No icons on the right side of the top bar? - 8125, K-JAM, P4300, MDA Vario General

Dunno what's going on, but on my MDA I can't see the volume icon or 1/2 of the Tmobile Signal icon on the top of the screen. I don't have anything running that should interfere with it. Any ideas? Anyone seen this on their system?

Kick...
I have exactly the same problem, but also the time isn't visible anymore.
I didn't found a solutions yet. I only can remember that I had MagicButton installed, but I removed it yesterday.
Any help wil be very appreciated!
Best regards,
Peter

Sorry if this is no help, I am a noob but may offer the following.
I hadn't noticed the problem you have described but after installing 'registry wizard' I noticed that my top bar had a display 'problem'
It was as you described with a blank space and half an icon missing.
I gave a soft reset and it helped. I then went back into 'registry wizard' and found the option corresponding to the top bar
Turning the function off has restored the bar back to its normality.
I am not sure if it was this software as I hadn't taken any real notice but it's just a thought.

Jerry-S said:
Sorry if this is no help, I am a noob but may offer the following.
I hadn't noticed the problem you have described but after installing 'registry wizard' I noticed that my top bar had a display 'problem'
It was as you described with a blank space and half an icon missing.
I gave a soft reset and it helped. I then went back into 'registry wizard' and found the option corresponding to the top bar
Turning the function off has restored the bar back to its normality.
I am not sure if it was this software as I hadn't taken any real notice but it's just a thought.
Click to expand...
Click to collapse
Hmm.. weird, I recently installed Registery Wizard too and now I come to thing of it, I'll reinstall it! Many thanks for your quick reply!

Sorry if this is no help, I am a noob but may offer the following.
I hadn't noticed the problem you have described but after installing 'registry wizard' I noticed that my top bar had a display 'problem'
It was as you described with a blank space and half an icon missing.
I gave a soft reset and it helped. I then went back into 'registry wizard' and found the option corresponding to the top bar
Turning the function off has restored the bar back to its normality.
I am not sure if it was this software as I hadn't taken any real notice but it's just a thought.

Sorry if this is no help, I am a noob but may offer the following.
I hadn't noticed the problem you have described but after installing 'registry wizard' I noticed that my top bar had a display 'problem'
It was as you described with a blank space and half an icon missing.
I gave a soft reset and it helped. I then went back into 'registry wizard' and found the option corresponding to the top bar
Turning the function off has restored the bar back to its normality.
I am not sure if it was this software as I hadn't taken any real notice but it's just a thought.

ptr said:
Hmm.. weird, I recently installed Registery Wizard too and now I come to thing of it, I'll reinstall it! Many thanks for your quick reply!
Click to expand...
Click to collapse
No problem. The actual description is on the Tweaks 2 menu and is Taskbar Date/Time
I unchecked the box and it's now ok as far as I can tell. Like I say, I have only just got the pda and didn't really take that much notice of how it was before I installed the software.
MODERATORS: Sorry but I have no idea why my post has appeared twice more!! I know I only submitted once. If it's only me that can see it as my computer is being naughty, I apologise.

ptr said:
Hmm.. weird, I recently installed Registery Wizard too and now I come to thing of it, I'll reinstall it! Many thanks for your quick reply!
Click to expand...
Click to collapse
No problem. The actual description is on the Tweaks 2 menu and is Taskbar Date/Time
I unchecked the box and it's now ok as far as I can tell. Like I say, I have only just got the pda and didn't really take that much notice of how it was before I installed the software.
MODERATORS: Sorry but I have no idea why my post has appeared twice more!! I know I only submitted once. If it's only me that can see it as my computer is being naughty, I apologise.

The same thing happened to me yesterday - the clock and half of the sygnal strength indicator disappeared. Unfortunately, I could not trace the reason as I was installing various applications then. I know for sure that I had registry wizard installed at that stage.

Yup, it's Reg Wizard. I had to recheck the 'clock on taskbar' option, and now all is good. Glad to hear I wasn't goin' crazy!

Related

Wrong icon

Does anybody face this problem with the JAM.
When I press the Permenant Save or the Device Information and some othet icons on the System Settings, I always get the backlight screen.
Any solution!... Thanks
Nope... all my icons are running the correct app.
(I think it's time for you to do a hard reset...)
Yeah, I've got the same problem :-(
It's somewhat intermittent...

Clock missing from title bar...help anyone?

Hey I got my XDA Exec this morning which I'm really please about, been using it for a couple of hours but for some reason the clock has disappeared from the title bar in the today screen and I can't get it back!
Does anyone know what might have happened, about the only thing I've got installed is Pocket Plus 3.
Infact i've noticed that the volume icon is gone too, but if i click where it should be the pop-up appears for me to change the volume levels.
It's like there is something covering these two icons and it's driving me mad, having the time visible there is about one of the most useful things :twisted:
This is a common problem
This happened to me too. It was caused by the O2 software. If you do a search on this site using the words "clock missing" there have been many posts on this subject and the solutions of how to remove the O2 software are posted too.
The O2 interface also seems to slow up the machine and cause a lot of freezing requiring a soft reset. My machine has been tons better since removing it.
If you decide that you would rather have the clock than the O2 software (and most people do) and decide to remove it, remember first of all to save your phone and GPRS setting to your filestore! This can save you a lot of time. If you like the 02 today screen theme then you could save this too.
Also I recommend that you make a backup first so that you can go back to how you are now if you need to.
Good Luck
Open the clock and you should find an extra tab at the bottom called - "More" select that and a new option appears Display the clock on the title bar in all programs.
Neither of those options worked, in the end I hard resetted the device and set it up in corporate mode I found using a PIN I got by just searching google! No more O2 Active anywhere, and I've got my clock back! I'd only had the device a few hours so luckily it didn't take too long to set everything back up how it was before hand The only thing I had to do was manually set up the GPRS connection again but that was simple enough since I already had all the settings saved

Start Menu Bug!!

I have noticed that when I have the Start Menu full of shortcuts and while on Portrait mode. After clicking on the Start and back again, some part resides on the task bar!!
Is this a bug or has anyone else noticed it??
I have noticed the same, also the soft keyboard icon on the bottom also gets screwed up.
richard
Start Menu Bug, is not a bug!!
ricmoo2004 said:
I have noticed the same, also the soft keyboard icon on the bottom also gets screwed up.
richard
Click to expand...
Click to collapse
As I have posted earlier about the above. I have discovered that tweaking the GLYPHCACHE entry from its default to some other rate such as "16384" as I thought it speeds the menu display and others.
On contrary, I found it does slow the menu as it creates the bug mentioned! Unlike the WM2003 SE!!
So for those who might have changed the entry, better keep it intact! :wink:

Please Help, Screen has moved upwards

At the home menu, the bottom bar and start bar are still in place however the rest has risen slightly. I can see my start menu wall paper at the bottom and my carrier name is now touching the bottom part of the start bar.
Any help, thanks in advance.
im sure ive seen a post like this on here somewhere, from what i can remember it was some app that caused it, have you installed anything recently?
http://forum.xda-developers.com/showthread.php?t=615794&highlight=screen+alignment
doesnt appear to be any answers though
Thanks very much, it was showcase. I just had to uninstall and do a soft reset. Thanks very much
glad you got it sorted

Plz help with my htc hd2 not working right after I installed something (got it fixed)

I just downloaded diniks taskbar and it really messed up my phone, first there's no icons at the top just the time and start. But when I press start nothing happens my phone is freezing bad I can't even go to the file explorer, I removed the taskbar through pc. Please help me my phone isn't working right at all.
Ok my phone isn't freezing up anymore and I have removed the program through my pc, finally went to file explorer and it's not showing up on there so what I want to know is why don't I have my icons back at the top, why can't I have my phone back like it was before I installed the taskbar 1.5. I still can't go to the start screen when I press it and when I get a call or text the icons show, the icons that show are the ones that I wanted in the begining(dinik anastasia taskbar) why are they showing if I removed it?
I encountered this before and I tried real hard trying to find out what caused it. After you installed the application, did you reboot your phone? It could be other programs having compatibility issues with it. I just ended up hard resetting my phone. The lesson I learned is to make notes after each installation and do a tideous test if I can of the functionality of the phone just to make sure everything is working properly before I install another app again.
Hopefully someone else has a better solution.
I just got it fixed someone from another site helped me out, I had to install one more thing to make it work right. I feel better now lol...
lalabrowneyes said:
I just got it fixed someone from another site helped me out, I had to install one more thing to make it work right. I feel better now lol...
Click to expand...
Click to collapse
What exactly did it take? It would help others dealing with it if you posted what you found.
I know what you did
You forgot to insall he skcert.cam. I know this because I just did this last night. I figured out that my bottom home menue still worked though. I scrolled all the way to settings and removed the task bar.
I thought that once you installed it once you wouldnt have to install it again when you wanted to change your task bar. I was wrong. Each time you uninstall a task bar and want to install another one you must run the cert file.
miller710 said:
You forgot to insall he skcert.cam. I know this because I just did this last night. I figured out that my bottom home menue still worked though. I scrolled all the way to settings and removed the task bar.
I thought that once you installed it once you wouldnt have to install it again when you wanted to change your task bar. I was wrong. Each time you uninstall a task bar and want to install another one you must run the cert file.
Click to expand...
Click to collapse
That's what I forgot to do install skcert.cam, but what was freaking me out is why my phone was freezing up really bad.
miller710 said:
You forgot to insall he skcert.cam. I know this because I just did this last night. I figured out that my bottom home menue still worked though. I scrolled all the way to settings and removed the task bar.
I thought that once you installed it once you wouldnt have to install it again when you wanted to change your task bar. I was wrong. Each time you uninstall a task bar and want to install another one you must run the cert file.
Click to expand...
Click to collapse
I too had to learn this the hard way. I did not need a hard reset just moved the slider to remove programs and restarted and it was fine. I had to use the updated skcert cab though the first one did not work at all. But now I am styling with the dinink taskbar
toreone said:
I too had to learn this the hard way. I did not need a hard reset just moved the slider to remove programs and restarted and it was fine. I had to use the updated skcert cab though the first one did not work at all. But now I am styling with the dinink taskbar
Click to expand...
Click to collapse
I don't mind learning lessons the hard way. As long as they don't brick my phone. LOL. That is what is stopping me from flashing a rom. I am scared of messing it up. one little mistake and its back to my old beat up blackberry LOL>

Categories

Resources