Hi
My GPRS is activating itself and the active sync displays opens every few minutes. Anyone know how I can disable this?
Thanks
Matt
Look in options in activesync on your xda, i think theres an option to disable mobile scheduling.
Related
Hi,
I'm using xda 2.
when I open the GPRS connection manually, it stay connected until I disconnect it.
When the connection is open automatically (when I use the internet explorer, or using any other application that use a gprs connection) the connection disconnect if I don't use the device for a minute or two.
If I continue to use the device, the connection don't disconnect.
Is there any setting that will prevent the device to disconnect.
I develop application that should synchronize to SQL server, the synchronization takes 15-30 minutes, during this time the user don't use the device...
thanks,
Ofer
Ive got the same problem.
Im using my Qtek 2020 as a Wmodem for my laptop for the moment.
If i connect, i disconnects after a few minutes and there is no speed.
But if i softreset the device and reconnect to the modem, everything works fine for a couple of hours. Then it disconnects, and i have to softreset again to make it work...
Really annoying, and took me quite a WHILE to figure out how to get it to work.
Would be very nice to know that kind of ****ed up bug this is..
Sounds like you need GPRS Tweak (freeware)
http://www.gb-soft.cz/xdaii/product_gprs_tweak_en.htm
Thanx, i think it works.. Just installed it, and put it on GPRS always ON
GPRS Tweak
I also installed GPRS Tweak but when I perform a soft-reset it don't start GPRS automaticly.
What have I done wrong?
Ger
Go to the second settings tab, there u have som settings for GPRS starting.
Although, this program didnt fix my problem. I still have to reboot everytime
i have used GPRS for 2 hours. For some reason, it resets GPRS after a random set of time... Really annoying.
my cellphone load gets suck out most of the time because it connects to the internet on its own, is there a setting/program that prompts me first if i want to connect to gprs...
many thanks
Hi,
Your phone is most likely trying to connect to check your email. To prevent this happening, from your Inbox select Menu/Tools/Options. Click on your email account, press Next till you reach page 4 then Options. De-Select the box which says 'Connect and check for messages every:'
Hope this helps.
GPRS connection
I have a similar problem using exchange push email. I have established an Internet connection with WLan and checked that I can access my webmail (which is my Exchange mail). Despite this to update email the phone automatically connects GPRS - this is really annoying. I read once that this is set in the registry when one installs the operator customisations. Can anyone tell me how to change this?
this tool
http://www.gb-soft.cz/xdaII/
can be set to auto disconnect gprs after x seconds/minuts
GB Soft Tweak
Thanks for the suggestion.
I tried this and it doesnt seem to fix the problem. Although I am not excactly clear on the settings.
I tried the Turn Off GPRS option with a 5 min setting, trued Search GPRS [G] on start radio and Search [G] on start GPRS connection.
With regards
Jeff
hey. I check my email with the outlook express feature (the same place where you get text messages, etc.) I have it setup to check my mail every hour, but after it checks for mail it stays connected to the GPRS feed, making me miss calls. is there an option I'm missing or reg tweak that automatically disconnects the GPRS after it connects and "send/receive" email?
Thanks,
Check this bit of freeware out - it sounds like what you're after. I have never had any problems with it.
GB-SOFT GPRS Tweak 02.04.2004
http://www.pdagold.com/software/detail.asp?s=265
i installed the program. i works well, accept it disconnects the GPRS 10 minutes after connecting to streaming audio. is it not working properly, or can the software not recognize streaming audio? everyime i want to listen i have to change the setting from "auto-disconnect if GPRS isn't in use" to "always leave gprs connected." Any suggestions?
Thanks,
Is there a way to make GPRS connection "ask before connecting" ?
Currently, I have wifi connections connecting to internet and 2 GPRS connections which I like to use when there is no wifi.
However, I don't want it to use GPRS unless I want. So I would like to use "ask before connecting" if there is such an option.
How can I achieve this ?
Also, sometimes some applications (Msn Live, Hotmail) connect to GPRS when there is already wifi reaching to Internet.
How can I change this behaviour ?
(I don't want to use GPRS if I'm connected through wifi)
Hi
I hear good things about Danielherrero's bandswitch app. This is a long thread and I think there are revisions along the way so best read through a sample of the pages:
http://forum.xda-developers.com/showthread.php?t=286844&highlight=danielherrero
Mike
hi mike,
are you sure that application is related to my problem ?
I've read first 6 pages of it and couldn't understand it...
I'm using activeSync, and everything work perfekt...
as long as I've WLAN on, it uses it... but when I loose the WLAN connection (eg, I go away from home), activeSync uses my GPRS connection to sync my mail.
here lays the problem... after it have synced... it doesn't close down the GPRS connection... its allways stays "connected"... how come? or am I missing some options?
is there any way to shut down the connection manully? I would prefer to the connection do close automaticly after it has synced...:
Strange
There is no reason GPRS should stay connected after it finishes, it might take a little while to disconnect but it should disconnect all the same.
There are some registry tweaks to make sure but you will have to get a program like Advanced Configurtion to help.
Hopefully someone that uses cell data connections can be more help.
nabil_akhlaque said:
I'm using activeSync, and everything work perfekt...
as long as I've WLAN on, it uses it... but when I loose the WLAN connection (eg, I go away from home), activeSync uses my GPRS connection to sync my mail.
here lays the problem... after it have synced... it doesn't close down the GPRS connection... its allways stays "connected"... how come? or am I missing some options?
is there any way to shut down the connection manully? I would prefer to the connection do close automaticly after it has synced...:
Click to expand...
Click to collapse
Well dear .. it's an easy thing to be fixed ..
Go to ActiveSync .. tap Menu . . Schedule ..
and then change it to " Manualy "
and that's it