when i first got my mda II it worked fine, but after an hour of so, after i turned it off, it wouldnt turn on again. after fiddling with it, i got it to turn on again by pressing the call button, then really quick after pressing the on button, but that only works sometimes. the only sure bet to turning it on again is a soft reset, which is VERY inconvenient... it anyone has any idea whats going on, PLEASE help me
thanks alot
Power on problem!! MDA II after upgrade to wm2003se
Hi,
I've got the same problem. I bought MDA II with wm2003. Fiew days after I installed wm2005 but it was unstable and many programs didn't working correctly so I downgraded it to wm2003se. Everything looks quite ok except the problem with power on with no activity (sometimes it srarts with power_on+red_call pressed at the same time but after that green led no blinking).
Now this is:
ROM version: 2.06.00WWE
ROM date: 06/14/04
Radio version: 1.18.00
Protocol version: 1337.38
ExtROM version: 1.72.165
Is there any idea to resolve this problem?
Best regards,
Slawek
Hi...
I upgraded my qtek 9100 from OS version 1.6.7.1 to cingular 1.8.11.1
The problem is that now, the phone doesn't start... the splashscreen appeears, along with... IPL 2.17
SPL 2.21
GSM 02.07.10
OS 1.8.11.1
But doesn't get out from there...
Did a do anything wrong?
PLEASE help me?
Is there any solution or is it bye bye qtek?
maybe you flashed broken or wrong rom.
start your device in bootloader mode (look in wiki how to do this) and then reflash again and if this does not work, get rom from your provider and reflash with this.
...
But my pda starts and it stays in splashscreen... is it repareble anyway?
Yes it should be fixable
Cant understand why you would want a old cingular rom (the cingular is not exactly same hardware as your phone wiza200 vc wiza100!)
You should download an aku2 rom here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
user name xda password xda
Next get into the bootloader screen - turn device off and start with camera button pressed - should be a multicolor screen
Next attach device to pc via usb cable
Flash with above rom and all should be well
Hey guys, i have just recieved a replacment MDA Pro from t-mobile as the last one froze on the bootscreen after a rom upgrade.
Now this MDA Pro has come with the new rom preinstalled on it version:
Rom 1.30.114 WWE
Radio 1.10.03
Ext Rom 1.30.232 WWE
But i have this problem where it will constantly freeze. If i am using the camera and i press the right button on the D-pad so i can go to video mode it freezes and i need to give it a soft reset to get it working again, sometimes it seems like if i push it in the back of the phone it just switches off and gives me a white screen.
Has anyone else out there found this sort of problem or know how i could fix this?
Last night I flashed my MDA Compact II with a ROM in this forum. It's from the thread: Tuning ROM 2.6.2.27 MDA CHARMER(MDA COMPACT II). The ROM update seemed to go okay, but now the Charmer won't boot. All I get is the splash screen, which says:
IPL 1.12
SPL 1.12.0000
OS 2.6.2.27
After about 20 - 25 seconds, the background does this fade-out effect and then the phone reboots. Also, I get no charge indicator light when the phone is plugged in (power or USB). Does anyone know how I can fix this or why this is happening?
discharge said:
Last night I flashed my MDA Compact II with a ROM in this forum. It's from the thread: Tuning ROM 2.6.2.27 MDA CHARMER(MDA COMPACT II). The ROM update seemed to go okay, but now the Charmer won't boot. All I get is the splash screen, which says:
IPL 1.12
SPL 1.12.0000
OS 2.6.2.27
After about 20 - 25 seconds, the background does this fade-out effect and then the phone reboots. Also, I get no charge indicator light when the phone is plugged in (power or USB). Does anyone know how I can fix this or why this is happening?
Click to expand...
Click to collapse
1. dowenload this t-mobile official rom
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
discharge said:
Last night I flashed my MDA Compact II with a ROM in this forum. It's from the thread: Tuning ROM 2.6.2.27 MDA CHARMER(MDA COMPACT II). The ROM update seemed to go okay, but now the Charmer won't boot. All I get is the splash screen, which says:
IPL 1.12
SPL 1.12.0000
OS 2.6.2.27
After about 20 - 25 seconds, the background does this fade-out effect and then the phone reboots. Also, I get no charge indicator light when the phone is plugged in (power or USB). Does anyone know how I can fix this or why this is happening?
Click to expand...
Click to collapse
Also the problem is that youve still got v1 bootloaders (IPL + SPL 1.12) Once youve downloaded the official tmobile rom and installed it, you'll have v2 bootloaders and can go back to using that tuning rom properly.
Thanks for the replies. I was able to flash the rom through bootloader mode, and now I'm up and running. Thanks!
Where is the link to Tuning Rom download ? I wanna try it
Last night I flashed my MDA Compact II with a ROM in this forum. It's from the thread: Tuning ROM 2.6.2.27 MDA CHARMER(MDA COMPACT II). The ROM update seemed to go okay, but now the Charmer won't boot. All I get is the splash screen, which says:
IPL 1.12
SPL 1.12.0000
OS 2.6.2.27
the i was told by a senior menber to flash it with BUTTON 1.05 (which i did)
and now BATTERY IS NOT CHARGING
and now i have
ipl 1.01
spl 1.12.000
gsm 01.12.10
os 1.5.4.2
i have checked usb cable , main power charger with other pda and it was working ok
now i can keep my mda compact 2 alive once it is plugged in via main power charger only. i dont have any facility to recharge my battery on another charger.
plz plz help
Dischargee
i hope some one can help
Im having exactly same problem, please help someone, i dont want to lose my mda
shayd said:
1. dowenload this t-mobile official rom
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
Click to expand...
Click to collapse
thank youuuuuuuuuuuuuuuuuuuu thank you
It dosn't work in my Charmer. My RUU dont see PDA
my mda compat 11 is frozen on the tmoible screen
srox said:
thank youuuuuuuuuuuuuuuuuuuu thank you
Click to expand...
Click to collapse
hi ,
i flased the tmobile rom with ur given link now it doesnt go past the initial screen
all it says is
ipl 3.08
spl 3.08
gsm 02.69.21
os 3.8.2.21
and stays ter all day until battery goes dead.
please help me let me know hw can i get my phone up and running.
shayd said:
1. dowenload this t-mobile official rom
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
Click to expand...
Click to collapse
Thank you very much for this guide,I have been able to repair a BRICKED MDA Charmer and now,IT WORKS!!Thank you!!
I can not get my M600 Prophet to load the OS, it just freezes on the Splash screen (Jester's Edition AKU 2.2).
Anyone got any idea's on how to get this to boot up.
Now loaded with the following:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
I got the same problem few time ago you have to put your m600 in bootloader mode that way :
"Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)"
Then you have to flash your device with a working rom
good luck
If that doesn't work, make sure you don't have your memory card inserted. Take it out and then try the hard reset.