In my Contacts in WM 2003 I used to be able to define an access number before I call my contact e.g.:
08707940000,,01xxxxxxxxx.
Where the first number is access number and the second is the contact's number.
However now, the phone only dials the access number (the first number) and after a short pause I can hear it dialling 3 to 4 DTMFs but it is not actually dialling them because the provider is not picking it up the DTMFs.
I have to dial the numbers manually and than its OK.
Can anyone reproduce this? Please help!
Same issue here... I have a contact like this:
+3493532XXXX,1234#,0561617XXXXXXX
This dials +3493532XXXX (my home number) where I have an asterisk box, then I hear the message "Please enter your password followed by the pound key" and the DTMFs for the password and # key are sent correctly (in the number the passwd is 1234), then I hear the tone where I can dial any number, I dial 056 (prefix to use FreeWorldDialout on my asterisk) and 1617XXX (USA Boston number)... I hear all the numbers, but I see my asterisk hanging up before the whole number has been sent.
Very weird... I will do some more tests to see if I can find any solution...
Ok, finally I got the solution... do not put more than 4 digits without a comma (pause)... i saved my contact like this and now it enters the password and dials correctly:
+3493532XXXX,1234#,056,1617,XXX,XXXX
Hope it helps you too! :shock:
I did what you did, the problem seam to be that the DTMF tones are not sent at all aldough I can hear them.
I'm getting this too very odd. Getting rather bored of holding the phone up to my speakers so I can play the right tone and empty my voicemail box!
hi.. got my vario II on friday, and i have the same problem. i used to be able to dial an international number on my UNIVERSAL by calling the local access number and insert a pause before dialing the international number for example: 02071246666,006596454343. however, this does not work on vario 2 and i am very upset about it!!
Hi,
you have checked this:
HKLM\Drivers\BuiltIn\RIL: EnableDTMFSupport = 0
switch to
EnableDTMFSupport = 1
Hi,
Thanks for the help, but i tried that, but it was already set to "1".. i switched to "0", soft reset, switch back to "1", soft reset again, but still not working...
I am also having this problem, cannot empty voicemail at the moment.
I have the same problem on my Vario II. When I'm entering the number manually during the call I can hear the sound, but the other end does not respond to my input at all.
This is really annoying as I can't get into my voicemail or contact customer service
Anyone had a solution for it so far?
Are there more people with a TyTn/Vario with this problem? If so, do respond because it might be a bug or something...
Motje said:
This is really annoying as I can't get into my voicemail or contact customer service
Click to expand...
Click to collapse
On my Vario II if I go to the phone app dial 150 and when connected then press keypad I can then navigate the customer service menus by pressing the on screen number keypad if that is what you mean?
Yes, that is exactly what's not working for me. I can press the keys during the call, and I hear the tone, but somehow the other end does not get them.
Interesting topic I just saw on MoDaCo: http://www.modaco.com/Problem-with-Phone-Dialer-on-Hermes-t247377.html
It turns out that it is not just the DTMF, but also the d-pad up key not going to the call history, and the 3G icon having changed to U.
This all happened after a hard reset.
Can anyone else who did a hard reset confirm if they have any of these problems?
Check that
HKLM\SOFTWARE\HTC\3GVTEngine\AMRDTMFToneFile = "\windows\dtmf122.amr"
then try changing the value of
HKLM\SOFTWARE\HTC\3GVTEngine\UseAMRDTMFTone
from 1 to 0 or 0 to 1
No idea what it means, but it is set up in some Preconfig setups
Excellent, I solved my problems. What I did was re-install all the cab files from the extended ROM. This gave me back my T-Mobile dialer and also made the DTMF working again.
Motje said:
Excellent, I solved my problems. What I did was re-install all the cab files from the extended ROM. This gave me back my T-Mobile dialer and also made the DTMF working again.
Click to expand...
Click to collapse
That worked for me to.
Mine worked fine untill I installed the DeepOcean dialler skin and then it stopped working - removed it and it came back (DeepOcean lacked smartdial).
Installed the Eten dialler and smartdial, and have lost the tones again, think this phone skin is great, but it won't properly uninstall (need the original T-mobile phone skin/graphics) so am currently stuffed!
Have done all the usual soft reboots etc.
I'm confident if I re-instated the deafault t-mobile dialler it would come back, however, I don't want to do a hard reboot and reinsatlll all the add-on apps and data.
Any ideas how to get the DTMF tones working - I can 'hear' them, they are clearly not being sent, If I put it on speaker phone, then in clear conditions the mike picks it up and it works!!
Any ideas?
DTMF Doesn't work - FIXED IT!
Fixed it!!
Editing the registry and setting the value to 0, then soft reboot and dtmf tones are working.
Setting it to 0 wasn't the obvious choice, and previously I hadn't soft rebooted.
Found the following from dhushy in:
http://forum.xda-developers.com/showthread.php?t=276700
Worked it out. For anyone with a similar problem, use the registry editor to locate the following key:
HKLM,"Drivers\BuiltIn\RIL","EnableDTMFSupport",0x0 0010001,1
Change the value from 1 to a 0 and Bob's yer Uncle (for non-British readers that means everything will be cushty - see Only Fools and Horses for a contextual translation)
Did this and I was able to manipulate my voicemail messages as normal.
Click to expand...
Click to collapse
I am on T-Mobile UK.
A Big Thank you
This advice on changing the dtmf code from 1 to 0 was the thing ive been lokking for - for the last 4 months. A really big thank you
Hey all,
I've been trying to troubleshoot a problem I have when pressing my dial pad number 1 and have been unsuccessful myself, maybe one of you might have some insight. I'm running an ATT 8525 w/Black Satin Normal WM6 ROM and my organization utilizes Good Messaging for exchange server communication.
My problem is whenever I press/tap (not type and not hold) the number 1 my voicemail is auto dialed and my Good Messaging contacts are maximized. I am unable to dial any phone number that utilizes the '1' digit because of this problem unless I create a contact or type it.
I've trolled the Good tech support page and found no such problem. I've tried reinstalling Good to no avail.
Any suggestions?
UPDATE: I've installed an alternative dialer skin and all is well.
I'm having issues with my Eten Dialer all of a sudden on my 8525 (wm5, never flashed the rom). When I start to dial a number, all of a sudden my Contacts screen will pop up, which is highly annoying.
I uninstalled the dialer and reinstalled another color and still have the same problem.
Is it trying to activate the smart dial or something (which I know the regular version of the eten dialer doesn't have)?
Anyone else have this problem or can offer any advice?
Or if worse comes to worse, is there another big number dialer that works well on the 8525 that you can recommend to me? (or a working cab of the eten dialer with smart dial?)
Thanks!!!
Ok, quick update. I uninstalled the eten dialer, and the same thing is happening with the native dialer (after punching in 3 or 4 digits, it launches my Contacts screen in my Outlook (Good Software).
I did go to options and try to disable smart dial, but it doesn't do anything.
Can anyone help?
Thanks.
not sure if it works on yours, but if you wre to download any that doesnt have smart dial, it should disable it http://www.paulya.com/dialerskins.htm
Hi guys,
I have just cooked a rom for my wizard based on a dump of WM6.1 TNT 19199 and found a weird problem.
The phone does not response to any extension number or any further input.
For example, my friend's number is 85213800 ext. 122 . When I dialed 85213800 it got through and prompted me to dial an extension number. I input 122 and clearly heard the sound of keypad but the voice on the other end still asked me to dial an extension number. The phone did not response to my further input obviously.
The same problem happened when I called some service centers. It is pretty annoying.
I met this problem before on some of the cumstomized roms but forgot how to solve it. It seemed to be related to some registry settings or in lack of some files.
Anybody has any clue? Many thanks
Any hint?Thanks
Hi there,
I have a Moto Q11 from Vivo (Brazil) and it came with wonderful little app called "EP", which does a simple yet awesome thing:
It will replace (or add) as a prefix, the operator code I choose. No matter how the phone is stored in phonebook (already with the operator code, city code, or just the number itself) it properly adds or alters the phone when I dial it.
You may configure it with the operator of your choice, and change it as you please. For example, let´s say all my phonebook entries are with "015" as the long distance operator code (eg. 0151121342213). If I configure the app with another operator (let´s say, 031), when I hit dial, it will in fact dial 0311121342213. The actual phone in the phonebook is not altered. If the phone number is stored as 1121342213, it will add the 031 as well.
I really need such an app in my Rhodium and Kaiser!
Does any1 have any idea of an app that would do this ? Tried copying the executable from the Moto Q11 to my Kaiser and it didn´t work (it says the app is not for that platform)...
Tia!
I was not able to find a program that would do it. I have found that the EP stands for Easy Prefix, and googling it gave me the impression that this app is standard for Motorola phones.
Any further help would be appreciated...
I got same issue, bro
Can anybody help people like us ?
TA
Just fyi, so far no luck
Have you tried Magicall? ( http://www.mobiion.com/magicall.html )
It can change any number you dial, based on rules. I think this would work for you (so, for example, if you dialed anything starting with 789, it would replace that with 123.
I use it for ADDING numbers to the start, so that certain numbers get dialed using a calling card, but I'm pretty sure you can replace digits as well
-Steve