?
It would be nice if it was possible to change how dim the backlight gets on total darkness and how bright it gets on your average sunny day.
I've been messing around with the reg to see if I could find max and min values but I can only change manual settings, not auto mode using the light sensor.
One note though: The sensor itself uses battery to measure ambient light. That being said, if you spend most of the day under a constant light source (say an office) manually dimming the device should consume less energy since the sensor is not doing much good for you anyway.
I guess it's not your case. I had this app on my Cruise to change backlight intensity. never used until now. it works on leo (running 1.48 but that should not matter) and changes backlight in 25% increments. You can copy a shortcut to the startmenu and add a quick link to your home tab or map it to a hard or soft button somehow.
I wold really like to know how to change max and min levels on auto backlight.
Try Lumos - it's a backlight replacement that allows you to customise how you want your auto backlight to work, ie. what the minimum/maximum brightness is, how fast the backlight changes, etc.
http://forum.xda-developers.com/showthread.php?t=450318
Seems to work fine. Still some tunning to do. Thanks!
I'm using Lumos now and it works great! Simple to set up and easy to customize. Thanks for the hint!
lumos is great but I found it was draining the battery quite fast on the leo.
Admittedly I was using it with the wm6.5 Check for active programme only setting. I never tested it to see if it worked without checking that box.
As far as I can tell by now the batterylife appears to be rather better than before. I haven't put in any application exceptions and didn't check the one checkbox in the settings tab. I also use a custom curve where the backlight stays at 30% until the sensor hits about 400 (30% is plenty in my opinion and still brighter than my friend's iphone in normal light condition inside).
you should try AutoLight http://forum.xda-developers.com/showthread.php?t=548402
it works fine on Leo