Expertssss and gurusss ... i need help concerning the letter recognizer ... how come i can't write an i, ? and + symbol using it although i've followed the instructions in the help mode ... i don't know what causing this problem ... maybe u could help me about this problemsss ... TIA ... :shock:
i found I had some problems sometimes doing '!' and '?', I think after a soft restart it was ok again, but im not sure if it was the phone, or just my poor ability to write. As for the i, are you trying to dot it, or are you just just drawing a line from bottom upwards?
sanwijay said:
Expertssss and gurusss ... i need help concerning the letter recognizer ... how come i can't write an i, ? and + symbol using it although i've followed the instructions in the help mode ... i don't know what causing this problem ... maybe u could help me about this problemsss ... TIA ... :shock:
Click to expand...
Click to collapse
I had the same problem when installed some software...but I don`t remember which one...only the hard reset solved my problem :roll: ...at the same time I have the problem od cutting the right edge of the display...looks like the screen enlarged and some icons go out of it...For the letter i try to write a line on the letter recognizer from the top to the bottom (inside the abc side)....for the the ? and + simbol write it in the 123 side of the letter recognizer...I`ve got the same problem..then I noticed that was writing in the wrong side
regards,
Primoz
p.s. Hope this help U...
Related
Hi there! Been using my Qtek S100 for a couple of days now, and enjoying it more and more every day!
But, I've been experiencing a quite annoying problem.
As said in the topic, PocketMusic f***s with Letter Recognizer.
It is noticed like this:
Have PocketMusic running. You don't need to be playing music or so, just have it in memory. Then you try to type a message or something using Letter Recognizer. Then, some letters will NOT work as they do normally. For example:
According to the software, you can type the letter "t" either by:
1. Drawing a vertical line, lifting the stylus, and then drawing a horizontal line a little above center on the vertical line.
2. Same as above, but without lifting the stylus.
3. Typing it as a 7.
Now, when PocketMusic is running in the background, only version 2 and 3 works! When you try to do it as nr. 1, you see that a "t" shows up, but skips back to an "l" instead, but fast as a blink. The same applies to the letter "i", which you can't type by drawing a vertical line from top to bottom and then putting a dot on top. It will become an "l" instead there too!
So, it seems that, while running PM, you can't lift the stylus while typing a letter. Maybe this isn't too annoying for most people since you can type the letters in other ways, BUT, for me being a scandinavian, I can't type the scandinavian letters åäö AT ALL!
Has anyone else noticed this? Does anyone know what to do about it? (Other than turning off PM, telling me that would only insult my intelligence) Does anyone know if this problem is old? I seem to recall having this problem years back on my Pocket Loox 600, but I'm not entirely sure...
There must be other people experiencing this problem, please share your experiences and solutions!
Thanks,
Petter
I have noticed the same thing, thought i was just going senile! Must be a bug or something, does anyone know?
Fin
petterekman said:
Hi there! Been using my Qtek S100 for a couple of days now, and enjoying it more and more every day!
But, I've been experiencing a quite annoying problem.
As said in the topic, PocketMusic f***s with Letter Recognizer.
It is noticed like this:
Have PocketMusic running. You don't need to be playing music or so, just have it in memory. Then you try to type a message or something using Letter Recognizer. Then, some letters will NOT work as they do normally. For example:
According to the software, you can type the letter "t" either by:
1. Drawing a vertical line, lifting the stylus, and then drawing a horizontal line a little above center on the vertical line.
2. Same as above, but without lifting the stylus.
3. Typing it as a 7.
Now, when PocketMusic is running in the background, only version 2 and 3 works! When you try to do it as nr. 1, you see that a "t" shows up, but skips back to an "l" instead, but fast as a blink. The same applies to the letter "i", which you can't type by drawing a vertical line from top to bottom and then putting a dot on top. It will become an "l" instead there too!
So, it seems that, while running PM, you can't lift the stylus while typing a letter. Maybe this isn't too annoying for most people since you can type the letters in other ways, BUT, for me being a scandinavian, I can't type the scandinavian letters åäö AT ALL!
Has anyone else noticed this? Does anyone know what to do about it? (Other than turning off PM, telling me that would only insult my intelligence) Does anyone know if this problem is old? I seem to recall having this problem years back on my Pocket Loox 600, but I'm not entirely sure...
There must be other people experiencing this problem, please share your experiences and solutions!
Thanks,
Petter
Click to expand...
Click to collapse
Try to write : or the question mark in the 123 bar...it has the same problem ...but I have not installet the PM...but some other stuff, and I still don`t know whichone messup the Letter recognizer...:roll: :roll:
Regards,
Primoz
I know. Anything you try to write that can't be written without lifting the stylus wont work!
And for me, it is definately PM. Shut it down and it works perfect... Wonder what messes with you.
Anyone has anything on this one? Come on guys! This problem is old, someone must know!
For me works only in case of Hard reset...
regards,
Primoz
p.s. Any suggestions or tips are wellcome...
i just got the dopod cht900 and it has the chinese keyboard and rom. i got it flashed to the english rom.
however, it seems that the keyboard secondary buttons (the one where you need to press the blue dot before pressing the key) are not in the right place. for example, on the keyboard it shows '!' if I press the 'W' key but instead it turns out to be '?'
is there any way to overcome this problem by hacking the registry and if so, where can i do it?
any help given is much appreciated.
This has been asked before in that forum, search b4 posting plz.
Look at the keyboard hack here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
pof said:
This has been asked before in that forum, search b4 posting plz.
Look at the keyboard hack here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
Click to expand...
Click to collapse
Thanks for your help. Didnt see this when I was looking thru earlier. By the way, I can only use the second solution as the first does not work right?
right, and if the second isn't good for you you can try the first and modify the wiki adding the thing that works for you giving adivse to others... that's what's all about!
pof said:
right, and if the second isn't good for you you can try the first and modify the wiki adding the thing that works for you giving adivse to others... that's what's all about!
Click to expand...
Click to collapse
wow it works great. had some problems initially because i got the hexadecimals and decimal values mixed up
All Keys AlphaNumeric and Symbols are Working Except for TAB Keys
I change the Reg Settings for Keyboard Layout from 20409 to 20404.
The Results are all AlphaNumeric and Symbols are in place and perfectly working but the only problem is the TAB Key is not working totally no response.
Any help you pls need your instruction?
Jesus loves you all
Hi all, this is a problem that I don't know how to solve.
When I press the ""a/s" button in a 20 keys keyboard having Xt9 active, the first character that appears is "s". This does not make sense for Spanish as "a" should be the first one. Now, everytime that I want to writte an "a", I have to change from "s" to "a" and this is a mess...
Pls, pls, pls... anyone that knows how to change these prioroties?
Thanks!!
Try this, Paul at modaco made a great little fix for this. It works on UK devices, so may work on yours.
http://www.modaco.com/content/pocket-pc-professional-news/265559/htc-touch-dual-c-to-a-fix/
Hi all,
I have upgraded my mobile to PDXHL2 and everything works fine (my i780 has Eng and arabic Keyboard).
My problem in the keyboard!!!
I have the mail symbol on the keyboard if I press it; it will show as GPS shortcut (in other country)...anyway next to this botton is "." and "!" botton
if I press it when writing it will open the mail box/sms and I can't find the dot "." botton!!!
in the left of the "0" botton I have "AB" which it should be used to switch between the langauge (It needs for my case Arabic installation)
Sorry for my long message but just want to change the keyboard back like before
Thx
Anyone can help...
in addition....If I install Arabic the keyboard (external) wont work proberly
Try asking your question here or Q&A forum on XDA-dev:
http://www.ppcsg.com/index.php?showtopic=100402
Thx...I'll try
Did you find the solution to the keypad mapping???
Nop...!!!
I'll post now on PPCSG
I couldn't post it there...I'm wondering why?
Maybe I have to write 10 atricles?
Can someone help?
++++++++++++++
Now I post it...it was activation issue
No one reply...!!!
No Answers...it seems I'm the only one having this problem?
Ok can Any one get me keybad or keyboard layouts files so I can replace it in my mobile?
Any Idea?
Hi all, not sure if I'm the only one with this problem. Initially, when creating new SMSes, under the "To", when i start to key in the first few alphabets of the contact's name, the suitable names that begin with those few letters will be displayed at the top of the keypad for me to choose, so i don't have to key in the whole name. But i notice that recently, i have to key all the alphabets of the name, before it appears at the top of the keypad for me to choose? I never install any new programs before this happened so i doubt it's a clash of software. Anyone has this same issue as me?
yeah, there seem to be a problem with the hd.. i use the classic windows keyboard and it did not show up earlier.
so i followed some guys instructions with some registry edits and its working alright now. but the large qwerty of htc still has the problem. i dont use it so its no biggy for me as long as my classic keyboard works.
and on the large qwerty, i noticed that it showed up the suggestions as soon as u hit backspace after u write the first two or three letters of the name. for example, if u wrote 'smit' and hit backspace, it would show up 'smith 7906561' on the suggestion list..
this is what happens to me on the large qwerty.. check whether it happens on urs.. and if ur using the classic keyboard, i'd post the registry edits i made.. goodluck!
Appu said:
yeah, there seem to be a problem with the hd.. i use the classic windows keyboard and it did not show up earlier.
so i followed some guys instructions with some registry edits and its working alright now. but the large qwerty of htc still has the problem. i dont use it so its no biggy for me as long as my classic keyboard works.
and on the large qwerty, i noticed that it showed up the suggestions as soon as u hit backspace after u write the first two or three letters of the name. for example, if u wrote 'smit' and hit backspace, it would show up 'smith 7906561' on the suggestion list..
this is what happens to me on the large qwerty.. check whether it happens on urs.. and if ur using the classic keyboard, i'd post the registry edits i made.. goodluck!
Click to expand...
Click to collapse
Link to that topic?
I'm using the Full qwerty, and nope it still isn't working after i hit backspace.
Appu said:
yeah, there seem to be a problem with the hd.. i use the classic windows keyboard and it did not show up earlier.
so i followed some guys instructions with some registry edits and its working alright now. but the large qwerty of htc still has the problem. i dont use it so its no biggy for me as long as my classic keyboard works.
and on the large qwerty, i noticed that it showed up the suggestions as soon as u hit backspace after u write the first two or three letters of the name. for example, if u wrote 'smit' and hit backspace, it would show up 'smith 7906561' on the suggestion list..
this is what happens to me on the large qwerty.. check whether it happens on urs.. and if ur using the classic keyboard, i'd post the registry edits i made.. goodluck!
Click to expand...
Click to collapse
I think you guys have the same problem as the Touch Pro - it's T9 getting in the way. If you disable T9 then you can use other keyboards (there's a new shiny black on in the Blackstone forums) and get predictive text working properly or use the Full QWERTY keyboard which will likely work with a few kinks. Here's a long but detailed article on what to do to fix it and what you gain and lose: http://www.fuzemobility.com/?p=1527
since the Pro and HD have the same software and are similar on hardware I'm presuming this is exactly the same issue.
here you go op this works
HTC Clone said:
Hi all, not sure if I'm the only one with this problem. Initially, when creating new SMSes, under the "To", when i start to key in the first few alphabets of the contact's name, the suitable names that begin with those few letters will be displayed at the top of the keypad for me to choose, so i don't have to key in the whole name. But i notice that recently, i have to key all the alphabets of the name, before it appears at the top of the keypad for me to choose? I never install any new programs before this happened so i doubt it's a clash of software. Anyone has this same issue as me?
Click to expand...
Click to collapse
hiya i had the same problem but was very happy to get the help that i needed,by a member called AE, so credit to him and follow this thread http://forum.xda-developers.com/showthread.php?t=455892 and you will see a guide by AE which will resolve your problem op this helps bye
marvi0 said:
hiya i had the same problem but was very happy to get the help that i needed,by a member called AE, so credit to him and follow this thread http://forum.xda-developers.com/showthread.php?t=455892 and you will see a guide by AE which will resolve your problem op this helps bye
Click to expand...
Click to collapse
That's the same tweak I suggested- it disables T9...mine i just a cab.