Hello
I instaled the XDAtools , Activesync and all the rest but it not works.My xda is working I think becouse it goes on Bootloader screen V5.15 , on test screeen and backup to SD screen.
When I connect it to the computer (Windows XP) it comes out an erorr mesage :
"One of the usb devices attached to this computer has malfunctioned , and windows does not recognize it"
What can I do , someone can help me please.
Thanks
Alessandra
Related
Hi , i cooked a rom to change language everything works now BUTTT!!!!
the device doesn t conect to activsync anymore , the comptuer detects it on usb ''unknown device'' activ sync does not !!!
i cant even use the phone any more either .
Can someone please help !!!
thanks
hi to everyone,
about a year ago, i patched thr spl...now is 2.13.0000. Yesterday i tried to install to my imate jamin (s200) the new qtek s200 italian rom. The process start successfully and cheked the version. When the phone reboot itself and shows the bootscreen, he program said that there was error 260 and cannot continue; on the phone screen reamin the boot section. When i try to rebbot, it works, but in this way i cannot update my phone. How i can solve this??
i use windows vista and windows mobile device center 1.0 version; also, i used on innotek virtual machine, windows xp with activesync 4.5I would like to inform you, if you can help, theat about a month ago i sent my phone to the assistence because the audio didn't work (is it possible that the assistence did something that block the update??
thanks and please help!!
on the bootscreen, compares RUU on the right-up side,ipl 2.13,spl 2.13 and (all writes are in the red section) and usb on the left-bottom side (on white background)! that's all, i think i've said everything...please HELP!!!
THE PROBLEM IS THAT PROPHET CANNOT CONNECT AT USB IN BOOTLOADER
i've tried, also, to use camera + softreset and when reboot the writes RUU disappear, but still not recognize on usb when in bootloader.
Someone can solve this problem? please....
your problem is vista!
use native windows xp and not VMWare or some Virtual Computer!
have the same strange errors if i flash with vista.
how you have flash your ipl to 2.13??
i used the pdamobiz...i think my ipl was 2.15.0000, and after downgrade, it becomes 2.13.0000. Sound strange? So, do you think the problem is vista and the VM? but i read in this forum that lots of people flash hos phone using xp on virtual machine....but you mean that in vista if you plug the phone (botloader) in to computer, windows doesn't recognize it?
i havent test "win xp vm" on a "vista host". my work laptop has vista and i cant update any rom/firmware. vmware use the host system and his driver to route the usb device. possible the usb-subsystem in vista is changed to much ;-)
test it ... if work ... ok ... we can debug it!
SOLVED
SOLVED! I flashed the prophet on "real" xp. Now my spl changed to 2.20.000 and ipl remain at 2.13.0000. I have another question: if i flashthe phone with one rom of wm6 (which is better?or which is the rom with less bugs?), can i reflash with a wm5 rom without problem?
thanks in advance and thanks for your advice!!
hi bro
My Herald have a big problem. it's freeze on the HTC spash screen and can't load the ROM. I've made a hard rest, it's done but the problem ist still present.
I've download the Windows Mobile 6 RUU on the HTC official site but it's impossible to do the rest because ActiveSync is not connected with my phone. How can i resolve my problem without ActiveSync?
see this post 6
this method work!
http://forum.xda-developers.com/showthread.php?t=340618
I've done all said in the forum you have indicate but nothing....
I fear that my device is not out!
WaveMaster1406 said:
hi bro
My Herald have a big problem. it's freeze on the HTC spash screen and can't load the ROM. I've made a hard rest, it's done but the problem ist still present.
I've download the Windows Mobile 6 RUU on the HTC official site but it's impossible to do the rest because ActiveSync is not connected with my phone. How can i resolve my problem without ActiveSync?
Click to expand...
Click to collapse
Have you placed the phone into bootloader mode before using the RUU? (Holding the camera down and pressiing the soft reset button?)
Activesyn won't recognize the phone if connected during bootloader ... but if the phone says "USB" on the bottom left, you can run the RUU and it will work.
My device display "USB" in bootloader mode when i connect it to my PC.
But the problem is that the pc can't detect a new device connected...
When i try to flash by the SD card my herald can't detect the card!
I'm affraid! Please HELP ME!!!
why you d´ont write more?
isp XXXXXXXXXX
spl XXXXXXXXXX
card formatted at FAT 32?
camera + comm + reset ?
and was see you
"card not recognized?"
i am not a profi, but if one one this read, can you help
i find this in herald forum from here, try it again, and again....
and answer.
Ciao
why you d´ont write more?
isp XXXXXXXXXX
spl XXXXXXXXXX
card formatted at FAT 32?
camera + comm + reset ?
and was see you
"card not recognized?"
i am not a profi, but if one one this read, can you help
i find this in herald forum from here, try it again, and again....
and answer.
Ciao
IPL 1.08.0001
SPL 1.08.0001
It's normal that i get same informations about IPL and SPL?
I've done the procedure to enter in bootloader mode
But my computer don't detect it and my device display "USB" in the white area
of bootloader screen (this is normal)
But i don't know why it can't read my card with HERAIMG.NBH file inside!!!
The version of my bootloader is not displayed. Is it normal?
Per aps my bootloader get to be flashed, but how can i do it if it's the source of my problem?
PLEASE YOU ARE MY LAST SOLUTION!
about ipl 1.08xxxx and spl 1.08 xxxxx (very bad problem)
http://forum.xda-developers.com/showthread.php?t=343760&page=2
1 you have original Ruu.,.,......ship.exe
try it again when you are in bootloader mode, and reply. goes or not?
2 you have your original ruu..........ship.exe
whit winrar extrat all, and you have to rename the ruusigned file (60MB or more MB not the file with 1 MB!, to HERAIMG.nbh.
if dont work i some not can help you i m sorry.
my device work after many problem again but i have no WLAN and i have not isp 1.08xxxxxxxxxx
i wish you can write very good new!
show in your computer
if you are in bootloader mode wiht herald
if you have a networkcard not active! reactive this now
i had wm5 and his sync automatic
but after data crash on herald with wm6 does not sync again,
i search in my computer and a have see that 1 windows mobile device card does not was connect and i have reconnect this. and momentanly works again good with wm5, wm6, touch flo
show, you have no other way
ciao
Hi
I have some problem whit synchronizing my p4350.
everytime when I connect my phone to my notebook (usb) vista says that he has found a unknown device.
I already reinstalled windows mobile center (2x) (with rebooting).
But my notebook still doesnt find my phone.
This is really annoning.
I am using the touch-it rom
Could someone help me?
greetings
Try changing the USB Port you use.
Also download and install the latest Windows Mobile Center v6.1 from Microsoft and try again.
Regards
also these 2 things doesn't work
anyone??
?
I still trying to connect my p4350 to my notebook but it just doesnt work.
I tried another pc and that worked :S
I also tried severel usb ports but they all give thesame alert, that my device is unknown :S
Hello
I've got a problem. I want to flash my ROM to WM6.5.
I connectet my Phone with Vista over USB-Port.
The ROMUpdateUtility.exe start the GUI.The phone disconnect from Vista and the Install GUI shows me after few seconds the ERROR 260, that my Phone ist not connectet.
On my Phone I see the three coulored Monitor. On the left lower site is written "USB".
I tried to hold the connection with Vista ( i startet the Camera or other Applikation ) but the same problem.
Whenever i start the ROMUpdateUtility.exe the same. Disconnect and never connect again.
What can i do, that my phone stay connectet with Vista, so the Install GUI can make his work?
thx AcidC ( and sorry for my bad english)
run artemis uspl first
remove any sd card if u have
and then try it
Hi,
we tried with and without microSD card and or sim card.
The real problem is the connection which is interrupted and doesn't rebuild.
Independent of trying to flash the WM6.5 or USPL.
Silly question, but you never know..Do you have Windows Mobile Device Center installed in your PC and is your device connected to it? It is the "Activesync for Vista". The three coloured screen is normal, it is called Boatloader. After that you should have a progress bar of what you are updating (rom,radio..uspl..etc) on both PC and Artemis. In my case, when i got error [260] it's always because I forget to remove the SD card. I know you already tried this but keep it away from device when you flash.Your problem is maybe about Vista Drivers for Artemis, there are threads concerning it. Before you investigate further,try to install/reinstall Windows Mobile Device Center, change USB port and flash with a freshly booted PC. Hope you'll get the magic.
P.S. USPL flash is ABSOLUTELY THE FIRST THING TO DO!
Workaround: try to flash with a PC running XP
You need RUU for vista
Ok. I tried it again, but like u said, i need USPL and WM6.5 RUUs for Vista. But can u help me? I don't find somthing :-(
I consider myself beeing quite lucky for not having needed this even if I'm on Vista,hope helps for you: http://forum.xda-developers.com/showthread.php?t=337097
Use these drivers for Vista:
http://forum.xda-developers.com/attachment.php?attachmentid=33662&d=1169888879
Yeahhh ... Now it works. Thank U all. And now i understand. I had to update my MobileSyncDriver in Vista. Thank U very much