Can't Access SD Card - MDA II, XDA II, 2060 General

I have bought a sandisk WiFi-256MB SD Card, but some reason it will not work with my QTek 2020.
I have deinstalled the software and after that mij old SD-card (MMC) is not recognized anymore!
I have discovered it handles about 2 files:
SDBusDriver.dll: date: 17-2-2004; 5:58; 40,5 Kb
SDMemory.dll: date: 17-2-2004; 5:58; 12,5 Kb
The installation process has changed the 2 files. The original where from a later date!
How can i have access to my SDcard again? Doe anyone know amy trick to reinstall the drivers of the SD-card?
Maybe i can get the 2 original files from someone!
Information about the QTek 2020
--------------------------------------
ROM version: 1.72.00WWE
ROM date: 03/15/04
Radio version: 1.14.00
Protocol version: 1337.24
ExtROM version: 1.72.730

Related

How to upgrade T-mobile wothout SD card ?

How to upgrade T-mobile wit bootloader ? I haven't any prog, and haven't SD card. T-mobile cannot accept Programme A "connection error"
You have nothing, you do nothing!
or ask an expert to do it without risk!
Ok, one years ago I upgraded this O2 with bootloader + serial cable. Now, I upgrade to t-mobile firmware and can not accept programme A. I cant remember what is the name of software (serial upgrede,with bootloader)
Ok first go to Start, Settings, System, Device Information and post whats listed as this will give us some insight in to your device.
HTH
ROM: 4.00.16 ENG
Radio: 4.16.00
Protocol: 32S54
PW10B1
Wadarr said:
ROM: 4.00.16 ENG
Radio: 4.16.00
Protocol: 32S54
PW10B1
Click to expand...
Click to collapse
Your XDA version cannot work with programm A.
you need buy SD card and SD card writer!
You don't have these things, so you cannot do anything! :roll:
but a usb sdwriter really dont cost all that much
nor does a sd flash card unless you want it to be bigger then 128MB
Ohh ****.... so, it is impossible to flash with serial or usb cable and bootloader 5.14 ? Yesterday it was a PW10A1.....
anyone have 3.12 or earlier PPC version in .nbf file ? I have 32 mb SD card, but 3.17 is bigger than 32 mb. (32.2)
Wadarr said:
anyone have 3.12 or earlier PPC version in .nbf file ? I have 32 mb SD card, but 3.17 is bigger than 32 mb. (32.2)
Click to expand...
Click to collapse
I have 3.08.09 ROM!
You must use TMO2003.exe update program.
When it run, it will install all file on c:\program files\ruu\..
It will check rom version on c:\program files\ruu\english\NK.nb1
When it chech rom pass copy your own rom(o2 or other ....) to c:\program files\ruu\english\ then press Next.
When you finish rom update you must run o2 program B to update your radio stack.

could not write to sd-card but read and run progs %-(

Hi,
I could not write anything to my sd card (512 mb kingston), but could write on it over card-reader, tried already other card - no success!
"... this media is write protected " - but it is definetly not!
Tried new rom´s too!
Do you think it´s a harware problem?
thanks and best reg
flo
__________________________
t-mobile magician
rom ver: 1.12.00 wwe
rom date: 05/28/05
Radio ver:1.13.00
Protocol version: 13337.43
ExtRom ver: no
no big storage
floyd007,
Funny you should mention that. I have a Sandisc 1G card and when I try to do any removal or adding to when its in my card reader it says the same media is write protected when I know that it isnt. When I stick er in my Jam its fine, Whats Up! :shock:
I´ll send you mine and get yours?
perhaps we should try a special format solution but wich one?
________________
t-mobile Magician
rom ver: 1.12.00 wwe
rom date: 05/28/05
Radio ver:1.13.00
Protocol version: 13337.43
ExtRom ver: no
no big storage
If it is an sd card and the write protect is in the off position, then try sticking a piece of tape over the gap where the switch is on the card to completely cover it.
thanks cruisin,
I tried this, but no success!
tried new card export II to simulate storage mass - no success!
I think I must send the magician to service!
I had the same trouble with my Compact and it was solved after removing ActiveSync

Turning ON TyTN

Hi,
I'm new with my TyTN, I having some problems with it. I using it with 32 MB microSD card for now, while my another card comes from retailer. I installed ALL APPS in the microSD card.
My problem: when I come from area with very little or none signal, then i go to strong signal area my TyTN do not turn on, I mean, I press the button but screen keeps off. I must to press reset button for recover from that state.
Some body knows why it is happening? and... how I can fix it?
Phone Info:
ROM version: 1.18.255.3
ROM date: 07/22/06
Radio version: 1.03.03.10
ExtROM version: 1.18.255.106
HTC TyTN unlocked and unbranded.
Best Regards,
Taguapire.

SD card issues and a couple of other questions

Hello,
1. I keep having the same issue with my I-mate Jam (originally purchased from Orange Israel). Every now and then I get a prompt saying the SD card is unreadable and whether I wish to format it. The data on the card itself remains intact and perfectly readable. Is there any known solution to this? The SD card is a Kingston 512Mb standard SD.
2. I wish to purchase a larger SD card. Any known size limit to those? I've bumped into 4 GB cards. Are these supported by the magician?
3. I wish to clear the call duration counters, any known way to do this?
Thank you in advance,
Lior, Israel.
ROM version: 1.12.00 WWE
ROM date: 05/28/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version: 1.12.128 WWE
I've always used SanDisk standard cards without any problems and currently using a 2GB where all the TT West EU and USA+Canada maps are installed. Ultra II or III are just a waste of money since there is no speed gain in the Magician. Some users have tried 4GB RS MMC cards but there's are mix feelings. I suggest you search for the thread and read through it.
Here's another thread regarding SD Card size/formatting issues: http://forum.xda-developers.com/showthread.php?t=282104
I have seen another posting on resetting call duration - search for it, and you'll find it. I think it involves HEX editing, and the instructions may have been for a specific phone model.

VF UK 1.72 rom and SD recognition

I recently loaded the VF UK rom upgrade to 1.72
Details
1.72.161.3 dated 24/03/2010 (82124) WWE
Protocol 15.32.50.07U
OS 5.2.21869(21869.5.0.82)
Manila 2.5.20121429.0
I have the following problem:
Attach phone via usb to pc, select Disk drive.
Remove hardware (SD) from pc - sucessfully removed
phone does not re-aquire the SD, not shown under file manager and attempts to run sd loaded programs fail.
removing SD and putting back in does not force phone to re-aquire
Soft reset to fix.
works fine via active sync
previous 1.66 rom worked fine
Any ideas

Categories

Resources