Related
I just recived my XDA neo 2 days ago and now it's not work The screen stuck at the page of Windows mobile after I open it every time. Even I've tried to soft reset many times and tried to take off the battery but it still not work. Could you guy reccomend me how to deal with this problem
try doing a hard reset see if that work, but you will loose all your data!
aimmipoko said:
I just recived my XDA neo 2 days ago and now it's not work The screen stuck at the page of Windows mobile after I open it every time. Even I've tried to soft reset many times and tried to take off the battery but it still not work. Could you guy reccomend me how to deal with this problem
Click to expand...
Click to collapse
Try to hard reset by holding down the two buttons on the left side of your Neo (Camera and communication buttons) simultanously and at the same time press soft reset. You will see a message "Press Send to restore...". Press Dial button then!
Good luck!
Thank you very much for your help. Now the problem seem to be solve but not all. I did hard reset 3 times after you guy told me and the third is succesful. Then I installed all the program I need again, some of them need soft reset before installation and then I found that maybe the problem is because of the soft rest. Almost everytimes I performe soft reset, it end up at the screen of windows mobile again and stuck at that position then I have to hard reset again.
I searched through internet for this problem, I found that some one also cannot boot their o2 but all of them stuck at the o2 splash water screen, not at windows mobile screen like me. And one of them gave a hint that may be because when I performed soft reset I press the button to quick and I should hold on for two or three seconds but his pda is o2mini and mine is o2 neo, so I'm not sure that it is the same reason or not.
Do you think is that because this o2 neo of my has a problem or is it normal thing that could happen?
Hallo Guy, I think I found the problem. I think the problem because I installed spb pocket plus version 3.0.1 which is the old version to my neo and this cause a problem. I search through the internet again and found another one who have the same problem like me. Actually before I bought this o2 neo, I used HP rx3715 before. my rx3715 use windows mobiles 2003SE so I didn't have the same problem with my old pda. Unfortunately,because I changed to the new one, so I cannot utilize many programs, I used to utilize in my rx3715, in my neo For example this spb pocket plus version 3.0.1 and agenda fusion version 6. anyway thx for your help!!! 8)
aimmipoko said:
I just recived my XDA neo 2 days ago and now it's not work The screen stuck at the page of Windows mobile after I open it every time. Even I've tried to soft reset many times and tried to take off the battery but it still not work. Could you guy reccomend me how to deal with this problem
Click to expand...
Click to collapse
I had the same problem with my Orange SPV M600. The boot blocked in Windows mobile and I discovered that when my device is connected to my PC the boot is long (about 5 minutes) but going to an end
I'm having the same problem... I treid hard resetting it and it doesn't work ..
Anyone..please help..
I figured it out...
Just bought Atom and upgrade it with the newest rom via official web.
Many time the Atom cannot switched ON, only the green led keeps blinking. If somebody's calling, Atom just not ringing. I tried to soft reset but cannot, nothing happened and I need to remove the battery. After that the O2 screen will freeze and I need to remove the battery for 2nd time. Is it normal? Pls help how to fix these problems. thx
try to make HARD RESET
kropotov said:
try to make HARD RESET
Click to expand...
Click to collapse
doesn't help even within HardReset (tap on both power button & reset with stylus)
;(
Try ewnovw the batt, wait a while b 4 u put it back, then press power button.
cyberbug said:
Try ewnovw the batt, wait a while b 4 u put it back, then press power button.
Click to expand...
Click to collapse
yeh it helps but the question is how to avoid this bug.. i'm new to this windows mobile devices thefore looking for the way to stop my atom hanging
You may want to reflash your device with the latest software found at the seeo2 site (or on the ftp here). Your device may be corrupted :wink:
victoradjei said:
You may want to reflash your device with the latest software found at the seeo2 site (or on the ftp here). Your device may be corrupted :wink:
Click to expand...
Click to collapse
new atom had 0426 software installed
just rolled back to previous 0123 .. will keep you guys notified with the results
0123 is too primitive. After your test, re-install the latest ROM which has all the fixes 8)
victoradjei said:
0123 is too primitive. After your test, re-install the latest ROM which has all the fixes 8)
Click to expand...
Click to collapse
agree!
0123 gave the correct sof-reset behavior but performance was very poor
0426 was rolled out again .. the bug became permanent - soft reset fully hangs device
moreover the speaker now hissing.. what the --K
Did you re-download the update, or just re-used the old one on your pc?
On hissing, I noticed that when I use a charger from another device to charge Atom :shock: So I use Atom charger for all my pocket pc's and no problem now. Maybe the more endowed techies can rubbish this :twisted:
victoradjei said:
Did you re-download the update, or just re-used the old one on your pc?
Click to expand...
Click to collapse
new BIN from seeo2.com
Hi,
I've managed to kill my Orbit 2! Everytime it starts up it gets as far as the Windows Mobile splash screen then shows the volumn control (both levels turned down) but goes no further. The power button still turns the screen on and off and the screen still dims after a while with any key bringing it back to full brightness, but nothing happens!
Has anyone else had this problem?
Also, I've looked in the forums, but can't find details anywhere of how to hard reset this phone! The only instructions I've found relate to non-existent buttons!
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
Can anyone shed any light on why this is happening or how to hard reset!
Thanks in advance,
Nick
it is the bottom two buttons (below the answer & hang up) and the stylus for a soft reset.
When it asks for a confirmation hit the green answer button
Hope this helps
Thanks NC35 - that did the trick!
Luckily I backed it up on Sunday so shouldn't have lost too much!
Thanks
Having tried ( now three times with no help ever) to speak to O2 and ask how to hard reset following the start menu completely failing..... I was told it was "impossible" you will need to return it and use the "28 day" repair service.....
I have at last managed to restore - thanks to this posting!!
No comes the reseting process - which is a bit of a bore!!
O2 seem to have dispensed with any actual tech support at all!!
Dave
The procedure of performing hard reset is perfectly explained in the manual that comes with the phone. "hard reset" is included in the index of this manual, so it takes only a couple of minutes to find out what you have to do.
After all, RTFM ;-)
bizon said:
The procedure of performing hard reset is perfectly explained in the manual that comes with the phone. "hard reset" is included in the index of this manual, so it takes only a couple of minutes to find out what you have to do.
After all, RTFM ;-)
Click to expand...
Click to collapse
Now, thats not very hepful is it, especially when you're away on business for a few weeks and don't happen to carry the manual with you everywhere you go...
nid
i killed my o2 xda orbit II as well, but unable to hard reset
sorry guys. I vae the same porblem as nick666 with my xda orbit II. however, hard reset failed!! the window splash screen came back after I hit the green button & it becomes static. I am really worried now. I have done so many paperworks with that xda..anybody please help!!
honeyyati said:
sorry guys. I vae the same porblem as nick666 with my xda orbit II. however, hard reset failed!! the window splash screen came back after I hit the green button & it becomes static. I am really worried now. I have done so many paperworks with that xda..anybody please help!!
Click to expand...
Click to collapse
calm down. read this: http://forum.xda-developers.com/showthread.php?t=381600
most likely flashing another rom will fix your problem
I have downloaded the hard-spl. I'm completely stuck. I can't connect my pda to activesync. activesync didn't detect my pda. by the way, when I reset the pda, screen that asked to press SEND for restore to factory setting turn up few minutes after resetting. press green button, screen automatically shows windows mobile startup screen. I'm still stress, |I'm sorry but I can't helped it..
sorry guys. I have read the instruction wrongly. now it works fine.
many thanks cr1960 who has kindly response to my silly worries
thnaks again.
honeyyati said:
sorry guys. I have read the instruction wrongly. now it works fine.
many thanks cr1960 who has kindly response to my silly worries
thnaks again.
Click to expand...
Click to collapse
NP. Glad you got your problem sorted
Hi, after reading that the PM10A could take windows mobile 2006 i tried it, installed it and broke my PM10A. Now all the thing does is Vibrate, it wont charge or turn the screen on, all it does is vibrate for a short period of time and if i plug it in it will vibrate continously. Also it cannot be seen by the computer or active sync, everybody i have talked to about this says that it is a complete mystery, what i was hoping was to see if any body knows what is wrong and could help me??
I only bought this around 3-4 days ago and therefore quite upset, i know its my own fault due to WM2006 but is it fixable?
Please help me.
The Magician can't take WM6. wherever you read it, it was not true... It can't take WM5 either
I'm sorry to be harsh, but this is something that has been asked a lot of times, and the answer is still no. Closest you'll get as far as i know is the WM6 lookalike rom that someone here posted...
you bricked your phone, methinks... Buy a new one off ebay or something.
Welcome to the forums though
Enter boot loader hold down camera + power button and reset device.connect cable and update
"
The Bootloader
You can enter the bootloader by holding down the camera + power button, and resetting the device.
the reset button is on the bottom right, a small hole. a wallaby reset pin fits nicely in the hole. the magician unfortunately does not have one.(but you can use the magician pencil) "
Works again! Thanks!
grigoreee said:
Enter boot loader hold down camera + power button and reset device.connect cable and update
"
The Bootloader
You can enter the bootloader by holding down the camera + power button, and resetting the device.
the reset button is on the bottom right, a small hole. a wallaby reset pin fits nicely in the hole. the magician unfortunately does not have one.(but you can use the magician pencil) "
Click to expand...
Click to collapse
Great, this works perfectly and now the PDA works normaly again, thanks a lot for your great help, very much appreciated, thanks a lot,
Thanasie
WM5
grigoreee said:
Enter boot loader hold down camera + power button and reset device.connect cable and update
"
The Bootloader
You can enter the bootloader by holding down the camera + power button, and resetting the device.
the reset button is on the bottom right, a small hole. a wallaby reset pin fits nicely in the hole. the magician unfortunately does not have one.(but you can use the magician pencil) "
Click to expand...
Click to collapse
hello is there no chance to upgrade magician from WM2003SE to WM5 ???
No I don't think so.
aaurnab said:
hello is there no chance to upgrade magician from WM2003SE to WM5 ???
Click to expand...
Click to collapse
I don't think so but if you do find something please let me know, thank you.
My Magicain, seems to be permanently stuck in the bootloader mode. I've tried using the original flash RUU (even the NO_ID version) without success. It either doesn't detect my device, or says that it isn't the correct version for my phone (although I downloaded it from the official site).
Any suggestions?
Nokia 3650 said:
My Magicain, seems to be permanently stuck in the bootloader mode. I've tried using the original flash RUU (even the NO_ID version) without success. It either doesn't detect my device, or says that it isn't the correct version for my phone (although I downloaded it from the official site).
Any suggestions?
Click to expand...
Click to collapse
Hi, i dont know if yours is an I-Mate but try to go to the i-mate website and download it from there it worked for me and i was just thinking you should maybe give it a try, let me know what happens.
Yes, I had already used it. This was what bricked my I-mate Jam, in the first place. I tried using the NO_ID tool, to try to connect with my device, but it keeps saying that my unit is not designed for this tool.
Nokia 3650 said:
Yes, I had already used it. This was what bricked my I-mate Jam, in the first place. I tried using the NO_ID tool, to try to connect with my device, but it keeps saying that my unit is not designed for this tool.
Click to expand...
Click to collapse
Hi, sorry for the late reply, i used the one named : JAM_UK_Aus_11200_171_11 CDL
hope this helps,
i have now purchased a t-mobile mda 2 but i am having problems with this sim card as it will not recognise any sims i put into it, i have had a bad time with these HTC's that maybe i will not buy any more, this new one i have is my 3rd i think
I got the unit re-flashed with the 'big ROM' versiosion.
The unit now works, but I want to get my other Charmer working now. It shows the bootscreen, then the device turns itself off. I have to remove/re-insert the battery, then do a hard reset to ge it back on.
Nokia 3650 said:
I got the unit re-flashed with the 'big ROM' versiosion.
The unit now works, but I want to get my other Charmer working now. It shows the bootscreen, then the device turns itself off. I have to remove/re-insert the battery, then do a hard reset to ge it back on.
Click to expand...
Click to collapse
hi, again sorry for very very late reply, i now fix these PDA's, have you managed to fix your charmer?
No. I haven't fixed the Charmer as yet. I gave up on that project, as it seemed to be more a hardware problem than the actual firmware.
I'll PM you more on this shortly.
Nokia 3650 said:
No. I haven't fixed the Charmer as yet. I gave up on that project, as it seemed to be more a hardware problem than the actual firmware.
I'll PM you more on this shortly.
Click to expand...
Click to collapse
yeah sure PM me any time, thanks
I am not able to access the bootloader by pressing the three buttons. Device freezes on a black screen. What is the solution?
I have a BIG problem because I install this app 'EveryWAN-Remote-Support-3-0-15760' from this http://www.sparus-software.com/spip....wnload&lang=en and I don't know why... my HD is death now I was in activesync with this app and I try all tools TaskManager, FileStorage and when I click the icon 'turn-off screen'... no more HD..., no charge... dont soft-reset, don't bootloader, etc. I'am now very un-happy because I don't understand what's happen with my HD
If nothing else work, why don't you try a hard reset?
http://www.youtube.com/watch?v=puL795s1bY4 <- second half of the video is how you do it.
Hi,
Have you tried to remove the battery, wait a little, and place it back?
Also, refer to this thread:
http://forum.xda-developers.com/showthread.php?t=465601
Regards,
P.
Thanks for your help... I know do a Hard-Reset but the problem is don't charge, don't show the red led in top charging also, I put off the battery 20 minutes and no way... don't work the button Power... don't work the button Soft-Reset, I can't enter in Bootloader mode...
Hi,
Have you checked that thread I mentioned?
Look specially at this post:
pdc4 said:
Well, some other things to try:
- check if some button (including soft reset) is mal-functioning. Try to release, or clean them.
- is any card (sim or memory) in the phone? If yes, remove them.
- has the phone been exposed to moisture, liquids? ensure that it is dried out, but do not expose it directly to heat or to a dryer...
- try to connect the charger to the phone without battery, leave it a little then disconnect, then place battery and finally the charger , trying to power on
- have you contacted the author of the rom about the issue? Maybe he might have some ideas ...
Good luck!
Regards,
P.
Click to expand...
Click to collapse
Yes I check and I follow all... my Rom is Pzucchell 1.7 but... when I have this problem... I was in AS with this app EveryWAN Remote and like I say before... when I click Turn-off screen I only see similar this http://forum.xda-developers.com/showpost.php?p=3106017&postcount=22