\HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ALLLEDMgr
just change the index from 1 to 0, then softreset.
but it will turn off not only the gsm led, but also all flash of led(BT,Charge)
set the key back to 1 to get the led flash back.
harlemyin said:
\HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ALLLEDMgr
just change the index from 1 to 0, then softreset.
but it will turn off not only the gsm led, but also all flash of led(BT,Charge)
set the key back to 1 to get the led flash back.
Click to expand...
Click to collapse
i hve just found, that it seems will not turn off the led for charge.
by BT i am not clear.
is it possible to change the led color ?
example :
green for bluetooth and blue for other....
Related
The left-upper green led on my Wizard is always and continously on for some reasons since a few weeks. Does anyone known how this could have happened and (even better) how to turn it off?
Thanks!!
That sound to me like you have WiFI turned on.
I dont know why it should be on continuously as it normally flashes.
Just check that you have both Bluetooth and WiFI turned off in the comm manager.
Sounds simple I know but sometimes........................... :lol:
Wifi is off (upper right, my erronous led is upper left)
Bluetooth is off
Pushmail is off
thanks for the answer though. any other suggestions?
gaviaal said:
Wifi is off (upper right, my erronous led is upper left)
Click to expand...
Click to collapse
Thats strange! When I turn my WiFI on, my upper left led flashes green, if I turn bluetooth on, that same upper led flashes blue.
The right hand led's on mine are as follows.
Green Flash = normal operation
Orange constant = charging
Orange flash = missed call or message
Don't know why yours should be different.
I have uploaded a scan from my user guide.
WM5torage uses the LEDs to indicate disk activity. If you have used it recently, and forgoten to turn off USB mode, the LED may stay lit in "ready" mode. May be worth checking to see if that's active...
If that's not the case, it may be that the PDA still thinks that it's plugged in and receiving charge (I think there's a variable that's normally changed, that might not have been set to "charging = false" or whatever it is. Might be wrong, someone correct me if I am.
If neither of these things are the cause of the problem, then sorry, can't think of anything else...
I don't think I've ever used WM5torage (never heard of it until now) and the phone has been turned on and off several times.
any other ideas?
What happens when you soft reset?
Does it come back on IMMEDIATELY at the boot loader screen?
Or does it come on once Windows Mobile loads all the way up?
This could tell you if it's a hardware problem or software problem.
Good thinking:
It comes back on IMMEDIATELY at the boot loader screen.
hardware issue: what can I do about it? return it to vendor, but then i'll be without my phone for a month (again). can i disable the led? other ideas?
Isn't the flashing green light supposed to flash amber if there's a missed call or unread text message? I know this used to be the case when I had the Vario 1 (Wizard), so wondering whether my Vario 2 (hermes) isn't working properly.
or maybe you just dont have it set to do that?
silly me... I had this set on my old phone for so long I forgot that it's not a default setting. Sorted out now. Thanks.
May I ask what software did you use for this?
You don't need software, just go to start, settings, sounds & notification, choose the notifications tab, and then from the drop down list, select the event you want to have a flashing amber light for (e.g. Phone: Missed Call), tick the box 'Flash light for' and choose the length of time.
Mine flashes amber all the time. I do have those settings enabled, but it never has flashed green, although it glows greenwhen fully charged. Ideas?
AlbertoM said:
Mine flashes amber all the time. I do have those settings enabled, but it never has flashed green, although it glows greenwhen fully charged. Ideas?
Click to expand...
Click to collapse
Never mind. Rebooted, all is well....d'oh!
how can i turn off blinking green and blue leds during the normal operation?
I saw this reg hack on a xda post, but it looks like it also turns off vibrate:
"Figured it out! I changed a reg key to turn off the blinking LED indicator and apparently that key also controls the vibrate function."
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\AllLEDMgr
Key = Index - 0 or 1
There is also a CAB file available in this forum!
Look around for that post, this is probably the best solution........
Is there an application which control the blinking lights in XDA IIs? I find it annoying to see blinking green, red and blue lights.
one way, which was working under wm5 is to change the registry entries...
To turn off the Blue LED from coming on with Bluetooth go to:
1. Hkey_Local_Machine/Drivers/Builtin/BWLEDMGR
1a. Change the Index value below it to "0" it is currently set to "1
Soft Reset and the Blue LED will not turn on.
Here is a revised procedure for turning the Green LED off. Cabrio came up with this.
2. To keep the Green LED from flashing or coming on at all go to
Hkey_Local_Machine/Drivers/Builtin/NLEDMGR leave the dll name as NLEDMgr.dll
2a. Change the Index value below it to "0" it is currently set to "1".
This seems to completely shut off the LED and keeps it from getting called up.
Make sure you soft reset after making the reg. change.
the other way is to use tweaks 2k2
http://www.tweaks2k2.com/portal/index.php
it was working under wm5 too...haven't tried it on wm6yet...cuz i simply like the leds and think it's useful...
Thanks nyuzsi. Will try that out.
you are welcome...
How do i remove the blinking wifi connection?
nyuszi said:
you are welcome...
Click to expand...
Click to collapse
I have a samsun s4 i9505, and since a month or so , when i connect the phone to charge and the displlay goes of the red led that is supposed to stay on its not, also when tyhe low battery either.
I have try the menu *#o*# and in the test of the leds the red it is on as the blu opr green.
I have clean up my phone with a hard resert and even witout any applications intaled only the ones that came with the phoe the led doesnt work.
I looked at the adjust display led configuration and the option it is marked.
And dont know what more to do, i any of you have the same problem please let meknow if you get the solution for that.
I also have tried programs to ontrol the leds but still not working, i have vhange the color notification for whatsup from lue to red and nothing i get the messages but the led doesnt blink as just before foes.
Please HELP
Thanks
Try to put ur phone charging and press the button Power one time (Lock/Black screen). Tell me if the RED LED appears :highfive:
EDIT: Go to APPS - SETTINGS - MY DEVICE - LED and tick all options
Joku1981 said:
Try to put ur phone charging and press the button Power one time (Lock/Black screen). Tell me if the RED LED appears :highfive:
EDIT: Go to APPS - SETTINGS - MY DEVICE - LED and tick all options
Click to expand...
Click to collapse
I did what you say anf the led doesnt appears
I think is maybe something wrogn with the red led because if i changw the coloeçr to blue during the chrge works
USING LIGHT MANAGER I CAN PUT ONLY BLUE AND GREEN ANY CMBINATIONS WITH RED DONY WORK
Joku1981 said:
Try to put ur phone charging and press the button Power one time (Lock/Black screen). Tell me if the RED LED appears :highfive:
EDIT: Go to APPS - SETTINGS - MY DEVICE - LED and tick all options
Click to expand...
Click to collapse
Yesterday i tryed again what you told me and the red light appear but only for a few seconds after that when out again.
Thats helps.