Hey guys n' girls,
I need a few spares for my XDA 2 (these are gonna seem odd, but what the hell); the things i need are:
1. that crappy rubbery cover that goes over the headset jack, i lost mine, i dunno how.
2. The back cover that goes over the battery, i ruined mine, lol. dont ask how!
3. The piece above the battery cover, (the other cover, lol) it covers the camera module/aerial piece and the little circle rubber thing that goes over the external antenna connector.
4. I need a spare battery as well (preferably a higher power/capacity one; does the XDA 2i one work in the XDA 2? if it does then i need an XDA 2i battery)
5. A new Headset, I messed mine up completely!! no joke, i still have it but i dunno how to fix all the wires back together; besides the volume control is messed up, so its not worth putting the wires back together!
6. I also need the volume control switch; the one on the side, i dropped my XDA 2 and the ridges on it got flattened! Bloody trains; the rides are never smooth!
Thas it, if anyone has any or all of these (basically has an XDA 2 which doesnt work at all, and can provide me with these spares, then it will be much appreciated! i know some are weird spares but its urgent and i need them! let me know anyone, i'll obviously pay for the parts!)
Thanks!
Related
can any1 help me out here i just bought an 8525 for 80 off a co-worker he didnt want it because it keeps turning off on him i think its a few loose connections...theres a bit of play in with the battery but anyhow changed batteries same thing so any one know what part i should be replacing and also where i can get parts for this phone. i have tried looking on the site that i use for my other phones but all i find are screens and black housings so if you guys can help me out i'd love it
anyone im looking at it right now and all seems well and i tested the battery on a different fone and everything is green just cant figure it out. also just found out that my jogwheel is broken
That could explain why the co-worker sold it to you for 80 bucks.. .. you might be able to find parts on Ebay .. see if anyone is selling one with a busted screen or something..
thats exactly ehy i got for 80 i knew what it was just hoping for an easy fix i do repairs tho so no biggie just gotta find the parts thanks ill start looking once my ass friend gets off myspace!!!
It can't be a "loose connection" unless the solder from the battery connectors came loose because he battery connectors are connected right to the board.
thats one thing i noticed also the prong look like they have been squished down almost flat instaed of < they are more - but not that bad and there is quite a bit of playu from the battery compared to my good 8525 oh well maybe i can come up on a third and swap out parts. thanks for the help guys any other suggestion i have already kinda fixed the prongs. and now the phone wont even turn on this suck but i know this can be fixed
hey does any1 have a broken hermes they wouldent mind getting rid of i need parts or if ppl wanna be nice to me and my thin wallet and donate their old broken hermes to me i would really appreciate it
Gyngabread Man said:
hey does any1 have a broken hermes they wouldent mind getting rid of i need parts or if ppl wanna be nice to me and my thin wallet and donate their old broken hermes to me i would really appreciate it
Click to expand...
Click to collapse
I dealt with a similar case a while back. Going off randomly. In his case it turned out it was the battery connections. They had lost some of their spring tension and he was unwilling to try bending them out a little for fear of causing more damage. In the end we decided that he would try placing a strip of card between the battery and the casing on the side opposite to the battery connections. ie. to press the battery more firmly against the connectors. How thick it would need to be would depend on how squashed the connectors are.
It worked for him and he decided just to leave it in place.
Mike
@Gyngabread Man
If you cant fix it let me know. I need the vibrate motor. And no im not kidding
My wiz (which I love) has developed a loose usb port. It is out of warranty (of course!), and it is not the first MDA to have this issue (I returned 3 over that past almost 2 years for the usb coming loose). It has not fallen out yet, but charging is a chore, as I need to have my plug in the usb in a special way to get it to connect and charge.
Long story short...
Is there a physical fix I can do on my wiz? Since it is not under warranty, I am not too concerned about taking my MDA apart...so...
Can someone who has had this issue tell me in a step by step manner, how to take the MDA apart and "tighten" the MDA port???
I am hoping to hold out long enough to get the Kaiser...if Tmo ever releases it.
Thank you in advance.
**I have search this forum and even googled...people list sites for $60-100,or say to take the MDA apart and solder it back...I'm broke and wanna go with the second option, but haven't found a step by step about how to actually take the wiz apart and re-solder the usb port**
I'm gonna be unhelpful so if you want to get mad at me, do it now.
I ask what I'm sure others are asking themselves: WHAT have you been doing to your MDAs where the usb port has been getting loose?! Three times?!
I ask not to be embarassing but to help other users from prevent damage to their devices.
Azazello said:
I'm gonna be unhelpful so if you want to get mad at me, do it now.
I ask what I'm sure others are asking themselves: WHAT have you been doing to your MDAs where the usb port has been getting loose?! Three times?!
I ask not to be embarassing but to help other users from prevent damage to their devices.
Click to expand...
Click to collapse
Yes, I am quite pissed at you now...
The first one was a replacement for a crappy refurb they'd sent me, and I sent it back immediately as the port came to me loose. The second one came loose, I believe, just by charging it, syncing it, etc (I went through a phase where I changed OS's every 5 minutes...I am an addict, I admit it). The third one came loose (I suspect) when I was charging it in my car and had to hit the brakes hard, and it went flying to the floorboards. This one I have no clue. It worked fine until 2 days ago. I went to charge it last night and noticed it being VERY tempermental, and a bit loose. I would like to fix it before it gets to the point of being complete crap.
All the rumors say that Tmo USA will be releasing the Kaiser soon, and I really want that phone, and would rather not pay the $100 or so bucks swapping out my MDA through insurance, just to have the Kaiser released 4 days later (Murphy's Law affects me a lot).
So.... Help please!!!!
Ok...so I got my hands on the MDA repair manual...and after some head-scratching my husband and I managed to take the wizard apart. Luckily, only the 4 tiny bracket holding the usb port in broke loose, so it was a matter of soldering them back on. My MDA is back to working again. Yay (and whew!)
akashastrega said:
Ok...so I got my hands on the MDA repair manual...and after some head-scratching my husband and I managed to take the wizard apart. Luckily, only the 4 tiny bracket holding the usb port in broke loose, so it was a matter of soldering them back on. My MDA is back to working again. Yay (and whew!)
Click to expand...
Click to collapse
I had this same problem... Slamming on the brakes when your MDA is connected to the car charger is never a good idea...
Trust me when I say this though. I wrecked my Integra GSR swerving to avoid hitting a deer. The impact of the car hitting the curb severed all the contacts on the USB port and now the USB port has fallen out of the phone completely...
So all I need to do is solder those 4 connectors and make sure the port is positioned correctly over those 5 tiny connectors and I should be fine? My soldering skills are somewhat sub-par so I don't want to risk it unless I know exactly what needs to be done before I do it. I'm sure you can understand that though.
PS>> I too am only hoping that I can keep my MDA working long enough to get a Kaiser. I have been saving but am not quite there yet...
dharvey4651 said:
I had this same problem... Slamming on the brakes when your MDA is connected to the car charger is never a good idea...
Trust me when I say this though. I wrecked my Integra GSR swerving to avoid hitting a deer. The impact of the car hitting the curb severed all the contacts on the USB port and now the USB port has fallen out of the phone completely...
So all I need to do is solder those 4 connectors and make sure the port is positioned correctly over those 5 tiny connectors and I should be fine? My soldering skills are somewhat sub-par so I don't want to risk it unless I know exactly what needs to be done before I do it. I'm sure you can understand that though.
PS>> I too am only hoping that I can keep my MDA working long enough to get a Kaiser. I have been saving but am not quite there yet...
Click to expand...
Click to collapse
Well none of my connectors broke...luckily...so on that matter I'm not sure...however, I had my hubby dismantle my MDA (which I won't lie, was a real b*tch...you think you're breaking it) just to when the port was exposed...he then readjusted the 4 connectors then using silver solder and a gun, made 4 pinpoint attachments. Be very careful...he let the gun get too close and slightly melted the plastic down by the battery release tab...no real damage, but if you aren't careful...
Hopefully someone can better answer you about the procedure...as I said, mine had only come loose and didn't actually break yet.
Good luck on the Kaiser...I'm saving too!!!
akashastrega said:
Well none of my connectors broke...luckily...so on that matter I'm not sure...however, I had my hubby dismantle my MDA (which I won't lie, was a real b*tch...you think you're breaking it) just to when the port was exposed...he then readjusted the 4 connectors then using silver solder and a gun, made 4 pinpoint attachments. Be very careful...he let the gun get too close and slightly melted the plastic down by the battery release tab...no real damage, but if you aren't careful...
Hopefully someone can better answer you about the procedure...as I said, mine had only come loose and didn't actually break yet.
Good luck on the Kaiser...I'm saving too!!!
Click to expand...
Click to collapse
Thanks. I'm going to take the chance and attempt soldering it back in place and just leave the 5 pin connectors touching where they're supposed to be soldered to. It's already broken and won't even hold a charge right now so really I have nothing to lose. Worst comes to worst, it won't work after I'm done but then again, it doesn't work now.
Wish me luck!!
MDA - HTC Wizard - 8125 Broken USB Port Fix Guide or Repair Manual needed
akashastrega said:
Ok...so I got my hands on the MDA repair manual...and after some head-scratching my husband and I managed to take the wizard apart. Luckily, only the 4 tiny bracket holding the usb port in broke loose, so it was a matter of soldering them back on. My MDA is back to working again. Yay (and whew!)
Click to expand...
Click to collapse
Seems this is a definite design / manufacturing flaw considering ALL of these USB ports seem to break within an unrealistic time frame.
Help please, still looking for MDA /Wizard repair manual. Know where I can find it?? 10Q
Here you are:
http://forum.xda-developers.com/showthread.php?t=259242&page=6#post1083526
Some guys charge this file for US$7.99....- -"
let me know how your repair attempt goes. I'm in the exact same situation. Mine isn't completely broken, but it takes LOTS of fiddling to get it to charge, and I can't get an activesync connection at all. Because it still charges, though, I'm guessing that its not completely broken off which will make my repair job slightly easier....
My USB Repair experience
http://forum.xda-developers.com/showthread.php?p=2012482#post2012482
My vibrant gave up the ghost 2 days ago. Turned itself off and now it won't fully boot without turning itself off unless I leave it undisturbed on a table.
Something on/under the ringer/speaker is loose or corroded, because tapping on that part of the phone makes it cut itself off.
Been using a Galaxy Tab as my phone for the past day and a half. Galaxy Nexus should arrive at home this afternoon.
Goodbye vibrant and Bionix. I would have liked to keep you as a media player, but I guess it is not to ever be. You worked well... except for your wonky GPS and tendency to 'forget' custom ring tones for contacts.... and your shrinking battery life (I have 4 spare batteries).... and taking 2 minutes to read the SD cards during boot up.... but you sure had a nice screen.
You could still use it as a media player. Odin it back to stock then flash a rom. There's one that's design just for that.
You said when you tap it on the side it cuts its self, do you mean it shuts down?
Sent from my SGH-T959 using Tapatalk 2
When I tap it on the back surface of the phone, close to the top (basically where the ringer/speaker-phone is) then it shuts itself off (power goes off)
Other things can cause it to shut off, but that seems to be the problem area.
you may can fix it
well, if you have a soldering iron and a oven proceed, if not but you want to fix it go and buy one.
**Do it only as last resource and if you dont have an soldering station.**
take out the board of you vibrant, solder a small piece of any wire you have on an insignificant par of the board (like the gold border around it) put the board in the oven nearly at 200ºC and wait a bit of time till the solder you have done got liquid an the wire goes down.Turn off the oven and let the door open in order to cool ,wait till it got fresh enough to test.
Be happy!
Obs.:the board will get damage if you let it got more hot than necessary.
Good luck!
Are you suggesting that I connect the board to an electrical ground?
Did you have insurance on the phone? If so I'd get it replaced and then sell the new phone.
Sent from my SGH-T959 using xda premium
No. Phone insurance is mostly a rip off unless you lose it in the first ~4 months of ownership.
It was worth a shot.
I have it on mine, but I wonder what they would replace it with on a claim if I was to break it since they stopped selling the vibrant quite a while ago.
Sent from my SGH-T959 using xda premium
Tarzanman said:
Are you suggesting that I connect the board to an electrical ground?
Click to expand...
Click to collapse
no, only to you resolder you board without the full equipment needed.
Sorry for my bad english, it's not my natural language.
***BUT, if you still on warranty,wipe all,odin a stock rom and let they replace your phone.
Could you sell it for parts? I'm in need of a few vibrant parts at the moment.
acseazzu said:
Could you sell it for parts? I'm in need of a few vibrant parts at the moment.
Click to expand...
Click to collapse
Which parts are you interested in?
Im interested in phone mine has
Sent from my SGH-T959 using XDA
hi !!!! im after some info on my desire z. my brother brought the phone brand new and 5 days on having the phone ,got drunk and accidently dropped the phone down the toilet !!! ( idiot ) the screen was damaged and needed to be replaced ,the phone would switch on but no display ! so i brought the phone of him for £20 ( bargain ) i then found a place in china that sell the screen for £30. i waited 2 months for the screen to come and in contact with the person they told me that it had been posted but must have got lost in the post. he gave me my money back as i decided to get 1 from the u.k and 5 days later he refunded my money. 4 days after my refund the screen came = ). so i searched and found a video on how to take the phone apart and decide to fit the screen myself with no problems. now i have the problem that when i make phone calls ,people cant hear me =( i have tried my voice search and voice recorder and my phone does not pick up my voice up so i know the mouth speaker does not work !!!! my question is ,what part would i need to replace for my mouth speaker to work ??? any advice please ?? thanx for your time
Hi
I think you have problems with your microphone coal.(correct me if i am wrong)It might be damaged due water.Try to replace it.
Best regards
kelleci said:
Hi
I think you have problems with your microphone coal.(correct me if i am wrong)It might be damaged due water.Try to replace it.
Best regards
Click to expand...
Click to collapse
thanx for your reply ,any ideas where i can get 1 from and how much it will cost ???
o,k ive searched around and can not for the life of me find this part !!! can any body help me please ?????
its part of the main flex cable, easily forund on ebay or amazon for 35~40usd. if you find one that comes with the whole chasis it will make replacement easier as you won't have to glue/unglue anything but its harder to find and most certainly will be used
good luck!
Sent from my HTC Vision using xda premium
I have to check, but I don't think you can replace the microphone on it's own. It's part of something, I believe on the screen portion of the phone. I'll have to take a look and see where it's located. I'm not sure, but I think it's part of the flex cable.
demkantor beat me to it.
Maybe everyone you speak to is deaf
Velcro. What a rip off!
demkantor said:
its part of the main flex cable, easily forund on ebay or amazon for 35~40usd. if you find one that comes with the whole chasis it will make replacement easier as you won't have to glue/unglue anything but its harder to find and most certainly will be used
good luck!
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
thank you so so much =) my next question is ,which flex is it ? the navi key and flex or the slider flex ??? sorry if thats a dumb question ?!? lol
there is one big main flex cable for your phone, and then small ones connecting the sdcard slot, keypad, etc
you need the big main one, if you take your phone apart and folow the main flex down to where the mic is (look @ the whole on the bottom of phone directly down from back arrrow) you will see the mic sitting in a piece of rubber. it may be possible to solder a new one into the flex but I feel it would be extreamly hard. just buy the whole big flex and it will come attached to it
Sent from my HTC Vision using xda premium
demkantor said:
there is one big main flex cable for your phone, and then small ones connecting the sdcard slot, keypad, etc
you need the big main one, if you take your phone apart and folow the main flex down to where the mic is (look @ the whole on the bottom of phone directly down from back arrrow) you will see the mic sitting in a piece of rubber. it may be possible to solder a new one into the flex but I feel it would be extreamly hard. just buy the whole big flex and it will come attached to it
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
thank sir ,you are my saviour ! ive found 1 ,£20. thank you so much =)
My screen of my HD2 had a pixel fault, it had a purple circle on the middle of the screen, so I decided to dissasemble it.
Well, the phone inside is very confusing, I looked at the screen part and I couldn't see anything.
I re assembled it, and it won't power on now.
Is a phone so sensible when I touch it inside its gonna die?
I successfuly changed the digitizer of my Wildfire S so I thought the HD2 wouldn't be a problem.
Is a phone so sensible when I touch it inside is the chance to kill the phone 90% or what?
I need quick answers.
Thanks!
Sent from my home using my fingers
Hd2 is delicate & not easy to dismantle without experience & extreme care.
Most first time strip-downs by people with little or no experience result in problems like yours.
Check out the threads on dismantling guides & also videos can be found on youtube.
Check all connectors to mainboard are inserted correctly & also check basics such as battery pins are straight & not misaligned during dismantling/rebuild.
Initial screen issue sounds like lcd/digitizer needs replacing.
The very tiny camera holder on the Main Board broke, its Not a important thing its Theres thereby the camera stays at place.
While taking off the screen i accidenty broke the screen BUT ITS ALMOST INVISIBLE.
I lost some screews and the chassis won't fit in the houses.
I was going to fast cause I'm 14 and my parents didn't allow me and I didnt want them to see it.
But problem is, i lost the cable adapter for the phone vibrator (LOL)
And i lost the board screews so I used the screews of the phone case.
Where can I get new screews?
Sent from my HTC Wildfire S A510e using xda app-developers app