Database Users

No icons on the right side of the top bar?

Dunno what's going on, but on my MDA I can't see the volume icon or 1/2 of the Tmobile Signal icon on the top of the screen. I don't have anything running that should interfere with it. Any ideas? Anyone seen this on their system?

Kick...
I have exactly the same problem, but also the time isn't visible anymore.
I didn't found a solutions yet. I only can remember that I had MagicButton installed, but I removed it yesterday.
Any help wil be very appreciated!
Best regards,
Peter

Sorry if this is no help, I am a noob but may offer the following.
I hadn't noticed the problem you have described but after installing 'registry wizard' I noticed that my top bar had a display 'problem'
It was as you described with a blank space and half an icon missing.
I gave a soft reset and it helped. I then went back into 'registry wizard' and found the option corresponding to the top bar
Turning the function off has restored the bar back to its normality.
I am not sure if it was this software as I hadn't taken any real notice but it's just a thought.

Jerry-S said:
Sorry if this is no help, I am a noob but may offer the following.
I hadn't noticed the problem you have described but after installing 'registry wizard' I noticed that my top bar had a display 'problem'
It was as you described with a blank space and half an icon missing.
I gave a soft reset and it helped. I then went back into 'registry wizard' and found the option corresponding to the top bar
Turning the function off has restored the bar back to its normality.
I am not sure if it was this software as I hadn't taken any real notice but it's just a thought.
Click to expand...
Click to collapse
Hmm.. weird, I recently installed Registery Wizard too and now I come to thing of it, I'll reinstall it! Many thanks for your quick reply!

Sorry if this is no help, I am a noob but may offer the following.
I hadn't noticed the problem you have described but after installing 'registry wizard' I noticed that my top bar had a display 'problem'
It was as you described with a blank space and half an icon missing.
I gave a soft reset and it helped. I then went back into 'registry wizard' and found the option corresponding to the top bar
Turning the function off has restored the bar back to its normality.
I am not sure if it was this software as I hadn't taken any real notice but it's just a thought.

Sorry if this is no help, I am a noob but may offer the following.
I hadn't noticed the problem you have described but after installing 'registry wizard' I noticed that my top bar had a display 'problem'
It was as you described with a blank space and half an icon missing.
I gave a soft reset and it helped. I then went back into 'registry wizard' and found the option corresponding to the top bar
Turning the function off has restored the bar back to its normality.
I am not sure if it was this software as I hadn't taken any real notice but it's just a thought.

ptr said:
Hmm.. weird, I recently installed Registery Wizard too and now I come to thing of it, I'll reinstall it! Many thanks for your quick reply!
Click to expand...
Click to collapse
No problem. The actual description is on the Tweaks 2 menu and is Taskbar Date/Time
I unchecked the box and it's now ok as far as I can tell. Like I say, I have only just got the pda and didn't really take that much notice of how it was before I installed the software.
MODERATORS: Sorry but I have no idea why my post has appeared twice more!! I know I only submitted once. If it's only me that can see it as my computer is being naughty, I apologise.

ptr said:
Hmm.. weird, I recently installed Registery Wizard too and now I come to thing of it, I'll reinstall it! Many thanks for your quick reply!
Click to expand...
Click to collapse
No problem. The actual description is on the Tweaks 2 menu and is Taskbar Date/Time
I unchecked the box and it's now ok as far as I can tell. Like I say, I have only just got the pda and didn't really take that much notice of how it was before I installed the software.
MODERATORS: Sorry but I have no idea why my post has appeared twice more!! I know I only submitted once. If it's only me that can see it as my computer is being naughty, I apologise.

The same thing happened to me yesterday - the clock and half of the sygnal strength indicator disappeared. Unfortunately, I could not trace the reason as I was installing various applications then. I know for sure that I had registry wizard installed at that stage.

Yup, it's Reg Wizard. I had to recheck the 'clock on taskbar' option, and now all is good. Glad to hear I wasn't goin' crazy!

compressed volume bars

Hi,
Please take a look at the attached screenshots. The volume bars for the system and phone sound seem to be compressed. I had this problem with the original ROM and also the upgraded AKU3.2 ROM which leads me to believe this is an application that is causing this to happen to the volume bars.
It happens in both portrait and landscape modes and a reset does not fix it.
Please compare these screenshots to your system to see if you have same problem then we can maybe do some app comparisons to see what is causing it..... unless there is another reason for it?
Thanks.

I seen what you mean. It's perfectly functional, except that the icons are slightly overwritten.
I do not have your problem, unfortunately, but it could maybe be because of the skinning program you use (to display the running programs). They tend to fiddle with the system dialogs.
The only other thing I can think of it maybe something that hacked/changed the system font/dpi settings

No problem on my Wizard. Have you changed your fonts? On my screen, the radio button for the on, vibrate, and vibrate, are not touching each other. There is a gap in between.

I am using magic button for the closing of programs but i have only started to use this recently. I havent changed any font sizes or any other display settings either. (I have tested changing them though but this didnt make any difference)

By itself, Magic Button shouldn't be the issue since I've been using Magic Button for almost a year and haven't seen the problem you're having.

Yes I know - with or without magicbutton i still get the same problem.

changing system font in the registry will cause the buttons and button text to be smaller and buttons look compressed.

Today items not refreshing. Anyone else??

Hi, Anyone else have the problem of the today items not refreshing on the start screen?
I mean like htc home, I change options or even untick it in today , and it still shows on the start screen until i soft reset.
Very strange.
Cheers.

Hheeelpppp !!!

Here too
I am having that problem too. Still trying to figure out what caused it. I had it before and the only way to fix it was to hard reset.
This time I paid attention and it started after i installed the newest Resco Explorer. I asked them for assistance and all I got was that since the problem wasn't inside Resco's software they can't help me. To be fair I don't know if their software caused it, all I know is that is that it started after I installed their software.
I have found that another way to get the Today screen to refresh is to change the Today screen's theme..

Hi, at least its not just me then. It's like i have HTC home, when i untick it in today screen, it still stays on my start screen. the only thing to do then is soft reset and it is off then. But its a pain when i am changing appearances etc as i have to untick,reset,change,tick,reset etc.

please help!!

Startup: empty notification

Whenever I turn my phone on it shows an empty notification "bubble". Also in the top bar next to the G/3G icon is an extra icon, the one that shows up when you change keyboard input to numbers. It just stays there... Also the lower-left "softkey" turns to Notification instead of the usual Agenda.
I can only get rid of it by opening up a new sms/mms/email, because then the icon for t9/abc/numbers needs to be used, so it sort of refreshes the icon and it goes away when I exit the sms/mms/email.
Now I was just wondering if there's any way to fix this? It's bugging me, although not to a degree at which it would be frustrating, but still... I'd rather not have to go through the above mentioned steps everytime I turn my phone on.
I think it's too minor of a problem for flashing my phone. So, any suggestions on what to do? Thanks!

hi - tap start/ settings in personal tab tap "lock" untick box listed "prompt if device unused for" this sovled for me

Thanks! That worked. I'll leave it like this for the moment, but if there's a way without turning off the lock please let me know.

KrewCial said:
Thanks! That worked. I'll leave it like this for the moment, but if there's a way without turning off the lock please let me know.
Click to expand...
Click to collapse
it's a known bug.
i haven't seen it since i flashed the niki project ROM.

Aww, ok.
Guess there isn't much else to do then. I'll wait for an HTC update.
(Anyone know when WM 6.1 will be here for the touch dual? )

KrewCial said:
Aww, ok.
Guess there isn't much else to do then. I'll wait for an HTC update.
(Anyone know when WM 6.1 will be here for the touch dual? )
Click to expand...
Click to collapse
Then Niki Project ROM runs WM6.1. Try it. I have it on my Niki and it's fantastic!

TF3D causing Xperia to Hang forever

Hi guys,
as u know know the TF3D by default takes up the 1st panel.
and when i try to use the other panels..i can no longer press the button X... because whenever i do that..the entire Xperia screen goes blank and hangs up. then even the power button doesnt work and i have to remove and reinsert the battery.
what to do?
this TF3D causing major issues.. is it bugged?

Doing a soft reset is way easier...open the battery cover, pull out the pen und put it in the small hole...
Are you using TF3D as panel or on the default today panel? If not already tried, use the TF3D-Pnaleinstaller here ion the forum...

When i try to access the panels, my X1 hangs most of the time as well, using it as the today screen. Is there any fix?

ya i use it as on Today screen.
is there a fix around this?
i disabled it now anywya.
btw does Soft Reset also delete all the data?

"btw does Soft Reset also delete all the data?"
no thats the diff between soft and hard reset

which version r u guys using? I am using beta2 and I dont have any problem switching panels... only flaw I have in the tf3d is I cant add some people to the favorite list for some reason... otherwise everything is working as it should be

Same here
I wanna know if anyone found a fix for this? or at least let us know if you have this issue. This is what I have narrowed it out to.
I'm using <Touch-IT Xperience v2.1> ROM which has TF3D installed by default
The Panel interface(The screen which opens up when i click panel button) works perfect when i disable TF3D in today
Now when I activate it, am able to open the panel interface and choose any other panel.
After this, if i click on the panel button, the x1 just freezes and all i can do is soft reset
Note:- I have no other application running.
If this continues I have to choose either panels or TF3D. I love it when i can use TF3D for daily use and shift to Facebook or media panel when i need them.
I just wanna know of this indeed a bug or am i missing something big

currently 2 versions available
hi,
i too was suffering fromt he same issues and took a while to realize that the tf3d was causing it.
afaik, there are 2 different versions of tf3d (i mean by 2 diff. people) for xperia.
i beleive most of us are using the one titled 'Full manila hd cabs' (or something similar - extremely sorry for not recalling the name of the developer who's made rhe effort to provide it) - and the one experiencing the issue.
there is another version linkd on the xda wiki, will try it now - and update with names of both developers as well as results

again
actually installing TF3D as a panel solved this issue
but since we have the new manila... the panel doesnt work
so we are back to square one... by default the TF3D sit on the today's screen and after that pressing the panel button freezes the phone
And if you choose the new panel with TF3d... it says loading forever
SOmebody please help

I'm an idiot - I can't figure out where the "small hole" for the soft reset is located.
Can someone show me a picture?

I'm an idiot - I can't figure out where the "small hole" for the soft reset is located.
Can someone show me a picture?
Click to expand...
Click to collapse
hehe... I spent ages trying to figure this one out too...
here's an image I got on Google search..
to access the reset button .. you need to take off the battery cover, pull out your stylus (since that is obstructing the button) and then using the stylus 'poke' into the hole besides the battery.
I find this location - and the need to take off the battery cover - everytime you need to reset very VERY painful