Hey everyone! I am new to this forum - but i have already had so much use for it! Bought a Universal a month ago, upgraded to WM6 and everything runs just great except for this:
Is there any way to adjust the backlight's brightness beyond the levels available in the Control Panel? Even on the lowest setting, the screen is still very bright if you're reading in an otherwise dark environment.
Any help or pointer to working third-party solutions would be greatly appreciated.
I have seached the forums and tried Tornado Low light - which just seemed to switch off the backlight.
Fast reply,
NO You cant!
The min. brightness setting is 1 and can't be changed lower.
thank you for the answer!
sort of sucks though... sure makes me miss my palm
Related
Hi all.
Dont flame me for this strange request.
My bed side clock is about to die so instead of getting a new one, I am thinking of using my universal as a replacement. My problem is that having the display on even with the backlight set to minimum is too bright for night time use.
With the backlight turned off the display is useless when pitch black so does anyone know of an application I can use that'll allow me to have the backlight on all night whilst charging on a very low setting so that it can be seen in the dark but not light up the whole room.
I assume the built in alarm function will wake me in the morning so dont need to replace that...
Any thoughts would be appreciated.
Good luck trusting any Windows Mobile-powered device to wake you up reliably. I thought my Exec was better than my XDA2 but no. It still fails from time to time.
However, if your machine is to be left turned on all night (on charge) then there's a possibility it might be reliable. I'd run it alongside your alarm clock for a while though before trusting it.
I like the idea of the app you request. vijay555 managed to get the screen backlight to respond to settings above the normal control panel range with his VJLumos app - perhaps it can also be set lower using a similar method.
You'll still need a large enough clock display to be readable with blurry eyes at night though.
Incidentally, you can set your Exec to turn the backlight off after (say) 30 seconds of inactivity, but then use the backlight hardware key (next to the volume slider) to turn the screen backlight on again when you need to know the time in the dark.
Just a suggestion
ptravelalarm is an app that displays big clock digits, in landscape mode too. Perhaps worth checking out in conjunction with the backlight hack? oh, and it features loud alarms with volume override too.
Pocketclock is another app but is only 2003 compatible though i kow there is a beta wm5 version available. Not sure when it will be released fully, or if it will support landscape mode (which the beta didn't).
Have a look at 'stoptime'....
And yes it's reliable ! I used it for months for taking my medication (and it's dosing was quite time-dependant !)
jpiek said:
Have a look at 'stoptime'....
And yes it's reliable ! I used it for months for taking my medication (and it's dosing was quite time-dependant !)
Click to expand...
Click to collapse
are u using this app on a wm5 pda? I checked out the site and it seems to mention 2003 and earlier, plus no updates since 2004?
No, on a WM2003 ...
jpiek said:
No, on a WM2003 ...
Click to expand...
Click to collapse
According to the thread title it's for use on a Universal, therefore wm5 (unless he's seriously tweaked his roms ). Shame, because it looked interesting...
Here's what I have as my Alarm.....
It is SPB Time v.1.1 which you can find here :
http://www.spbsoftwarehouse.com/products/time/?en
In the picture below, it is set as BLACK CLOCK and also displays the calendar aside from the time in Digital format.
There a lot of diffeent skins available for free and also you can choose between analog, digital or world clock....
phupton said:
My problem is that having the display on even with the backlight set to minimum is too bright for night time use.
Click to expand...
Click to collapse
seconded. The minimum backlight brightness setting is way too bright. Is there any way to influence this in the registry?
the big clock display looks great with that spb product. Just need a hack to sort out the bright display at night time now.
Its not something I can do but if anyone knows of someone that might be able to help then point me in their direction...
I use the ptravel alarm on a daily basis, as commented above though, the dim setting is still bright enough to light the room. If that can be dimmed further then will be fantastic.
As for relibility, the only time it has failed when on mains was due to finger trouble...
I'd suggest something like that Big-Clock from SPB, if you run the Exec while it's plugged in the backlight will stay lit - all you need is a black background with dark coloured numerals so that the light output isn't that much (on lowest backlight obviously).
You'd ALSO need to turn off the flashing LEDS - I've discovered these are really very bright in a darkened room and very irritating.
Chronos is also very good, only analogue clocks though, although it says it is skinable and I would like it in digital...
Anyone know how to skin Chronos???
http://www.activekitten.com/en/games/detail.php?ID=351
Regards Simon
hi,
i have a problem. i own a hermes (o2's trion) and a herald (htc p4350).
on the hermes you can choose from 7 points of backlight brightness.
but on the herald you only have 4.
the thing is that the lowest level is way too dark (you can barely see something) and the second lowest way too bright/light for me (eye cancer: help).
is there a way (registry?) to make all the 4 backlight levels darker or to find a way to get between the lowest and second lowest level of the backlight?
it's really so bright now, and that also needs much more battery.
thanks very much in advance.
i think backlighting levels are on a deeper level in the machine (hardware or driver) then a registry entry can fix.
SPBPocket Plus for Herald could maybe help (read the features). But I didn't try it.
http://www.handster.com/software.php?id=6&for=HTC+Herald
I would like to recall my previous post. There is no such thing like a special version of SPB Pocket Plus for Herald. It's just fricking dynamic webpage changing according to your search
Well, we can still keep hoping at least.
While playing with my HERMES I noticed the following:
First:
The screen is not as bright as on the WIZARD!
Second:
When turning on the camera you shortly can see that the backlight gets increased while opening the CAMERA application. Now, that tells me that there could be a way to increase the background backlight permanently over its default maximum.
Has anyone an idea? I tried already to raise the registry values for backlight without success.
VJ's
There is a program by VJ called super bright I believe it what you are looking for, if so post a little love for VJ's hard work here is the link
http://www.vijay555.com/vj/releases/vjlumosiii/vjlumosiii.exe
Well, it makes the screen nice and bright - that's for sure!
The drawback's on this neat little application: You can't shut it down other than restarting the PDA, you can't adjust brightness and you can't use the CAMERA as long as the application runs.
I just wonder if the brightness could be increased via Registry Hack - that would be great!
how very odd! i've noticed that comparing my Vario I (Wizard) with my Vario II (Hermes) the Hermes has a considerably better and brighter screen! the colours are a lot more 'fuller'!
i havent tried the 'VJ' app, but will do when i get home,
why would you want it so bright anyway?!
Well, the brightness helps while watching a movie on the go!
Also if you do some work on the road or navigation in the car it comes in handy. I just wish the application mentioned above would not have so many side effects ...
Junner2003 said:
Well, it makes the screen nice and bright - that's for sure!
The drawback's on this neat little application: You can't shut it down other than restarting the PDA, you can't adjust brightness!
Click to expand...
Click to collapse
I just 'click or ok' Super Bright the same way to turn it on or off (no pda restarts needed).
Run the program again to shut it off. I mapped it to one of the hardware buttons.
Thank you vijay555!
Hi!
I wonder if there is a way to lower the backlight levels on auto adjust (or increase for those who think its still not bright enough). Point is I think having the backlight on generally lower levels will naturally increase battery life. I know I can change the the brightness to a fixed level that suits me - but that would just be right for the current situation. I still want it to adjust to different lighting situations. Ideas?
It would be nice if it was possible to change how dim the backlight gets on total darkness and how bright it gets on your average sunny day.
I've been messing around with the reg to see if I could find max and min values but I can only change manual settings, not auto mode using the light sensor.
One note though: The sensor itself uses battery to measure ambient light. That being said, if you spend most of the day under a constant light source (say an office) manually dimming the device should consume less energy since the sensor is not doing much good for you anyway.
I guess it's not your case. I had this app on my Cruise to change backlight intensity. never used until now. it works on leo (running 1.48 but that should not matter) and changes backlight in 25% increments. You can copy a shortcut to the startmenu and add a quick link to your home tab or map it to a hard or soft button somehow.
I wold really like to know how to change max and min levels on auto backlight.
Try Lumos - it's a backlight replacement that allows you to customise how you want your auto backlight to work, ie. what the minimum/maximum brightness is, how fast the backlight changes, etc.
http://forum.xda-developers.com/showthread.php?t=450318
Seems to work fine. Still some tunning to do. Thanks!
I'm using Lumos now and it works great! Simple to set up and easy to customize. Thanks for the hint!
lumos is great but I found it was draining the battery quite fast on the leo.
Admittedly I was using it with the wm6.5 Check for active programme only setting. I never tested it to see if it worked without checking that box.
As far as I can tell by now the batterylife appears to be rather better than before. I haven't put in any application exceptions and didn't check the one checkbox in the settings tab. I also use a custom curve where the backlight stays at 30% until the sensor hits about 400 (30% is plenty in my opinion and still brighter than my friend's iphone in normal light condition inside).
you should try AutoLight http://forum.xda-developers.com/showthread.php?t=548402
it works fine on Leo
I want to ask you something. On direct sunlight the display light is not enough, when I manually set it to 100% the display is much more bright and everything is ok, but when is AUTO, it wont go to maximum never! I'm asking is there any tweak for this, or anyone who knows how, to be kind to make something about this.
Hey - there's a couple of programs that can manage the light sensor instead of the default built in one.
First i used lumos however i found it wasn't that customisable. Yesterday i found a program called AutoLight which works by adjusting a graph to how you want the backlight to change according to the ambient light. Works really well so far!
Just search for them on here and they'll come up.