when the waiting call is finish, there is no sound in the current call,
the counter still running but there is no sound
what should i do?
thank you!!
Ive got an xda 2 and after using an unlock code from here now my phone is mute on waiting calls, ive checked everything , ive tried every possible methods but i keep getting no sound when im dialing anyone ...who ever im dialing recieves my call but they cant hear me its complete mute like theres no connection but my credits going on the other hand. is there anyone who can help please? i wished i never tried to unlock it on vodafone
i happen to have the same problem here & would appreciate any thoughts
and i cant talk back when my phone in is my carkit
i can hear them but they cant hear me
i tried another xda2 in my carkit and then there is NO problem
i tried my xda2 in another carkit and same problem
Related
There seems to be a very annoying bug on my new XDAII that is running the 1.6O O2 ROM.
If I am on the phone and i receive a call that alerts me that there is a call is waiting, and I decline to answer it, the sound is cut off and I can't hear the caller anymore. Cancelling the current call and re-dialling is the only way of getting 'sound back'.
Furthtermore, another irritating bug is that if the phone rings and I answer after only 1-2 rings, I can't hear anything for a few seconds and have to wait those couple of seconds before i can speak to the other person. This doesn't seem to happen if the call is answered after 3-4 rings.
Any help would be appreciated.
Me too - only answer I found was to turn off call waiting.
Poor solution.
Same for me, i too had to turn off call waiting, however i found that if you are using a bluetooth headset when the second call comes in and you decline to answer it, it just transfers the current call the the phone and you can continue it there
Same problem here.
I find that if you put the call on hold and then resume - the voice will come back.
VERY irritating.
Same for me too, I have T-Mobile 1.60 and using BTHTools 1.1.0.0...
Do you use BTHTools?
yes l am using BT tools.
regards,
hasnain
I performed a hard reset...
Did NOT install BT Tools - and had the same problem.
Mine did this long before using BT tools also.
I also have the same problem....
Is it an incompatibility between the phone and Bt Tools?
Is there any solution other than turning off call waiting?
Does anyone face the 2nd problem that I mentioned:
Sometimes when I pick up the phone after it rings, it takes a couple of seconds before i can hear the caller. This happens more often when picking the phone up within 1 or 2 rings.
This problem was aroung in the I-mate ROM 1.66.
They fixed both with the 1.72 ROM.
ketinson said:
This problem was aroung in the I-mate ROM 1.66.
They fixed both with the 1.72 ROM.
Click to expand...
Click to collapse
i DON'T THINK THIS IS FIXED IN 1.72. i STILL HAVE THESE SAME PROBLEMS TOO, RUNNING t-MOBILE 1.72.
While running 1.60 I replaced the Radio Stack only with the O2 original release version - sorry don't remember version number - and it worked without these two very annoying bugs in the phone. i think it is a problem with the readio stack version only.
After losing the voice with an incoming call I can get the voice back without redialing by placing the call on hold and then resuming.
I have the same problems with or without bluetooth tools and with or without a BT headset.
Now, I have T-Mobile's 1.72 installed and am afraid to reload the working radio stack becasue of the "downgrade disaster" with 1.72. I am anxiously waiting for either a stable 1.72 or XDA Developers to help us out of this mess with this ****ty ROM.
This forum is fantastic. Thanks to everyone.
Steve
I had the problem in the 1.66 ROM, and no longer have it with 1.72!
I've just installed the new O2 1.72 ROM and am still having the same problem.
I am also suffering from a problem I was having on the old ROM. Many times when I receive a call and press the green answer button, it takes between 2-5 seconds for me to hear the person calling. The person calling also hears a similar period of slience before he/she can hear me.
The same thing also happens sometimes when I call out, where only once 2-3 rings into the call or if the other party has already picked up thephone can I hear or say something.
I'm not sure if caller ID or Photo ID has anything to do with it as I have around 1380 contacts on my xda.
This problem is extremely annoying and was wondering if there is anyone out there who has faced the problem and may have an answer for it.
Us too
We have two xda2 with 1.72, and same thing, there is a 5 second delay upon recieving any call, and sometimes there is a hangup duriong call waiting???
I never had that problem until I installed Bluetooth Tools...now it always happens. Though as someone's suggested, holding and resuming seems to do the trick.
Been having a problem on my XDA II in that when I receive a call and answer it, it takes a few seconds before I can hear the other person. Sometime it woks fine and others the person can hear me but I can't hear them ?
It has been back for repair 3 times and it still does the same thing. The speaker is fine as it works loud and clear, it's only on incoming calls not on outgoing.
The place where I have bought it will now swap it out for a XDA IIi as you cant get the II anymore around here. That's great but I would still like to know why it went wrong ? Anyone got any clues ?
plz explain what is delayed.
Could it be just too much s/w running?
I found that when I am running activesync, calendar & contacts sometimes there is an awful delay in the response of the MDAII. Especially the BT headset has delays then of more then 20seconds (so I answer call on MDAII and then transfer it to headset when this occurs).
delay on phone
:shock: Me too!
Not sure if I should answer on screen,accept or reject,or green button.Both seem to delay,often with caller ringing again.
When the phone rings and you answer it. You hear nothing. It's a case of hello ? hello ? etc. They can hear you but I can't hear them then all of a sudden their sound will just kick in.
Actually sometimes when I dial out, I never hear a ringing tone and all of a sudden the person cuts in.
There is a delay. I have no software running at all. It does this from a hard reset as well.
What bugs me is that it has gone back 3 times and they claim it has been tested and fixed. It clearly hasn't.
Hope the XDA IIi is better, cos this was very annoying.
Hi Ekko,
Would you happen to be running Pocket Bluetooth Tools?
Cheers,
Pete
Hi, the phone was fine until about 6 mths old when it started doing this. I had Pocket Bluetooth on it and it used to be totally fine. This never affected it at all.
Obviously once this problem arose, I have hard reset the machine on a number of occasions and have used it as a clean machine. Same problem ? So not down to Bluetooth Tools.
Hands Free mode
In order to use an Himalaya with a BT headset you need to run 2.20 translated. The Hands Free profile works better and it will even support caller ID and there is no delay when answering calls.
I have an 02 atom and it is having problems with sound.... It makes no sound at all when I select and click on things or make a call. It rings if i call it but i can here anything on the other end. I have worked out that if I turn on the radio function it then makes sounds when I click on things and tap the screen but as soon as i turn the radio off it makes no sound. With the radio on I still cant hear anything in calls as it turns the radio off when I dial. Any ideas?? Warranty isnt an option as i purchased it 2nd hand over ebay. If i need to reload roms can you p-lease give me a link as im completely new to this PDA phone business...
I had same problem....but solved it!
Sent mine away for Warranty repair, came back fixed... then it happened again in like 2 weeks.
BUT I found a solution
You need to use ur headphones and plug in about 2/3 then wriggle towards the front, i think it just a connection issue, and you can hear all things when the radio is on because the radio can play via the phones and speakers at the same time unlike all other sounds.
M4tR1X
Fight Crime. Shoot Back!
No noise
Hi I have same problem my phones sound has gone. I cant use phonespeaker and Microphone during a phone conversation. There is no sound from speakers when media playing and notifications, warnings. The interesting thing is its ringing when an incoming call comes. I can use the headset without a problem. Also bluetooth headset is working. I wrote to O2 support and they suggested me to do hard reset. But I had allready done it seveeral times and I upgraded my rom. Finally they told me to send it to Honk Kong. I am living in Turkey and its not a good idea. Can anyone help me?
Kind Regards.
I solved the problem
kidafa said:
I have an 02 atom and it is having problems with sound.... It makes no sound at all when I select and click on things or make a call. It rings if i call it but i can here anything on the other end. I have worked out that if I turn on the radio function it then makes sounds when I click on things and tap the screen but as soon as i turn the radio off it makes no sound. With the radio on I still cant hear anything in calls as it turns the radio off when I dial. Any ideas?? Warranty isnt an option as i purchased it 2nd hand over ebay. If i need to reload roms can you p-lease give me a link as im completely new to this PDA phone business...
Click to expand...
Click to collapse
Please visit this link do the what "e-rgular" wrote. I did the sama and its now working.
http://www.expansys.se/ft.aspx?i=139074&thread=9
Hi!
I have a problem. Recently I 've installed new rom (touch-it 4.0)on my xperia. Everything was fine but when I plugged my phone to hi-fi, I started having problems.After i unplugged the phone the headphone icon was still on the display bar. I've tried to switch off the phone or even remove the battery but the problem still exist.I am not able to even make a call, without my headset, cause phone still acting like sth was plugged to the mini jack.
Please, do anybody know a solution to this case???
best regards,
Karol
Same...
I've got the same problem. I didn't install any Mod Roms, but Ive heard it could be a hardware problem. All the suggetions didn't work... like unplugg it when you just started a call...
My main problem is that it doesn't play any sounds anymore... Coreplayer says: "Wave Output: Device error!"
Maybe its because i've installed WOW-HD Sound app...
Shouldn't have done so... I guess..
But the headset problem still exists besides the sound prob, cause ive read a lot of stories about exactly this bug...
It's the same at my phone: The headset symbol doesn't disappear when you unplug your headset...
I think i got the worst case: My sound doesnt work so i even cant make calls with the headset... means, left for me is sms and Internet...
Thats why I bought a mobile phone
having thesame icon on my phone too cant hear nothing when receiving a call not ontill i slip in my headphone but my ringer works good thats the reason its amazing that i can hear my ring tone when am been called but cant hear nothing when accepting a call ,till i slip i my head phone,anyone got a solution? try let us know, thanks in advance
My brother just got a wing from one of his freinds today and we did a hard reset but cannot get any sound to come out of the phone when he is on a call. The speaker on the phone works fine, but not the regular sound. We can hear him fine on the other phone but he cannot hear us. Is there a registry hack that will increase the volume, or something we can do to make it work?
Thanks in advanced
I am also having the same issue outgoing calls work just fine but not incoming. Nothing i have tried works i have flashed a new ROM to try and fix it and that didn't help. any suggestions would be great