Hi everyone
up until today i was using a 3970 with tomtom2 and a b/tooth emtac receiver.Bought a xda2 today and firstly cant get the emtac to bond with thexda think im using the correct passkey of 0183 but the xda keeps saying invalid bluetooth pin :?:
any ideas as im pulling my hair out here,also on a similar subject cant seem to get the xda to even recognise my b/tooth headset,a hbh 30 which was working fine with the ipaq.Hope i can get these issues sorted as the Xda looks great.
Regards
nige
Ohh..well... WELCOME to buggy XDA2 bluetooth!
Try to install the new Bluetooth Tools Patch,maybe fix the prob man!
Regards
nigelfish
I have a rebadged emtec receiver and can confirm that you need to install bluetooth tools (even with the latest ROM).
I have rebonded this thing many times due to ROM upgrades and hard resets, the other day it would not accept 0183. weird. A soft reset fixed this problem.
Thx for the swift reply guys,i will give it a go asap
watch this space
ah well thought it would be to easy,i downloaded the bluetooth tools and still not accepting the passkey of 0183 just saying invalid bluetooth pin.Any other ideas guys?
nige
this may be a stupid question but are you using the keyboard or transcriber to enter 0183?
The keyboard is the way to go here as you can't confirm if transciber is recognising correctly.
emtac problem sorted
Hi evreyone
got the emtac problem sorted thx,passkey turned out to be wrong should have been 2003.So tomtom seems to be ok now,but still cant get my hbh30 bonded,not even seeing it when im on discoverable,so again any ideas would be welcome,and once again thx for all your help with the emtac problem
nige
Update
Hbh 30 now bonded but having trouble/or could be me getting used to it ! /
i can acept calls into the headset ok but making a call from the xda i cannot use the headset just the xda to talk with.Anyone using the microsoft voice command?
Just would like to be able to have full hands free when in car.
Thx for any help offered.
Ok having major problems with this unit, I've finally bonded the device to the xda 2 and have installed the software and UK maps onto memory card, I can only select com 7 in the bluetooth profiles for the Navman and when I go into GPS settings in SmartST com 7 is the only one I cant use WTF !!!!!
Also after running SmartST when I next try to run it it runs so slow and eventually locks up I've tried all the patches to no avail I have 70 Mb of memory for running programs so that should be plenty. Anyone haave any Ideas????
Navman problem fixed!!!!!!
Well I managed to figure out what was causing the SmartST software to run rediculously slow on my XDA II.
I noticed that whenever I stopped all programs from running, the Active program would always end up as not responding so I decided to remove the O2 Active user interface and it cured the problem.
It works great totally impressed with it.
WOOHOO
Jarran said:
Ok having major problems with this unit, I've finally bonded the device to the xda 2 and have installed the software and UK maps onto memory card, I can only select com 7 in the bluetooth profiles for the Navman and when I go into GPS settings in SmartST com 7 is the only one I cant use WTF !!!!!
Also after running SmartST when I next try to run it it runs so slow and eventually locks up I've tried all the patches to no avail I have 70 Mb of memory for running programs so that should be plenty. Anyone haave any Ideas????
Click to expand...
Click to collapse
Sorry mate , do you have a smart ST professional ora higher version ?
I'm using the Smart ST professional updated , but I bond the gps with the XDA2 , but once Ilaunch the software , I cannot selectany port available in the gps software .
Do you have any idea ?
Thanks
Smartst
I have the Smartst version 2 which has been patched to the latest update.
Re: Smartst
Jarran said:
I have the Smartst version 2 which has been patched to the latest update.
Click to expand...
Click to collapse
So do I have to buy Smart STprofessional 2 to make it work ?
Thanks a lot
Janaro
Com 7 Port For Navman
I had a similar problem. I had to remove the exisiting bond with the Navman and then soft reset. Then, go into GPS settings and com7 should be available to select. Finally, rebond with Navman device and select com7 from the bluetooth tools options, and hey presto! It took some trial and error but it was worth it, Navman now working perfectly, am looking forward to an extended road test in northern France this weekend!
Re: Com 7 Port For Navman
kernow said:
I had a similar problem. I had to remove the exisiting bond with the Navman and then soft reset. Then, go into GPS settings and com7 should be available to select. Finally, rebond with Navman device and select com7 from the bluetooth tools options, and hey presto! It took some trial and error but it was worth it, Navman now working perfectly, am looking forward to an extended road test in northern France this weekend!
Click to expand...
Click to collapse
I have uninstalled the software and installed again , without bonding it yet .
When I launch the smart ST professional 1.91.0011 , there si no port available !!! do you know why ? Can you help me on this matter . Thanks
Janaro
hey hey hey... cool it guys..
I helped a customer set this up, and it worked like a charm..
You have to make sure that before you paired both the deviced, you have to checked the inbound port under settings->bluetooths settings...
then you should be able to selected it later in the program..
oh yes, just a gentle reminder, just install the EnableCharPin software from , else you cannot enter "NAVMAN" as a password.
Cheers
there is another solutions dou, but after I worked on it for another customer, I could not get it to work with his headset using bluetooth.
ChaoZ said:
hey hey hey... cool it guys..
I helped a customer set this up, and it worked like a charm..
You have to make sure that before you paired both the deviced, you have to checked the inbound port under settings->bluetooths settings...
then you should be able to selected it later in the program..
oh yes, just a gentle reminder, just install the EnableCharPin software from , else you cannot enter "NAVMAN" as a password.
Cheers
there is another solutions dou, but after I worked on it for another customer, I could not get it to work with his headset using bluetooth.
Click to expand...
Click to collapse
Thank you very much mate for your effort , but to be honest ...still doesn't work !! I have no port available in the Smart St Professional window !!! I have done all your path several times , no sign . I have also tried the other bluethooths tools , nothing . I launch the softare but no port available . I can pair the devices but then I cannot get the GPS signal to the software !!Any other idea ?
Janaro
Navman problems
Hi guys -
I'm also having problems with setting up my Navman 4410. I had it working on my XDA2 (after a struggle) when using ROM version 1.03, but I've now upgraded to ROM V1.60.50 which is the latestest relase from 02. Since then I'm having the same problems as Janaro - there is no com7 available in SmartST (v2.00.0029 SP1). The default bluetooth com port is COM4 but it does not appear to bond correctly.
I've tried the recommendation from Kernow but I still cannot get it to work
Has anybody got any ideas ?
Alan
Have you got "Recieve all incoming beams" unticked. Start\settings\connections\beam.
Hope this helps
Receive all incoming beams is ticked - should it be ?
I think the problem is more to do with the COM ports. BTHtools only allows you to set the com port to COM7 - but COM7 is not available within Navmans SmartST software.
Ah ha - untick "Receive all incoming beams" (in start\settings\connections\beam) and COM7 becomes available within SmartST - everybody with problems please note !!!
It now works OK - many thanks
Alan
crippsa said:
Ah ha - untick "Receive all incoming beams" (in start\settings\connections\beam) and COM7 becomes available within SmartST - everybody with problems please note !!!
It now works OK - many thanks
Alan
Click to expand...
Click to collapse
hello there , my incoming beams was already untick !!! still not working , what a mess !!!
Thank you
Janaro
Different Navman solution
After upgrading my Qtek 2020 to 1.66, SmartST would take forever to open whereas it had been reasonably quick before.
I was successful in making it work by not installing the bluetooth tools but only executing the EnableCharPin from my synched laptop.
This meant that I could pair my Navman 4410 after having checked both inbound COM4 and Outbound COM5 in Bluetooth settings. (The bluetooth tools would only provide COM7 whereas that port was not available in SmartST)
The double blinking only went away after SmartST was started.
After installing SmartST V2 the program starts fairly quickly
[/b]
Re: Different Navman solution
LarsN said:
After upgrading my Qtek 2020 to 1.66, SmartST would take forever to open whereas it had been reasonably quick before.
I was successful in making it work by not installing the bluetooth tools but only executing the EnableCharPin from my synched laptop.
This meant that I could pair my Navman 4410 after having checked both inbound COM4 and Outbound COM5 in Bluetooth settings. (The bluetooth tools would only provide COM7 whereas that port was not available in SmartST)
The double blinking only went away after SmartST was started.
After installing SmartST V2 the program starts fairly quickly
[/b]
Click to expand...
Click to collapse
Ok , so I have to install Samst ST V2 !!!
Thank you
Janaro
4400 and XDAII works OK
I am using the 1.60WWE 02 ROM (Recent upgrade), a Navman 4400 and Smart ST (not 2) software, and it works a charm. I agree that BTTools should not be used but you have to use enablechar.exe to key in the PIN. I had no problems with bonding. Make sure however you un-pair all other devices (headset etc) first to give the 4400 first choice of the COM ports. As has been stated, when paired, make sure you check Com 5 outbound under Start/Settings/BT Settings (this was the main feature of the 1.60 upgrade that appealed to me), then select the same port from the GPS status screen of Smart ST.
It is working for me. I look forward to seeing Smart ST2 with its 3d view, but it is not necessary.
I think you have other problems if ST 1 doesn't work.
On another note, the amount of time taken to start the software is related to how many maps it has to process. If you only check the maps you are using (under Setup/Maps in Smart ST) it will speed things up greatly.
After first getting my XDA2 to work with my Navman 4410 using SmartST V2 and BTHTools and setting the com port to 7, I have now managed to get it working by using the standard set-up as recommended by Camstech.
By checking both the inbound and outbound boxes in start/settings/system/BlueTooth_settings and by setting COM5 within SmartST it now works fine.
Alan
Navman 4400 / 4410 and Bluetooth Headset
Very helpful dialogue here. Many thanks to all. Based on this, I am planning to purchase either a Navmean 4400 or 4410, but wondered if any of you have been able to set up the GPS and a Bluetooth headset at the same time. I don't really need to have the GPS voice prompts come through the headset (probably too much to ask at this point), but would like to be able to answer/end calls via the headset, while the GPS is active. Do any of you have BT headsets working with the 4400 / 4410 installed?
I have Navman 4400 and bluetooth headset working at the same time not a problem. I bought Namvan 4400 from Dicksmith Australia as I got it $100 off the price as it has the old 2D software mapping, but Navman Australia send the mapping software upgrades to you for free, something to consider if you can find 4400 still as the hardware is the same with 4400 and 4100 navmans.
Hi,
Has anyone managed to get this to work on the XDA2i or am I climbing up the wrong tree? :roll:
anyone?? :roll: :roll: :roll: :roll:
I installed it with a fortuna bluetooth gps and it works!
Anyway i had some problems with Plantronics headphone, i
made some tests and i suspected that Tomtom driver interact
with Plantronics, so i unistalled it! :roll:
Also i think that 2020i doesn't support 2 wire serial comunication, so
if you have a serial gps should not works! :?
Ciao
There should be no problems - I've been using it since the XDA2i was released, you need to ensure that you apply all of the updates etc. Let me know if you have any specific problems.
I can vouch that it works... Although you may need to reinstall bt-stack as tomtom overwrites it with old dll's...
Thanks everyone. I will try it.
Hi All.
I have NOKIA LD-3W GPS, Qtek 9100 with ROM 2.17.7.2 CSY and installed WayFinder. I do pair Qtek and NOKIA LD-3W GPS, create outgouing COM port, disable secure connection. Run WayFinder a cannot show created COM port in WayFinder GPS settings.
WayFinder not found GPS receiver....
I read http://forum.xda-developers.com/viewtopic.php?t=53840&highlight=ld3w but not help me.
Help me anybody?
Thanks for any ideas. :roll:
Solved....
Now this GPS receiver with WM5 me working :lol:
Hello everybody,
I have a 9100 with ROM ver. 2.17.7.2 WWE.
I wandering if anyone was able to have the Navman 4410 working.
I'm having problems pairing my 9100 with the 4410 gps unit.
when I doa scan, it find the NAVMAN GPS ONE device but that's it.
There's a "?" icon to the left of the device and iGuidance cannot find the GPS device.
Thanks in advance for your help!
Mike
Did you create an incoming COM port for it?
mlehtola said:
Did you create an incoming COM port for it?
Click to expand...
Click to collapse
yes,
in the devices tab = :?: NAVMAN GPS ONE
in the COM ports = NAVMAN GPS ONE (COM6) & Incoming Port (COM7)
Thanks for the help!
I have this GPS device working fine on my Wizard.
In Bluetooth settings, on the devices tab, i have "? NAVMAN GPS ONE". If I select this I then have Serial Port seleceted.
On the COM ports tab I have only NAVMAN GPS ONE (COM6). This has worked fine for me for a number of months.
Hope this helps...
s.gibbs said:
I have this GPS device working fine on my Wizard.
In Bluetooth settings, on the devices tab, i have "? NAVMAN GPS ONE". If I select this I then have Serial Port seleceted.
On the COM ports tab I have only NAVMAN GPS ONE (COM6). This has worked fine for me for a number of months.
Hope this helps...
Click to expand...
Click to collapse
Thanks dude.. that was really helpful.. set it like u said and it worked!!!!!!
i won't get lost now
thanks again!!