I used to be able to connect to activesync via bt. But after a recent hard reset, when I tap on bt in ActiveSync in my PPC, it just does nothing. No response, no error message, just nothing happens.
However BT headset works fine.
Can anyone help? Thanks.
I got the same problem with ActiveSync via Bluetooth after I upgrade my Xda II from ROM version 1.52 to 2.06. Transfering files via BT works fine, but not activesync.
I keep searching the posting for solving the problem
Abah
Maybe a stupid question, but did you re-create the ActiveSync bluetooth bond on your XDA2 before trying to use AS? I made this mistake after a ROM update a while ago.
After the ROM upgrade, don't just create a new bond to the PC through the Bluetooth page. You must go to Start -> Settings -> System -> Bluetooth Settings and then tap the 'Bluetooth ActiveSync Setup' button, which creates a bond ready for BT ActiveSync.
Of course, you may know this so this may seem like a silly suggestion, but this is the mistake I made after a ROM upgrade... :roll:
BT ActiveSync Problem on XdaIIs Solved
Hi SiliconS,
Thank you very much for your suggestion. My Xda can ActiveSync via Bluetooth now. I am very happy with it.
It was 3 weeks after upgrading, I searched thru the posting on the Internet. I share my problem and request help. Almost everyday looking the site waiting for the reply.
Tonight is my great night, you came with suggestion and solve my problem.
After I removed bonding device, I performed Soft Reset. On Bluetooth Setting, I unchecked Passkey Require, uncheck Inbound and Outbond Com Port, then select Start and continue rebounding device.
<Abah – XdaII WM2003SE, Upgrade with Asian Version>
SiliconS, Wrote : <<Maybe a stupid question, but did you re-create the ActiveSync bluetooth bond on your XDA2 before trying to use AS? I made this mistake after a ROM update a while ago.
After the ROM upgrade, don't just create a new bond to the PC through the Bluetooth page. You must go to Start -> Settings -> System -> Bluetooth Settings and then tap the 'Bluetooth ActiveSync Setup' button, which creates a bond ready for BT ActiveSync.
Of course, you may know this so this may seem like a silly suggestion, but this is the mistake I made after a ROM upgrade.>>
Related
I recently got a Bluetooth dongle for my PC but can't get my XDA-II to use any of the services !
When I select ActiveSync and the Sync with Bluetooth I get
'Cannot start communications with the desktop computer. The communications prt is not available. Another program may be using the port, or it may not be valid.
Quit any programs that may be using the port and reconnect. If the problem persists, restart your device using the instructions provided by the manufacturer.'
When I choose Bluetooth settings and select 'Bluetooth ActiveSync Setup'->Start on the XDA II I get 'Please bond with other Bluetooth device which supports serial port or ActiveSync profile as your ActiveSync partner !
The PC has the ActiveSync service enabled and I am now stuck. Please help.
Try this utility.
http://bluetooth.i-networx.de/index_e.html
Install it, do a soft reset. Delete previous BT connection and find again.
you should get an option to sync on your XDA II with the specific computer.
:wink:
ActiveSync Via Bluetooth with Troy Windport
Have tried all suggestiosn including http://bluetooth.i-networx.de/index_e.html
Activesync starts to connect an then drops the connection
Have w2k, ActiveSync 3.7.1 and TRoy Windport bluetooth PCMCIA card, XDA II with Latest 6.10.50 upgrade
Only option left is to change/upgrade operating system to XP which I do not want to do.
Anybody got a better idea?
Thanks
[email protected]
try following this tutorial at geekzone
http://www.geekzone.co.nz/content.asp?contentid=2417
try to turn off infrared communication on ppc.
try to delete all bounded devices both pc and xda.
try to search for a bt device again.
You have to follow the above mentioned procedure. After that you start to search the device with ActiveSync.
ActiveSync will start to check all the serial ports, one port before it comes to the port that is used by your BT stack, you should start ActiveSync via BT on your XDAII.
This is the only way (for me) to get that crap working. After the XDAII and the computer have found each other, future syncs via BT are no (or at least not a big) problem. If the XDAII and the computer sometimes dot not find each other, try to sync 2-3 times, it will hopefully work then. Sometimes there seems a kind of timeout error.
I don't use BT anymore 'cause it is really a hard job to get it running. Even when I managed to establish the connection, after some days the connection gets lost again and can only be repaired by re-installing the BT stack or ActiveSync - I am really tired of beta testing all the bluetooth stacks and stopped to use it until the industry established a working standard...
I try a lot of time after install Tobias application for BT, but I can not see the new dialog after pair my XDA II with PC. Someone help me!
I had the exact same experience. I have not sorted out my the BT problems yet but suffered also from the interrupted connection using the cradle until I disabled Norton anti-virus and firewall.
HELP!
No connection possible between my PC and MDA-II.
Bluetooth Devices program in Windows XP SP2 comes up with "incoming port: 17", while ActivSync seraches only ports 1 to 9.
How can I make them listen to the same port?
http://www.geekzone.co.nz/content.asp?contentid=3163
this guide solved my sp2 bluetooth problems
Rudegar said:
http://www.geekzone.co.nz/content.asp?contentid=3163
this guide solved my sp2 bluetooth problems
Click to expand...
Click to collapse
Rudegar, I used this website for setup, but that Bluetooth-port problem still exists
are you using the vidcomm bluetooth stack or the ms one ?
are you using the bluetooth tools url'd to in this threaD ?
Rudegar said:
are you using the vidcomm bluetooth stack or the ms one ?
are you using the bluetooth tools url'd to in this threaD ?
Click to expand...
Click to collapse
I downloaded de Microsoft SP2 drivers (as mentioned at that Geekzone url).
i'm talking on the xda not on the pc
Rudegar said:
i'm talking on the xda not on the pc
Click to expand...
Click to collapse
On MDA-II I didnt change anything. I use the same drivers as provided within ROM 1.72.
Hi all,
Since upgrading to the recently released O2 ROM I can no longer get my activesync to work over bluetooth. I have reinstalled the bluetooth module on the PC and tried many many times to connect - without sucess.
Usually I just make sure of the following:
XDA2 paired with laptop (Dell D600).
ActiveSync BT profile installed and set to COM4 (in this case)
Activesync itself has COM4 in its settings.
Then usually, I go to activesync on the XDA2, hit sync over bluetooth and hey-presto! But since the upgrade I get nothing...no messages, no failure, no connection....just nothing.
Has anyone seen this and found a way out? I have trawled the forum but nothing seems to help.
Cheers - Rich
Hi,
It is very odd. I know and this happen to three XDA II devices in our office after the upgrade. If you experiencing the following.
1) Go the ActiveSync of XDA and select Tools and then Connect Via Bluetooth. Nothing happens. None of the usual dialog box saying "Opening Port".
This is how I got it working again for all three devices.
1) Uninstall the bluetooth application and driver from your PC and reboot.
2) Reistall the bluetooth application and driver.
3) From the XDA II.
a) Remove any previous pairing that you may have made before.
b) Go Start -> Settings -> System -> Bluetooth Settings
c) Click the "Start" Button
d) Select the Bonded Devices Tab
e) Select "New" and go through the pairing process.
4) Now the bluetooth via ActiveSync should work.
Note:. Check on bluetooth settings the comm port setting used and make sure that ActiveSync is using the same comm port. Also upgrade to the latest ActiveSync version 3.7.1 Build(4034).
Hope this helps.
Regards,
Kueh.
Hi There.
I had this problem also.
All I did was go into ActiveSync on the PC and deleted the bonding between the two devices. (Its in the file menu somewhere). Then on the PPC, go to Start, Settings, System, Bluetooth Settings, then click on the ActiveSync setup and start a fresh.
Good luck, hope it all works.
Rob.
EXCELLENT!!
Many thanks - in my rush I had forgotten to tell it to start the bluetooth activesync setup as described in your mail.
Many thanks - R
Like on subject: is Bluetooth Tools needed anymore with the new ROM 1.66ITA?
Thanks!
Bye
I use the 1.6 WWE ROM on my O2 XDAII and can get ActiveSync etc working fine without installing the BLuetooth tools software. I had a few problems to begin with though after the upgrade, but solved them by removing all the bondings and partnerships between XDA and PC. After that, go through the ActiveSync setup wizard in Start, Settings, System, Bluetooth settings. When you are there, note the serial COM ports that the Bluetooth connection will use, as mine changed after the upgrade and had to be changed to reflect that in ActiveSync on the PC.
Hope that helps,
Rob.
Hi all,
I'm running 1.12.00 WWE after upgrade from O2's German firmware, and all was good. I also gave the new BCHS bluetooth patch a try, didn't seem to have any benefits though.
My problem is that the bluetooth setup in my software looks different from that detailed in all the online help documentation, so I can't follow the instructions to set up activesync via bluetooth.
In 'Settings', I have a 'Bluetooth Setting' item, which in turn has a 'Press Start to setup' activesync option, but all that does is ask me to start bonding with other bluetooth device which supports serial port or activesync profile as your activesync partner.
I can't get past that, as my phone is already paired with my laptop.
Any suggestions on how I can either get this to work as-is, or what I need to do to get the neccessary bluetooth settings software back on the Magician?
Thanks!!
Hi at all,
there were many questions how to connect the magician to ActiveSync via Bluetooth. There were many problems and for some people, like me, nothing worked.
Now I wrote my solution which I found out and made an instruction site:
http://www.jackclick.de/mdac-en.html (english)
http://www.jackclick.de/mdac.html (german)
I hope this helps anyone. :-D
Bye,
Jack
IN addiction i attach a link to an old post:
http://forum.xda-developers.com/viewtopic.php?t=35400&highlight=[/url]
ActiveSync via BT
If set up all settings correctly ActiveSync via BT connecting always fine. & this programm helps you to connect it in one tap include turning BT on.
Sync `Bluetooth.lnk for our device, working only when builtin connecting connectable, and close.lnk terminating repllog.exe & turning BT off.
Correct your own links!!!
thanks a lot. we are lucky that you are using jam kidding. thanks again.
help with bt activ sync
hi
in the activsync option menu is disapair the bluetooth option.
when i see with the registry editor in the: hkey_current_user\comm\rasbook no bluetooth directory.
can anybody help to put it back
thanks